• Journal of the Korea Convergence Society
• /
• v.9 no.11
• /
• pp.45-51
• /
• 2018

Autonomous ship has been sportlighted as a core technology for the maritime industry in Industry 4.0 era. Autonomous ship is expeected to improve the safety, reliability, efficiency and environment significantly. For the realization of the autonomous ship, the remote control of the ship is one of the core functionality in addition to the autonomous ship control functionality in a ship. In this paper, we address a autonomous ship control system based on remote control. This paper proposes a remote control autonomous system and standardized ship-to-shore remote control protocol with for open platform. Finally, we implemented the system and tested with a real experiments with the test ship in order to demonstrate the feasibility of the proposed remote control autonomous system.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2011.06a
• /
• pp.1-3
• /
• 2011

선박관제시스템(VMS)는 최근 선박에서 도입되어 설치된 선박자동식별장치(AIS)에 의해 많은 정보를 획득하여 처리하고 있으나 AIS가 미설치된 소형선박, 어선 및 기타선박들에 대해 지속적으로 설치를 확대하고 있다. 특히 항계 내의 선박들의 주 통신시스템인 VHF 무선전화기는 항내에 입출항 중인 모든 선박들이 사용하기 때문에 통화 교신량의 폭주로 원활한 통신이 힘들어지고 또한 선박자동식별장치의 데이터 통신채널 또한 VHF이므로 class A 선박들도 동적 데이터의 누락현상이 발생하고 class B 선박들도 지역적으로 데이터 폭주현상이 발생하는 것으로 평가되고 있는 실정이다. 따라서 연안에서 운항하고 있는 모든 선박들을 모니터링하기 위해 소형선 및 심지어 어선들까지 선박자동식별장치의 설치를 유도하고 있는 실정이므로 통신채널의 폭주현상에 따른 데이터 누락현상은 더욱 심해질 것이다. 따라서 본 연구는 주파수공용방식(TRS: Trunk Radio System)의 통신시스템을 이용한 선박위치 자동발신장치에 적용방안을 제안하고 그 활용성을 입증하고자 한다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2001.05a
• /
• pp.737-740
• /
• 2001

We develope the PC based SPS to improve safety at sea, save fuel and time during a voyage and makes mariner's work more efficient and comfortable in ship navigation, who propose the auto-navigation system with SPS as basic main system. Developed SPS operate the function to monitor navigational equipment and to substitute a broken main navigational equipment such as CIS, ECDIS, or Radar/ARPA, automatically. These can be improve more efficient and comfortable ship navigation and reduce these traffic accident. The SPS has the function as DB and network server, additionally.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.20 no.8
• /
• pp.2449-2457
• /
• 1996

This paper presents a design method for autopilot control system in course change to the specified direction based on a robust digital servo controlmelthod incorporating the concept of the annihilator polynormial. The mathematicalmodel of ship turning motion is very complex in the view of practical control because it has time varying parameters, nonlinear and dead time terms. To apply the digital servo control method based on computer control, the model is linearized at an equilibrium point and discretized with appropriate sampling time. The control algorithm was evaluated on the basis of computer simulation for a model ship and the practical experiment was carried out with an image processing method for measurement of ship position in a water tank. The results of overall experiments show that the proposed control method will be one of good way to keep a track plotted in the map.

• Journal of Navigation and Port Research
• /
• v.45 no.1
• /
• pp.9-15
• /
• 2021

According to IMO, MASS is defined as a vessel operated at various levels independent of human interference. The safety navigation support service for MASS is designed to improve the safety and efficiency of MASS by developing public services on shore for ship arrivals/departures and for cargo handling. The safety navigation support service consists of a total of six types of services: autonomous operation, berthing/unberthing/mooring, cargo handling and ship arrival/departure service, PSC inspection, condition monitoring, and accident response support services. In order to support accident response service, the relative importance of a bridge navigational equipment was assessed by stratifying the navigation system to provide safe and efficient support services by objective judgment through specific and quantitative methods using AHP, one of decision-making methods used by an expert group. The survey was conducted by dividing the bridge navigational equipment into depth, location, and speed information. As a result of applying the AHP method, the importance of depth, location, and speed information was assessed. The relative importance of each equipment for providing location information was also assessed in order of Radar, DGPS, ECDIS, Gyro compass, Autopilot, and AIS. This was similar to survey results on the utilization of each operator's preference and its impact on marine accidents.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38C no.12
• /
• pp.1196-1206
• /
• 2013

In this paper, based on the information about navigation system of UAV with PTZ camera and 3D topography, algorithm able to show us in real-time UAV's geographical shooting location and automatically calculate superficial measure of the shooting area is proposed. And the method that can automatically estimate whether UAV is allowed to shoot a specific area is shown. In case of an UAV's shooting attempt at the specific area, obtainability of valid image depends on not only UAV's location but also information of 3D topography. As a result of the study, Ground Control Center will have real-time information about whether UAV can shoot the needed topography. Therefore, accurate remote flight control will be possible in real-time. Furthermore, the algorithm and the method of estimating shooting probability can be applied to pre-flight simulation and set of flight route.

• Aerospace Engineering and Technology
• /
• v.3 no.1
• /
• pp.242-250
• /
• 2004

This paper describes the detection method of wire-like obstacles using millimeter-wave radar system. Passive sensor like CCD camera can be used for the detection of high power electric cables on the hills or mountains and it can give very good quality of obstacle target information. But this system is very limited to use by bad weather condition. The detection capability for different diameters of wire targets using millimeter radar system have been accomplished. To simulate the target on the moving helicopter, rotating targets are used with fixed radar system. In the experiment 11mm, 16mm and 22mm diameter of wires have been detected in single, two and three wires in one position. The detected signal from single wire was very clear on gray level image. Three wires placed very closely together could be recognized in range, cross range image plane. For two and three wires, blur effect due to mutual scattering effect is observed.

• Proceedings of KOSOMES biannual meeting
• /
• 2005.05a
• /
• pp.135-140
• /
• 2005

Currently, ECDIS and GPS plotters are much used as equipment providing operators with route information, but they do not have any function of automatic route creation and route explanation, so available for only experienced operators. Especially, the present situation is tint no study is made of the automatic route creation and route explanation using ENC for ECDIS, substitution system of paper chart. ENC is the electronic navigation chart that is produced using S-52, S-57 standard format required by IHQ. In this paper, an Vessel Operator Support System(VOSS) is proposed to generate an optimal route where ENC and GPS data is fusioned induding the wind direction and speed of an anemometer and tide data. The proposed system was testified by a simulation, and its effectiveness was verified.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.23 no.6
• /
• pp.754-758
• /
• 2017

In this paper, we designed and manufactured an automatic control system to minimize or avoid damage by automatically controlling ship engines in case of fog to allow for safer operation. This automatic power control system uses ATmega128 and an RPM detection circuit to measure RPM changes by artificially generating fog in the fog generator. For this purpose, we have created a complete schematic and applied our source code to an ATmega128 for PWM control using a Hall sensor motor. In future, an experiment and safety evaluation using this automatic power control system with an actual ship will be prepared.

• Journal of Navigation and Port Research
• /
• v.37 no.6
• /
• pp.581-586
• /
• 2013

The sea traffic volume in Southwest sea including Wando area have increased every year. However the improvement of the facilities for convenience and safety in port and sea was not enough to meet the increasing demand of traffic and passengers' need. This study dealt with the situations and status of passenger ship traffic system in Wando area. In addition to, questionnaire survey of passenger ship user in Wando area was carried out in order to research the improvement of marine traffic system. On the basis of the result, navigation risks in the area was analysed. The institutional system such as passenger ship fare, enhanced traffic system that can improve marine traffic environment in the area were suggested and examined. The urgent issue was the scattered fishing ground near fairway which makes narrow passage and can cause risky passeger ship's navigation. In the side of passeger ship's operation, the wage of cargo handling was relatively expensive that needed to be improved.