• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.9 no.1
• /
• pp.136-142
• /
• 2008

Recently, cabled-suspension bridges and suspension bridge have been increasingly built in korea. But such structures were often damaged by fire due to car collison. In this study, the cabled-suspension bridges constructed under the kind of the project of national road aggrandizement are modeled using Solid Works 2007. The COSMOS FloWorks 2007 software are used for Heat Transfer Analysis and Thermal Stress Analysis. The safety of wire, HDPE pipe and stainless steel pipe are investigated. The major variables for the analysis are the temperature of the heat source, the distance between the fire-proof bulk head and the heat source, wind velocity, and the height of the end of Stainless steel pipe.

• Journal of Auto-vehicle Safety Association
• /
• v.14 no.3
• /
• pp.23-29
• /
• 2022

Among the various functions of ADAS (Advanced Driver Assistance System), the most important and representative function to the safety of vehicle passengers is AEB (Autonomous Emergency Braking system). In South Korea, laws are in progress from 2022 for making it mandatory for passenger vehicles to be installed. And as AEB-equipped vehicles continues to increase in the future, the demand for accident analysis related to the AEB function is expected to increase in the future. In order to find out the operating limits of AEB, it is necessary to consider the situations exceeding the standards covered by EuroNCAP. Therefore we have performed four experiments in this study, including situations encountered in real-word traffic conditions, i.e., an oblique stop of Global Vehicle Target (GVT) and ADAS sensor failures. These experimental results are expected to be of great help in accurate and reliable accident analysis by considering them when analyzing traffic accidents for ADAS vehicles.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.25 no.7
• /
• pp.962-970
• /
• 2021

The cause of the majority of vehicle accidents is a safety issue due to the driver's inattention, such as drowsy driving. A forward collision warning system (FCWS) can significantly reduce the number and severity of accidents by detecting the risk of collision with vehicles in front and providing an advanced warning signal to the driver. This paper describes a low power embedded system based FCWS for safety. The algorithm computes time to collision (TTC) through detection, tracking, distance calculation for the vehicle ahead and current vehicle speed information with a single camera. Additionally, in order to operate in real time even in a low-performance embedded system, an optimization technique in the program with high and low levels will be introduced. The system has been tested through the driving video of the vehicle in the embedded system. As a result of using the optimization technique, the execution time was about 170 times faster than that when using the previous non-optimized process.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.23 no.9
• /
• pp.1088-1095
• /
• 2019

The information and communication technology that is being developed recently has been greatly influencing the automobile market. In recent years, devices equipped with IT technology have been installed for the safety and convenience of the driver. However, it has the advantage of increased convenience as well as the disadvantage of increasing traffic accidents due to driver's distraction. In order to prevent such accidents, it is necessary to develop safety systems of various types and ways. In this paper implements a platform that can recognize LDWS and FCWS and PDWS by using a single camera without using radar sensor and camera fusion and stereo camera method using two or more sensors, and proposes to study multi-function driving safety platform using a single camera by analyzing recognition rate evaluation and validity on a vehicle.

• Journal of Platform Technology
• /
• v.9 no.4
• /
• pp.71-78
• /
• 2021

Self-driving vehicles are increasing as new alternatives to solving problems such as human safety, environment and aging. And such technology development has a great ripple effect on other industries. However, various problems are occurring. The number of casualties caused by self-driving is increasing. Although the collision of fixed obstacles is somewhat decreasing, on the contrary, the technology by active obstacles is still insignificant. Therefore, in this study, in order to solve the core problem of self-driving vehicles, we propose a method of extracting active obstacles on the road. First, a center scene is extracted from a continuous image. In addition, it was proposed to extract activity obstacles using activity size and activity repeatability information from objects included in the center scene. The center scene is calculated using region segmentation and merging. Based on these results, the size of the frequency for each pixel in the region was calculated and the size of the activity of the obstacle was calculated using information that frequently appears in activity. Compared to the results extracted directly by humans, the extraction accuracy was somewhat lower, but satisfactory results were obtained. Therefore, it is believed that the proposed method will contribute to solving the problems of self-driving and reducing human accidents.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.8 no.5
• /
• pp.85-97
• /
• 2009

Continuous increase of traffic demand has caused confirmed congestion, fuel consumption, emission, safety, etc. as serious social problems at the present time. The Smart Highway Project has been conducted by the supervision of Ministry of Land, Transport and Maritime Affaire to solve such problems since 2007. The Smart Highway Project includes LDWS (Lane Departure Warning System), a system to prevent broadside collisions and accidents, as a sub-technology of road-vehicle associating technologies. This system warns drivers when their vehicle deviates from the lane where they are traveling at high-speed on the highway. In this paper, the LDWS was evaluated using CBA to analyze the socio-economic consequences. Estimated benefits include reduction of accidents and convenience of drivers. In addition, the economics according to the distribution rate is various when it comes to Lane Departure Warning Technology, the economics of both cases - positive scenario and negative scenario, which was analyzed. As a result, the Benefit-Cost ratio(B/C) of negative scenario showed 0.97 in 2020 and 1.36 in 2030 while B/C ratio of the positive scenario showed 1.04 in 2020 and 1.59 in 2030, which indicated that the higher distribution rate is, the higher the economics generates. Therefore, it is judged that the introduction of Lane Departure Warning Technology will result in high economics.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.8 no.5
• /
• pp.23-33
• /
• 2008

Extra dosed bridge among the Cabled-stayed bridges have been increasingly built in korea in recently. But such bridges were often damaged by fire due to car collison. In this study Extra dosed bridges among the cabled-supported bridges are selected to analysis model frequently to be designed and/or constructed in recent and furture in this study. COSMOS FloWorks 2007 software are used for Heat Transfer Analysis and Thermal Stress Analysis. The safety of wire, HDPE pipe and stainless steel pipe are investigated. In the case of the constant of the temperature of the heat source, the significant three variables for the analysis are selected for study : (1) the distance between the fire-proof bulk head and the heat source, (2) wind velocity, (3) the height of the end of Stainless steel pipe.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2020.07a
• /
• pp.259-260
• /
• 2020

기존의 전동휠체어를 사용하는 약자 또는 중증 장애인 등 지체(肢體)가 불편한 사람들이 휠체어 사용 시 생기는 문제점을 해소할 목적으로 시작되었다. 이는 전동휠체어가 보행 기구임에도 자동차에 준하는 교통사고에 대해 무방비하게 노출되고, 중증 장애인에 대한 이동권 보장이 아직 미흡하여 생기는 문제이다. 따라서 본 연구에서는 이러한 문제로 인한 불편함을 해소하고자 아이트래킹을 이용한 스마트 전동휠체어 기술을 적용하고자 한다. 루게릭병 등으로 인해 지체(肢體)의 움직임에 제한이 있는 사람들에게 보호자가 밀어주는 휠체어에 의존하는 것이 아닌 Eye-Tracker를 이용한 시선 추적(Eye-Tracking) 기술로 휠체어 동작이 가능하다. Web-Cam과 라즈베리 파이를 통해 얻은 전·후·좌·우의 영상정보를 디스플레이 화면에 송출한다. 그 후 Eye-Tracking 기술을 이용해 디스플레이 화면에 표시된 전·후·좌·우 이동에 관한 UI(User Interface)룰 사용자가 송출된 영상을 보면서 눈의 움직임만으로 선택해 휠체어의 방향을 제어한다. 또한 전동휠체어의 조작 실수로 다른 행인 또는 장애물과 충돌하는 문제점을 초음파 센서를 이용하여 일정 거리 내에 사물이나 사람이 있을 경우 디스플레이 화면에 경고표시 및 경고음, 각 초음파 센서 위치에 맞는 LED작동으로 사용자들에게 추돌 위험경고와 함께 장애물의 위치파악이 가능하도록 한다. 따라서 스마트 전동휠체어를 통하여 수동적인 움직임이 아닌 능동적이고, 초음파 센서로 인해 안전한 이동이 가능하게 한다.

• Journal of Auto-vehicle Safety Association
• /
• v.10 no.4
• /
• pp.7-12
• /
• 2018

Injury mechanisms of lower extremity injuries in motor vehicle accidents are focused on fractures, sprains, and contusions. The purpose of this study is to evaluate the analysis of lower extremity injury mechanism in occupant motor vehicle accident by using Hospital Information System (HIS) and reconstruction program, based on the materials related to motor vehicle accidents. Among patients who visited the emergency department of Wonju Severance Christian Hospital due to motor vehicle accidents from August 2012 to February 2014, we collected data on patients with agreement for taking the damaged vehicle's photos. After obtaining the verbal consent from the patient, we asked about the cause of the accident, information on vehicle involved in the accident, and the location of car repair shop. The photos of the damaged vehicle were taken on the basis of front, rear, left side and right side. Damage to the vehicle was presented using the CDC code by analytical study of photo-images of the damaged vehicle, and a trauma score was used for medical examination of the severity of the patient's injury. Among the 1,699 patients due to motor vehicle crashes, 88 (5.2%) received a diagnosis of lower extremity fracture and 141 (8.3%) were the severe who had ISS over 15. Nevertheless during 19 months for research, it was difficult to build up in-depth database about motor vehicle crashes. It has a limitation on collecting data because not only the system for constructing database about motor vehicle crash is not organized but also the process for demanding materials is not available due to prevention of personal information. For accurate analysis of the relationship between occupant injury and vehicle damage in motor vehicle crashes, build-up of an in-depth database through carrying out various policies for motor vehicle crashes is necessary for sure.

• Composites Research
• /
• v.20 no.3
• /
• pp.8-16
• /
• 2007

Bending collapse of light-weight square tubes used for vehicle structure components is a dominant failure mode in oblique collision and rollover of vehicles. In this paper bending performances of aluminum-GFRP hybrid tube beams were evaluated in relation with bending deformation behavior and energy absorption characteristics. Aluminum/GFRP hybrid tube beams fabricated by inserting adhesive film between prepreg and metal layer were used in the bending test. Failure mechanisms of hybrid tubes under a bending load were experimentally investigated to analyze the bending performance as a function of ply orientation and composite layer thickness. Ultimate bending moments and energy absorption capacity of hybrid tube beams were obtained from the measured load-displacement corves. It was found that aluminum/GFRP hybrid tubes could be converted to rather stable collapse mode showing excellent energy absorption capacity in comparison to the pure aluminum tube beams. In particular, the hybrid tube beam with $[0^{\circ}/90^{\circ}]s$ composite layer showed a large improvement by about 78% in energy absorption capacity and by 29% in specific energy absorption.