• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.7 no.6
• /
• pp.1142-1148
• /
• 2006

Actually, a present traffic accident detection system is subsisting limitation of accurate distinction under the crowded condition at intersection because the system depend upon mainly the image information at intersection and digital image processing techniques nearly all. To complement this insufficiency, this article aims to estimate the level of present technology and a realistic possibility by analyzing the acoustic characteristic of crash sound that we have to investigate fur improvement of traffic accident detection rate at intersection. The skid sound of traffic accident was showed the special pattern at 1[KHz])$\sim$3[KHz] bandwidth when vehicles are almost never operated in and around intersection. Also, the frequency bandwidth of vehicle crash sound was showed sound pressure difference over 30[dB] higher than when there is no occurrence of traffic accident below 500[Hz].

• Transactions of the Korean Society of Automotive Engineers
• /
• v.10 no.4
• /
• pp.192-198
• /
• 2002

There are genuine parts, non-genuine parts and recycled parts which can be replaced for the repair of damaged parts of crashed cars. It is the recent trend in korea that recycled C. V joints are more popular than the genuine parts fur repairing crashed cars due to the cost. Performance of recycled C. V. joints as replacement parts was tested and analysed in this study. To examine the durability of the recycled parts, the replaced C. V joints after repair were tested and analysed periodically. The results were showed that basic performance of the recycled parts was normal. However ball cage was more frequently damaged than genuine parts. We concluded that a standard test for recycled parts is required to get a safe and durable parts.

• Journal of the Korean Society of Mechanical Technology
• /
• v.13 no.1
• /
• pp.49-56
• /
• 2011

The neck injury occupies the most of injury that happened by the rear impact car accident. This study was analyzed about influence of the neck injury in low speed rear impact and car crash accident investigation. There is no neck injury in low speed side rear impact. On the other hand, there is initial neck injury symptom of 10 % but no long-term neck injury symptom in low speed offset rear impact. It appeared that the possibility of neck injury in low speed rear impact is low. For the more study about the neck injury, it should be evaluate the effects of the car body structure, frame structure and rear crash pattern.

• Journal of Korea Society of Industrial Information Systems
• /
• v.29 no.1
• /
• pp.91-105
• /
• 2024

Car accidents occur as a result of collisions between vehicles, leading to both vehicle damage and personal and material losses. This study developed a vehicle accident detection model based on 2,550 image frames extracted from car accident videos uploaded to YouTube, captured by CCTV. To preprocess the data, bounding boxes were annotated using roboflow.com, and the dataset was augmented by flipping images at various angles. The You Only Look Once version 8 (YOLOv8) model was employed for training, achieving an average accuracy of 0.954 in accident detection. The proposed model holds practical significance by facilitating prompt alarm transmission in emergency situations. Furthermore, it contributes to the research on developing an effective and efficient mechanism for vehicle accident detection, which can be utilized on devices like smartphones. Future research aims to refine the detection capabilities by integrating additional data including sound.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2017.04a
• /
• pp.767-768
• /
• 2017

국토교통부에 따르면 2014년, 대한민국의 자동차 1대당 인구수가 2.56명으로 기록되었다고 한다. 또한, 교통안전공단에 의하면, 2015년 총 교통사고는 23만 2035건이 발생하였고 이로 인한 사망자는 4621명이라고 한다. 그 중 약 53%인 12만 3760건이 폭이 9m 미만인 이면도로에서 발생하였고 이로 인한 사망자는 전체 사망자의 약 56%인 2586명이라고 한다. 이는 상당히 수의 사고들이 이면도로에서 일어나고 있음을 알려준다. 국민 안전의 측면에서 많은 사고의 위험이 있는 이면도로에 사고를 예방할 수 있는 대책이 시급하다. 이에 본 논문에서 IoT(사물인터넷)을 기반으로 한 이면도로에서의 사고 예방 장치를 제시하여 '차량과 차량'뿐만 아니라 '차량과 보행자', '차량과 자전거' 충돌사고 문제해결에 접목하였다.

• Electric Engineers Magazine
• /
• v.257 no.1
• /
• pp.21-23
• /
• 2004

2.부하의 개폐(load switching) - 번개가 거의 모든 사람들이 인식할 수 있는 문제인 반면 Switching Surge에 의한 TVS는 대다수가 볼 수 없고 인식할 수 없는 것이다. 전력회사는 아마도 발전된 전력 공급을 위해 1개 이상의 공급원을 사용할 것이다. 자동차와 전주 혹은 나뭇가지와 전선이 충돌하는 사고가 발생할 경우 전력회사의 장비는 즉시 선로이상을 찾아 내어 선로를 OFF시키는 조치를 취한다. 전력 Feeder와 load(부하)의 결과적인 전환으로 강력한 Surge가 발생하게 된다.(중략)

• Journal of the KSME
• /
• v.31 no.4
• /
• pp.341-347
• /
• 1991

새로운 차종이 시장에 데뷔하기 위해서는 일반적으로 상품 기획에서부터 설계, 홍보까지의 수 백명의 인원과 4∼5년의 개발시간이 집중 투입된다. 자동차 회사로서는 신차를 개발 판매하기 위하여 개발, 설비를 포함한 거액의 투자를 필요로 하고 그나마 성공의 보장은 없다. 주행시 쾌적한 차량, 충돌 사고시의 승객보호 등의 고객의 요구와 강화되는 배기 규제, 환경 소음 대응, 차량개발 기간의 단축을 실현하기 위하여 컴퓨터에 의한 해석기술에 대한 요구는 증대하며, 또한 다양화해진다. 본 글에서는 이러한 개발 단계에서 중요한 한 부분인 해석 분야의 업무를 설명 하고 각 업무에 대하여 간략히 언급하기로 한다.

• Journal of Auto-vehicle Safety Association
• /
• v.10 no.4
• /
• pp.54-59
• /
• 2018

While the advanced trffic environment systems are developed recently, the traffic systems for transportation vulnerable are still under development and their social life are limited as well. In order to the secure their mobility rights, it had been required to set up the particular system for the traffic welfare. One of the significant items is the express bus operation for wheelchair users. Thus, the research of development and operation for express buses with wheelchair users was funded by the Korean government. Before the express bus development for wheelchair users based on the current bus model, this study set up the evaluation method for the bus rollover characteristics to ensure occupant safety using the finite element method. The partial bus model was developed corresponding to the full bus model response under rollover event and the evaluation method based on two model (full bus model and partial bus model) responses is planned to apply the model development of express bus modification for wheelchair users.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.18 no.3
• /
• pp.104-109
• /
• 2010

The fatality of pedestrian accounts for about 21.2% of all fatality at 2007 year in Korea. In car to pedestrian accident it is very important to inspect the throw distance of pedestrian after collision for exact reconstructing of the accident. The variables that influence on the throw distance of pedestrian can be classified into the factors of vehicle and pedestrian, and road condition. It was simulated by PC-CRASH, a kinetic analysis program for a traffic accident in sedan type vehicle and SPSS program was used for regression analysis. From the results, the throw distance of pedestrian increased with the increasing of vehicle velocity, and decreased with the increasing of impact offset. Also it decreased with the increasing of velocity of pedestrian at accident, and throw distance at the road condition of wet was longer than that at dry condition. Finally, the regression model of sedan type vehicle on the throw distance of pedestrian was as follows; $$dist_i=2.39-0.11offset_i+0.59speed_i-545height_i-0.25walk_i+2.78wet_i+{\epsilon}_i$$.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.23 no.3
• /
• pp.254-262
• /
• 2015

This paper presents 3D collision deformation modelling methodologies using photogrammetry for reconstruction of vehicle accidents. A vehicle's deformation shape in collision provides important information on how the vehicle collided. So effective measurement(scanning) and construction of a corresponding appropriate model are essential in the analysis of collision deformation shape for obtaining much information related to collision accident. Two measurement methods were used in this study: Indirect-photogrammetry which requires relatively small amount of photos or videos, and direct-photogrammetry which requires large amount of photos directly taken for the purpose of 3D modelling. When the indirect-photogrammetry method, which was mainly used in this study, lacked enough photographic information, already secured 2D numerical deformation data was used as a compensation. This made 3D collision deformation modelling for accident reconstruction analysis possible.