• Journal of Navigation and Port Research
• /
• v.28 no.3
• /
• pp.213-219
• /
• 2004

In this paper, a LNA(Low Noise Amplifier) has been developed, which is operating at L-band i.e., 1452∼1492 MHz for satellite DAB(Digital Audio Brcadcasting) receiver. The LNA is designed to improve input and output reflection coefficient and VSWR(Voltage Standing Wave Ratio) by balanced amplifier. The LNA consists of low noise amplification stage and gain amplification stage, which make a using of GaAs FET ATF-10136 and VNA-25 respectively, and is fabricated by hybrid method. To supply most suitable voltage and current, active bias circuit is designed Active biasing offers the advantage that variations in $V_P$ and $I_{DSS}$ will not necessitate a change in either the source or drain resistor value for a given bias condition. The active bias network automatically sets $V_{gs}$ for the desired drain voltage and drain current. The LNA is fabricated on FR-4 substrate with RF circuit and bias circuit, and integrated in aluminum housing. As a reults, the characteristics of the LNA implemented more than 32 dB in gain. 0.2 dB in gain flatness. lower than 0.95 dB in noise figure, 1.28 and 1.43 each input and output VSWR, and -13 dBm in $P_{1dB}$.

• Journal of Bio-Environment Control
• /
• v.9 no.1
• /
• pp.66-72
• /
• 2000

Effects of irrigation control by time and integrated solar radiation on musknelon quality in perlite culture were investigated. Sugar content of melon flesh was high in the irrigation treatment at the following times 6：00, 8：00, 10：00, 11：00, 12：00, 12：30, 13：00, 13：30, 14：00, 14：30, 15：00, 16：00, and 17：00(T-2), compared to the irrigation treatment at every hour from 6：00 to 18：00(T-1) within the irrigation experiment controlled by time. Within the irrigation experiment controlled by integrated solar radiation, sugar content was as high as 15.7(Brix$^{\circ}$) in the 240Wh.m$^{-2}$ , compared to the 180, the 200, and the 220Wh.m$^{-2}$ . Fruit firmness was low in T-2 within the Irrigation experiment by time and in the 220Wh.m$^{-2}$ within the irrigation experiment by integrated solar radiation. Fruit size was smaller in the treatment controlled by integrated solar radiation than by the time treatment. Fruit weight was the heaviest in T-1. The weight of the shoot except for the fruit was lower in treatment of irrigation by integrated solar radiation than by time. In conclusion it is suggested that the appropriate integrated solar radiation pet each irrigation cycle should be 180~20Wh.m$^{-2}$ in the early growing stage, and then gradually increased to 240Wh.m$^{-2}$ from net formation to harvest time.

• Journal of IKEEE
• /
• v.24 no.3
• /
• pp.913-916
• /
• 2020

In this paper, we propose the development of nitrogen cooling equipment for personalized local area. The proposed equipment consists of a cold air supply module, a body, and nitrogen injection with the following characteristics. First, it automatically controls the amount and time of cold air supply by utilizing information measuring skin temperature with volumetric temperature sensors, so it can have a competitive edge in function by ensuring complete safety. Second, if the distance measuring sensor is applied to the skin for more than a certain distance, it can block the cold air or control the discharge of nitrogen in conjunction with the control GUI to improve the efficiency of higher cooling therapy while providing safe management. Third, by installing a control module that can control the supply of nitrogen, the cost of maintenance can be minimized by minimizing the loss of nitrogen. Experiments at an external testing agency to evaluate the performance of the proposed equipment showed that the accuracy of the temperature sensor was measured in the range of ±3.8%, which is lower than the world's highest level(±5%), with a range of 110℃ to -160℃ similar to the world's highest level. Distance accuracy was measured in the range of ±3.0%, lower than the world's highest level(±5%), and weight accuracy in the range of ±0.1%, lower than the world's highest level(±5%). In addition, emission control was measured in four stages, higher than the world's highest level(stage 1) and nitrogen use was measured at 0.8L/min below the world's highest(6L/min). Therefore, the effectiveness of the methods proposed in this paper was demonstrated because they produced the same results as the world's highest levels.

• Analytical Science and Technology
• /
• v.28 no.1
• /
• pp.26-32
• /
• 2015

The consistency and homogeneity of repetitive printing of artificial fingerprint were evaluated using a visual minutiae comparison method and an Automated Fingerprint Identification System (AFIS). The standard latent fingerprint pattern was prepared by the printing of a master digital fingerprint pattern with an inkjet printer cartridge case filled with artificial sweat. The master digital fingerprint pattern was prepared with a scanning of an inked fingerprint pattern of a living subject. The intensities of the master digital fingerprint pattern were adjusted by changing the 'output level' values of the Adobe Photoshop CS 5 software. Number of standard latent fingerprint patterns were printed and then developed with conventional latent fingerprint developing methods; ninhydrin treatment method and 1,2-indandion(1,2-IND)/$ZnCl_2$ treatment method. The ridge details of the latent fingerprint patterns developed with the reagents were visually compared with the inked fingerprint pattern and could confirm that the minutiae of both patterns are visually identical. The ridge detail of the inked fingerprint and reagent developed standard latent fingerprint patterns were compared with an AFIS. The average number of minutiae searched by the AFIS was $52.4{\pm}2.4$ (range = 48~56) for 50 ninhydrin developed latent fingerprint patterns, and $50.2{\pm}1.9$ (range = 47~53) for 50 1,2-IND/$ZnCl_2$ developed latent fingerprint patterns. These low standard deviation values over 50 repetitive printing demonstrated that the 50 standard latent patterns were printed with consistent and homogeneous manner.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.21 no.3
• /
• pp.600-611
• /
• 1996

Recently, neural network-based speech recognition has been studied to utilize the adaptivity and learnability of neural network models. However, conventional neural network models have difficulty in the co-articulation processing and the boundary detection of similar phonmes of the Korean speech. Also, in case of using one phonotopic map, learning speed may dramatically increase and inaccuracies may be caused because homogeneous learning and recognition method should be applied for heterogenous data. Hence, in this paper, a neural net typewriter has been designed using a hierarchical self-organizing classifier(HSOC), and related algorithms are presented. This HSOC, during its learing stage, distributed phoneme data on hierarchically structured multiple phonotopic maps, using Kohonen's self-organizing feature maps(SOFM). Presented and experimented in this paper were the algorithms for deciding the number of maps, map sizes, the selection of phonemes and their placement per map, an approapriate learning and preprocessing method per map. If maps are divided according to a priorlinguistic knowledge, we would have difficulty in acquiring linguistic knowledge and how to alpply it(e.g., processing extended phonemes). Contrarily, our HSOC has an advantage that multiple phonotopic maps suitable for given input data are self-organizable. The resulting three korean phonotopic maps are optimally labelled and have their own optimal preprocessing schemes, and also confirm to the conventional linguistic knowledge.

• Journal of Bio-Environment Control
• /
• v.29 no.3
• /
• pp.265-276
• /
• 2020

This study was conducted to provide a basis for raising farm income by increasing the yield and extending the cultivation period by creating an environment where crops can be cultivated normally during high temperatures in summer. The maximum cooling load of the multi-span greenhouse with a floor area of 504 ㎡ was found to be 462,609 W, and keeping the greenhouse under 32℃ without shading the greenhouse at a high temperature, it was necessary to fog spray 471.6 L of water per hour. The automatic fog cooling control device was developed to effectively control the fog device, the flow fan, and the light blocking device constituting the fog cooling system. The fog cooling system showed that the temperature of the greenhouse could be lowered by 6℃ than the outside temperature. The relative humidity of the fog-cooled greenhouse was 40-80% during the day, about 20% higher than that of the control greenhouse, and this increase in relative humidity contributed to the growth of cucumbers. The relative humidity of the fog cooling greenhouse during the day was 40-80%, which was about 20% higher than that of the control greenhouse, and this increase in relative humidity contributed to the growth of cucumbers. The yield of cucumbers in the fog-cooled greenhouse was 1.8 times higher in the single-span greenhouse and two times higher in the multi-span greenhouse compared to the control greenhouse.

• Journal of Korea Society of Industrial Information Systems
• /
• v.12 no.4
• /
• pp.138-147
• /
• 2007

Metabolic pathway is a series of chemical reactions occuning within a cell and can be used for drug development and understanding of life phenomenon. Many biologists are trying to extract metabolic pathway information from huge literatures for their metabolic-circuit regulation study. We propose a text-mining technique based on the keyword and pattern. Proposed technique utilizes a web robot to collect huge papers and stores them into a local database. We use gene ontology to increase compound recognition rate and NCBI Tokenizer library to recognize useful information without compound destruction. Furthermore, we obtain useful sentence patterns representing metabolic pathway from papers and KEGG database. We have extracted 66 patterns in 20,000 documents for Glycosphingolipid species from KEGG, a representative metabolic database. We verify our system for nineteen compounds in Glycosphingolipid species. The result shows that the recall is 95.1%, the precision 96.3%, and the processing time 15 seconds. Proposed text mining system is expected to be used for metabolic pathway reconstruction.

• Journal of Bio-Environment Control
• /
• v.24 no.2
• /
• pp.57-62
• /
• 2015

Manual grafting is a labor-intensive operation and highly susceptible to human error. Development of grafting robot has been considered as an effective alternative to manual grafting. The study was conducted to investigate the grafting efficiency between the domestically produced automated grafting robot and traditional manual grafting performed in a commercial plug seedling greenhouse. Plug seedlings of pepper (Capsicum annuum L.) 'Buchon' and 'Anseongmatchum' were sown as scions and rootstocks, respectively on March 29, 2013. The grafting was performed by a grafting robot, amateur grafters, and professional grafters on May 31, 2013. After grafting, the seedling efficiencies and seedling characteristics were compared in terms of plant height, the number of success as well as failure of seedling grafts produced in an hour. The results showed that plant heights were most uniform in the grafts performed by the professionals that had a 0.6 cm difference whereas an uneven difference of 2.1 cm difference was observed in plug seedling grafted by an amateur. However, plug seedlings grafted by the grafting robot were found to be uniform with 1 cm plant height difference. Moreover, the maximum number of grafting processed plug seedlings per hour (667 plants) was achieved by the grafting robot on compared with the seedlings grafted (466 plants) by the professionals. Furthermore, the least failure rate of 21.7% was noted upon the usage of grafting robot than the manual grafters. Thus, the results demonstrate that the technology of automated grafting robots is the most appealing and can be employed in commercial plug seedling greenhouses to overcome the drawbacks of manual grafting.

• Journal of Bio-Environment Control
• /
• v.29 no.2
• /
• pp.105-109
• /
• 2020

This study was conducted to the improvement of solar light-based artificial light supply system and effect of lettuce cultivation. The artificial light supply system was consisted of units such as light source, power, system measurement and controller. The light source supply was composed of a solar transmitter and an LED lamp. The power supply consisted of an leakage breaker, SMPS, LED controller and relay. The solar transmitter was made of a quartz optical fiber with optimal light transmission. Artificial light used white lamp among LEDs. System measurement and control consisted of touch screen, Zigbee communication module and light quantity sensor. The results of test confirmed that the LED light is automatically activated when the intensity measured by the light intensity sensor is 200 μmolm^-2s^-1 or less. Moreover, the leaf length, root length, chlorophyll content and root fresh weight of optical fiber treatment was hight than LED lamp treatment. Therefore, it can be inferred that the energy-saving solar light collector device can be effective in the indoor lettuce production. However, the use of LED lamp is also recommended to assure the availability of sufficient sunlight in cloudy and rainy days.

• Journal of Korea Water Resources Association
• /
• v.41 no.3
• /
• pp.293-303
• /
• 2008

Reservoir turbidity flows degrade the efficiency and sustainability of water supply system in many countries located in monsoon climate region. A decision support system called RTMMS aimed to assist reservoir operations was developed for the real time monitoring, modeling, and management of turbidity flows induced by flood runoffs in Daecheong reservoir. RTMMS consists of a real time data acquisition module that collects and stores field monitoring data, a data assimilation module that assists pre-processing of model input data, a two dimensional numerical model for the simulation of reservoir hydrodynamics and turbidity, and a post-processor that aids the analysis of simulation results and alternative management scenarios. RTMMS was calibrated using field data obtained during the flood season of 2004, and applied to real-time simulations of flood events occurred on July of 2006 for assessing its predictive capability. The system showed fairly satisfactory performance in reproducing the density flow regimes and fate of turbidity plumes in the reservoir with efficient computation time that is a vital requirement for a real time application. The configurations of RTMMS suggested in this study can be adopted in many reservoirs that have similar turbidity issues for better management of water supply utilities and downstream aquatic ecosystem.