• Proceedings of the KIEE Conference
• /
• 1997.07a
• /
• pp.215-217
• /
• 1997

본 논문에서는 유한요소 해석을 통한 리액턴스 보정 방법을 제안한다. 동기 리액턴스는 대상 전동기의 유한요소 해석을 통하여 자계 분포를 계산하여 구할 수 있고 엔드 누설 리액턴스는 3차원 유한요소 해석의 결과로부터 계산하여 보정한다. 제안된 보정 과정을 추가한 자기 등가회로법으로 교류 서보 전동기를 해석한 결과와 실험치를 비교하여 본 논문의 해석 방법의 타당성을 확인한다. 이러한 연구를 통해서 교류 서보 전동기 뿐 아니라 일반 전동기를 해석함에 있어서 리액턴스를 보다 정확히 고려할 수 있고 고정밀의 전동기를 설계하는 데에도 유용하게 사용될 수 있을 것이다.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.1065-1066
• /
• 2007

본 논문은 LCD 생산라인의 물류 자동화 시스템 중 OHS와 같은 선형 이송시스템에 적용이 가능한 영구자석 여자 횡자속 선형 전동기 개발에 관한 내용이다. 3차원 등가 자기 회로망법을 이용한 해석과 정특성 실험을 통해 전동기의 특성을 분석하여, 직선-곡선부에서 이송 가능한 횡자속 선형전동기 추진모듈의 사양을 결정하고 시작품을 설계, 제작하여 OHS 시스템 등의 이송시스템에 적용 가능한지 그 타당성을 검토하였다.

• Proceedings of the KIPE Conference
• /
• 2014.07a
• /
• pp.530-531
• /
• 2014

본 논문에서는 자기유도결합 무선전력전송 (IPT) 시스템의 Bifurcation 현상에 대한 분석을 통해, 1, 2차 보상회로 별 Bifurcation 현상 발생 임계점을 도출한다. 도출된 임계점에 해당하는 파라미터를 근거로 400W급 SP 보상회로 IPT 시스템에 대한 PSIM 시뮬레이션을 통하여 분석의 타당성을 검증한다.

• Proceedings of the KIEE Conference
• /
• 2005.07b
• /
• pp.1165-1167
• /
• 2005

본 논문은 냉각기 등에 적용 가능한 소형 압축기용 영구자석 여자 횡자속 선형 전동기 개발에 관한 내용이다. 3차원 등가 자기 회로망법을 이용하여 전동기의 특성을 해석하고 상용화 되어 사용되고 있는 선형 압축기의 특성과 서로 비교하여 그 성능을 평가 하였다.

• Proceedings of the KIEE Conference
• /
• 2001.10a
• /
• pp.125-127
• /
• 2001

Switched reluctance motor (SRM) has some advantages such as low cost, high torque density etc. However SRM has inevitably high torque ripple due to the double salient structure. To apply SRM to industrial field, we have to minimize torque ripple, which is the weak-Point of SRM. This paper presents optimal design process of SRM using numerical method such as 2D finite element method (FEM) and 3D equivalent magnetic circuit network method (EMCNM). The electrical and geometrical design parameters have been adopted as 2D design variables. The overhang structure of rotor has been also adopted as 3D design variable. From this work, we can obtain the optimal design, which minimize the torque ripple and maximize energy conversion loop.

• Proceedings of the KIEE Conference
• /
• 2005.07b
• /
• pp.921-923
• /
• 2005

본 논문은 LCD 제조 공정라인에서 LCD 원판을 이송하기 위한 영구자석 여자 횡자속형 선형 진동기 개발에 관한 내용이다. 3차원 등가 자기 회로망법과 2차원 유한 요소법을 사용하여 이동자의 단부 효과를 고려하여 전동기 특성을 해석하였으며 정특성 실험을 통하여 설계 및 해석의 타당성을 검증하였다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.2
• /
• pp.397-407
• /
• 2015

In this paper, we designed 1 chip IC for 3-axis gyroscope and 3-axis accelerometer used for various IoT/M2M mobile devices such as smartphone, wearable device and etc. We especially focused on analysis of gyroscope noise and proposed new architecture for removing various noise generated by gyroscope MEMS and IC. Gyroscope, accelerometer and geo-magnetic sensors are usually used to detect user motion or to estimate moving distance, direction and relative position. It is very important element to designing a low noise IC because very small amount of noise may be accumulated and affect the estimated position or direction. We made a mathematical model of a gyroscope sensor, analyzed the frequency characteristics of MEMS and circuit, designed a low noise, compact and low power 1 chip 6-axis inertial sensor IC including 3-axis gyroscope and 3-axis accelerometer. As a result, designed IC has 0.01dps/${\sqrt{Hz}}$ of gyroscope sensor noise density.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.36D no.3
• /
• pp.1-11
• /
• 1999

It is now common practice to utilize the quadrature RF coils to improve the signal-to-noise ratio (SNR) in the Magnetic Resonance Imaging (MRI) System. In addition, to make such an available SNR improvement, it is mandatory to use a well-designed quadrature coupler, which facilitates a perfect 3-dB coupling and quadrature-phase shift. However, the four ports matching condition has to be well considered during the RF excitation and the signal detection period. This work investigates the effects of such a mismatching condition (especially, due to patient) from the analysis, simulation, and real implementation and firstly proposes dynamic loading technique for a quadrature coupler and transmitting/receiving switch module to minimize a patient mismatching and enhance a system reliability. Also, we designed and implemented the quadrature coupler and transmitting/receiving switch module using microstrip. As a result, the SNR of our MRI system using the microstrip quadrature coupler and transmitting/receiving switch module with dynamic load increases 3 dB compared with the old one using USA quadrature switch. Also, the power capability of quadrature coupler and transmitting/receiving switch module is 5-kw peak power. Considering power loss and reduction of size, we used a RT/duroid 6010 substrate with high permittivity and for simulation we use Compact Software.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.24 no.3
• /
• pp.352-355
• /
• 2013

In this paper, a high power tuneable resonator for a wireless power transfer system based on magnetic resonance is proposed. A spiral structure is used for a self-resonant coil and tuneable trimmer capacitors are added at the edges of resonant coils such that the frequency can be easily tuned. 3D simulation tools and equivalent circuit modeling method are used for predicting self-resonant frequency and scattering parameters according to the change of capacitor values. From the measurement of the prototype WPT system, the resonant frequency could be controlled from 3.0 MHz to 4.5 MHz and the transmission efficiency way over 50 % when the distance between transmitting coil and receiving coil was 160 mm.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.43 no.12 s.354
• /
• pp.75-82
• /
• 2006

In this paper, we design the meander line inductors with high sensitivity and high quality factor(Q) using high characteristic impedance of aperture ground plate. Sensitivity as a frequency is new defined by variation of effective inductance per analysis frequency range instead of self resonance frequency (SRF). An equivalent lumped circuit is derived to explain the characteristic of high frequency inductor. The 4 nH meander line inductor with aperture ground plate has 0.45 nH/GHz of good sensitivity and 86 of Q at 0.7 GHz.