• Journal of the Korean Institute of Telematics and Electronics T
• /
• v.36T no.2
• /
• pp.1-7
• /
• 1999

The polymide thin films were fabricated by vapor deposition polymerized method of dry processes and studied the electric breakdown characteristics by self healing method. Polyamic-acid(PAA) thin films prepared by vapor deposition-polymerization (VDP) from PMDA(Pyromellitic dianhydride) and DDE(4,4'-diaminodiphenyl ether) were changed to PI thin films by thermal curing. In the same sample, electric breakdown fields increase with increasing test number, and then saturated over test number of the 25th. When the curing temperatures were 200$^{\circ}C$, 250$^{\circ}C$, 300$^{\circ}C$ and 350$^{\circ}C$, the electric breakdown strengths of PI were 1.21MV/cm, 3.94MV/cm, 4.61MV/cm and 4.55MV/cm at the test number of 40th.

• Journal of the Korean Ceramic Society
• /
• v.40 no.1
• /
• pp.62-68
• /
• 2003

Ba-ferrite particles added with Co and Ti, which were known well the additives for the control in coercivity, were synthesized by sol-gel method. In the range 90 to 120 minute reaction time, a stable sol solution which showed no change with temperature, pH, viscosity and aging time. After dried and heat treatment of sol solution, Ba-ferrite phase formed at $700^{\circ}C$ with Differential Thermal Analysis(DTA) and X-Ray Diffractometer(XRD) measurement. The crystallinity became to be better with increasing the temperature. It were showed by Scanning Electron Microscopy(SEM) that Ba-ferrite increased to particle sizes as increasing heating temperature and obtained of narrow particles size distribution. Also, magnetic characteristics of Ba-ferrite powders Co and Ti added were observed by a Vibrating Sample Magnetometer(VSM). Saturation magnetization$(M_s)$ was not much changed, however. the coercivity$(H_c)$dramatically dropped with addition of Co and Ti.

• Journal of the Korean Magnetics Society
• /
• v.7 no.4
• /
• pp.196-204
• /
• 1997

In order to study the effect of substituted $Al^{3+}$ of goethite, which was collected from Shinpyeongli in Cheju Island, we used X-ray diffractometer and Mossbauer spectrometer. In X-ray diffraction analysis, the X-ray diffraction peaks of goethite are not detected due to the high substituted Al contents of goethite. Isomer shifts indicated that the valence of Fe ions is almost oxidized trivalent of high spin state. It is believed that the contents of substituted diamagnetic $Al^{3+}$ for $Fe^{3+}$ is about 15.5 mol%. It seems that Neel temperature and saturated magnetic hyperfine field of the clay goethite are about 250 K and 498 kOe, respectively. For the temperature lower than Neel temperature, quadrupole splittings of the clay goethite are greatly influenced by $Al^{3+}$ substitution. It is believed that the high decrease of Neel temperature and magnetic hyperfine field of the clay goethite results from the magnetic dilution produced by substituting the diamagnetic $Al^{3+}$/TEX> for $Fe^{3+}$.

• Journal of the Korean Magnetics Society
• /
• v.22 no.6
• /
• pp.210-215
• /
• 2012

The absorption performance of a metal-backed single layered electromagnetic wave absorber is optimized at matching conditions of thickness and frequency indicating the maximum returns loss of incidence electromagnetic wave in the contour map. These matching conditions are obtained by applying the electromagnetic impedance to the transmission line theory, which depend on the complex permeability and complex permittivity of absorber material. The magnetic materials with high permeability can enhance the matching thickness condition to the wide frequency range based on the decrease of permeability with frequency and it can be used as a wideband electromagnetic wave absorber material. Therefore, the magnetic materials with higher saturation magnetization and lower permittivity than NiZn ferrite can be applied to the wideband electromagnetic wave absorber in order to satisfy the newly enforcing the electromagnetic compatibility regulation in the future.

• Journal of Digital Convergence
• /
• v.11 no.11
• /
• pp.529-536
• /
• 2013

The purpose of this study is to know clinical usefulness for fat suppression of the body curved portion compared with TSE-CHESS and TSE-SPAIR technique. A total of 25 normal volunteers without cervical spine disease were studied on a 3.0 T MRI scanner. As a quantitative analysis, PSNRs and CNRs were evaluated by using two methods for fat suppression of the body curved portion. As a results, PSNRs and CNRs for fat suppression were significantly greater for the TSE-SPAIR technique compared to TSE-CHESS technique. In conclusion, this study showed that a TSE-SPAIR technique has improved PSNRs and CNRs for evaluating of fat suppression in the body curved portion. These conclusions in the future will be provided information in diagnosis of fat suppression for the body curved portion.

• Journal of the Korean Magnetics Society
• /
• v.15 no.1
• /
• pp.30-36
• /
• 2005

Recently, It has been reported that the spin sprayed ferite film shows better magnetic properties at high frequeny that the ferrite by co-firing over $800^{\circ}C$ . Besides, there is no limitation to select the substrate materials because it can be processed with relatively low temperature below $100^{\circ}C$. Therefore, we fabricated film inductor as a passive device for DC-DC converter by a use of spin sprayed embedded form was completed by via hole process of pad opening. Saturation magnetization of 0.61 T and real part of permeability of 110 were obtained in Ni-Zn ferrite. In addition, inductance of 1.52 ${\mu}H$, quality factor of 24.3 at 5 MHz were measured with spiral 16 turn inductor. The rated current of inductor was 863 mA.

• Journal of the Korean Magnetics Society
• /
• v.13 no.5
• /
• pp.211-215
• /
• 2003

We fabricated the synthetic ferrimagnetic layers (SyFL) of permalloy/X (X=Ru, V)/permalloy by varying the X thickness, and investigated the changes of coercivity (H$\sub$c/), spin flopping field (H$\sub$sf/), and saturation magnetization field (H$\sub$s/) with a superconducting quantum interference device (SQUID). We also observed the microstructure with a cross sectional transmission electron microscope (TEM). Permalloy SyFL had less than 10 Oe coercivity, and H$\sub$sf/ and H$\sub$s/ could be tuned by varying ruthenium and vanadium layer thickness. The comparatively small exchange coupling in permalloy-V SyFL was caused by the intermixing of permalloy and vanadium decreasing the effective exchange coupling thickness.

• Korean Journal of Optics and Photonics
• /
• v.14 no.2
• /
• pp.175-183
• /
• 2003

We obtain a solution of optical parametric amplification using self-phase modulation within the Kerr media in a nonlinear interferometer with two arms. We show that it is equivalent to the solution driven by four-wave mixing and that the solution of parametric amplification is suitable to generate a parametric gain. We obtain a derivative of power gain with respect to the propagation distance and show that gain-saturation can occur as the beam propagates along the nonlinear arms. We also show a bandwidth characteristic of the parametric amplification driven by nondegenerate four-wave mixing. Numerical examples are given to illustrate that the solution of the parametric amplification can be applied to design and analysis of all-optical devices such as all-optical amplifiers.

• Proceedings of the Korean Vacuum Society Conference
• /
• 1999.07a
• /
• pp.143-143
• /
• 1999

Co/Ti 다층 박막을 제조하기 위해 직류원 마그네트론 스퍼터링 시스템을 이용하여 (100)실리콘 단결정 기판위에 Co와 Ti층을 각각 2/2, 5/5, 10/10 nm 정도의 두께로 조절하여 세가지 조성의 Co/Ti 다층 박막을 제조하였다. 이러한 Co/Ti 다층 박막의 후속 열처리는 Ar 가스분위기 하에서 Tube furnace를 이용하여 20$0^{\circ}C$와 30$0^{\circ}C$, 40$0^{\circ}C$의 온도에서 진행하였다. 증착초기에서부터 후속 열처리 공정을 진행하는 동안, Co/Ti 다층 박막에서의 계면반응을 미세 구조 변화 및 전기, 자기적 특성변화와 연관지어 관찰하였다. Co/Ti 다층 박막의 결정 구조와 미세 구조 변화를 관찰하기 위해 각각 X-선 회절기와 투과 전자 현미경을 사용하였고, 다층 박막의 전기적, 자기적 특성 변화를 관찰하기 위해 각각 4점 탐침기, 진동 시료형 자속계를 이용하였다. Co/Ti 다층 박막을 20$0^{\circ}C$의 저온에서 열처리를 한 경우에는 증착 초기의 계면반응에 의해 형성된 비정질 층이 성장하였고, 30$0^{\circ}C$와 40$0^{\circ}C$의 고온에서 열처리를 하는 경우에는 비정질 측의 성장보다는 새로운 화합물 CoTi 결정상이 형성되면서 비정질상은 오히려 감소하였다. 즉, Co/Ti 다층 박막의 계면 반응은 결정질 Co와 Ti을 계면 반응물로 소모시키면서 비정질 층을 성장시키는 비정질화 반응이 활발히 일어났다. 특히, 소모된 계면 반응물로 소모시키면서 비정질 층을 성장시키는 비정질화 반응일 활발히 일어났다. 특히, 계면 반응물로 소모시키면서 비정질 층을 성장시키는 비정질화 반응일 활발히 일어났다. 특히, 소모된 계면 반응물 Co와 Ti 중에서 Ti의 소모속도가 더 빠르게 관찰되었다. 이로부터 Ti 이 증착초기에서 저온 열처리 과정동안 Co/Ti 다층 박막의 계면에서 일어나는 비정질화 반응의 주 확산자로 작용했다는 것을 알 수 있다. 한편, 30$0^{\circ}C$와 40$0^{\circ}C$의 고온에서 열처리한 Co/Ti 다층 박막의 계면 반응은, 비정질 반응에 의한 비정질층의 형성보다는 새로운 화합물 결정질 CoTi상을 형성시키는 결정화 반응이 우세했다. Co/Ti 다층 박막의 전기적 저항은, 열처리에 의한 비정질 층의 생성 및 성장으로 인해 증가하였고 새로운 저저항 CoTi 결정상의 형성으로 인해 감소하는 것을 알 수 있었다. 또한 Co/Ti 다층 박막의 포화 자화값은, 열처리에 의한 계면에서의 비정질화 반응과 CoTi 결정화 반응으로 인해 강자성체인 Co 결정상이 감소됨에 따라 감소하는 경향을 나타냈다.

• The Journal of Engineering Geology
• /
• v.32 no.4
• /
• pp.483-498
• /
• 2022

Soil moisture is defined as water in the pores of the soil's unsaturated zone, and it is closely related to various hydrological processes. This study aims to provide meaningful data by identifying factors affecting soil moisture through comparing soil moisture content and soil permeability in a study area covering six different land use types in an agricultural region that is highly dependent on groundwater. We conduct auto-correlation analysis, spectral density analysis, and cross-correlation analysis using time-series data. Soil moisture content shows to have weak auto-correlation and memory effects, and precipitation appears to have a substantial influence on soil moisture content. Saturation hydraulic conductivity does not vary markedly with changing land use, and instead appears to be affected by the inhomogenous soil structure.