• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.227.2-227.2
• /
• 2016

환형 전자 빔이 진행됨에 따라 표면파의 전단 유동에 의해 발생 및 진행되는 diocotron instability(다이오코트론 불안정성)를 안정시키기 위해, 나선형 자기장이 인가된 상황을 2차원 PIC 시뮬레이션을 통해 구현하고 그 효과에 대한 조사가 수행되었다. 나선형 자기장은 2차원 단면 상에서 회전하는 자기장으로 표현되었고, 이에 대해서 자기장이 회전하는 각도와 회전 주기, 회전 방향을 변수로 하여 그 효과를 나타내었다. 결과적으로, 자기장이 회전 하는 방향과 전자 빔이 회전하는 방향이 반대가 되었을 때, diocotron instability가 진정되는 효과를 얻었으며 이는 불안정성의 근원인 전단 유동을 완화시킴으로써 얻어진 결과임이 확인되었다. 이 때, 동반되는 밀도 분산 현상에 대해서도 고려가 되었고, 결론적으로 인가되는 나선형 자기장에 대하여 가장 적절한 조건에 대한 조사가 수행되었다.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.37 no.2
• /
• pp.153-160
• /
• 2013

An orthotropic magneto-rheological rubber composite (MRRC) based on a general-purpose rubber can be manufactured by using an electromagnetic device during the curing processes of rubber mixtures. The magnetic transmissivity of MRRCs increases with the iron particle (IP) content, and that of aligned MRRCs with a 2-T magnetic field is 1.8 to 2 times higher as compared to that of randomly dispersed MRRCs. The effect of a 2-T magnetic field on carbon nanotube (CNT) reinforced MRRC has been identified clearly, and the magnetic transmissivity is found to be 3.7%. The compressive stress of MRRC (IP 90 + CNT 5, 2 T alignment) under a magnetic field of 0.49 T is 2.1 times higher as compared to that of the matrix. The MR effect of MRRC increases with the IP content, and that of aligned MRRC with the IP 90 and 2 T magnetic field is 20.4%. It is confirmed that the magnetic field when making the specimen and when performing the compression test greatly impacts the compression characteristics.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.35 no.8
• /
• pp.899-904
• /
• 2011

This This study aims to verify burr formation and to remove the burrs in micro-channel fabrication using micro-machining tools. The machining processes are combined with micro-milling and magnetic abrasive deburring for AISI316 stainless steel. Depending on the micro-milling conditions that are applied, burrs are formed around the side walls. Magnetic abrasive deburring is used to remove these burrs. AISI316 stainless steel is a nonferrous material and its magnetic flux density, which is an important parameter for efficient magnetic abrasive deburring, is low. To enhance this magnetic flux density, we design and build a magnetic array table. The effect of removing burrs is evaluated via SEM and a surface tester.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.15 no.4
• /
• pp.129-134
• /
• 2005

A numerical analysis was performed on magnetic field effects of silicon melt motion in Czochralski crystal puller. The turbulent modeling was used to simulate the transport phenomena in 18' single crystal growing process. For small crucible angular velocity, the natural convection is dominant. As the crucible angular velocity is increased, the forced convection is increased and the distribution of temperature profiles is broadened. The cusp magnetic field reduces effectively the natural and forced convection near the crucible and the temperature profiles of the silicon fluids is similar in the case of conduction.

• Management & Information Systems Review
• /
• v.28 no.3
• /
• pp.161-189
• /
• 2009

The sub-prime crisis led to the collapse of US investment banks which were considered highly competitive during the Asian Financial Crisis. The event gave us a lesson on importance of the financial supervision. Additionally concerns rise over the fact that the role model of the Capital Market Law, created for the purpose of developing the capital market, is the US investment banks. This paper investigates if the prudential regulations, among them especially the capital regulation, are able to prevent the risk the arises from Korean financial firms operating investment bank business. The current capital requirement regulation, Net Capital Ratio(NCR), is not sufficient, because it's nature of being a ratio makes the NCR ineffective when assets and liabilities are concurrently rising. We also verified the internal model which measured the market risk, by comparing the US investment and Korean banks' diversification effect. The result of the test is that it is difficult to conclude the internal model has a critical defect. This paper's contribution is that it is not sufficient use only the capital regulation in supervising financial markets.

• Investigative Magnetic Resonance Imaging
• /
• v.5 no.2
• /
• pp.116-122
• /
• 2001

Purpose : To find sensitivity of MRI imaging methods to slow flow phantom study was performed with conventional Spin-Echo, gradient echo based Phase Contrast, fast GRASS, and heavily T2-weighted Fast Spin Echo pulse sequences. Materials and Methods : A siphon driven flow phantom was constructed with a ventriculo-peritoneal shunt catheter and a GE phantom to achieve continuous variable flow. Four different pulse sequences including Spin-Echo, Phase Contrast, GRASS and Heavily T2-weighted Fast Spin Echo were evaluated to depict slow flow in the range from 0.08 ml/min to 1.7 ml/min and to compare signal intensities between static fluid and flowing fluid. Results : In the slow flow above 0.17 ml/min conventional Spin-Echo showed superior apparent contrast between static and flowing fluid while GRASS was more sensitive to the very slow flow below 0.17 ml/mim. It was not accurate to calculate flow and velocity below 0.1 ml/min with a modified PC imaging. Conclusion : Four different MR pulse sequences demonstrated different sensitivity to the range of slow flow from 0.08 ml/min to 1.7 ml/min. This finding may be clinically useful to measure CSF shunt flow or detecting CSF collection and thrombosis.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.22 no.5
• /
• pp.119-126
• /
• 2018

Recently, the production of circulating fluidized bed combustion ash has been increased in thermal power plants. The addition of limestone for the desulfurizing effect of circulating fluidized bed boiler ash increases the content of CaO and $SO_3$ contained in ash, which is higher than the free fly ash in general fly ash. Unlike conventional fly ash, the circulating fluidized bed combustion ash has a high reactivity when it comes into contact with water due to its hydraulic properties and high free-CaO content. The aim of this study is to investigate the possibility of non-sintered binder by using self-cementing properties of circulating fluidized bed combustion ash. The mechanical and hydration characteristics were investigated according to the content of CFBC ash. In addition, the effects of gymsum type and content on the compressive strength and micro-structure of non-sintered binder pastes.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.49 no.9
• /
• pp.729-738
• /
• 2021

Feedback flow control using an artificial neural network was numerically investigated for NACA0015 Airfoil to suppress flow separation on an airfoil. In order to achieve goal of flow control which is aimed to reduce the size of separation on the airfoil, Blowing&Suction actuator was implemented near the separation point. In the system modeling step, the proper orthogonal decomposition was applied to the pressure field. Then, some POD modes that are necessary for flow control are extracted to analyze the unsteady characteristics. NARX neural network based on decomposed modes are trained to represent the flow dynamics and finally operated in the feedback control loop. Predicted control signal was numerically applied on CFD simulation so that control effect was analyzed through comparing the characteristic of aerodynamic force and spatial modes depending on the presence of the control. The feedback control showed effectiveness in pressure drag reduction up to 29%. Numerical results confirm that the effect is due to dramatic pressure recovery around the trailing edge of the airfoil.

• Land and Housing Review
• /
• v.4 no.1
• /
• pp.107-117
• /
• 2013

This study aimed to assess the rental housing ABS in Korea, and to suggest ways of improving the structure of existing rental housing ABS. Thus, the three major assessment for existing public rental housing ABS case can be summarized as follows : First, when viewed in terms of the accounting treatment, rental housing ABS which use the future receivables as underlying asset, can not enjoy off-balance-sheet effect. Second, when viewed from the point of financing costs, the rental housing ABS interest rate being higher than unsecure bond is very unreasonable nevertheless the ABS being off-balanced. Third, when viewed from the liquidity effect, the originator (LH) use the ABS as a means of diversifying funding in a serious liquidity crisis situation. The Improvement of rental housing ABS based on the evaluation results can be summarized into two broad. First, it is a plan to handle the off-balance-sheet effect in a way of changing the accounting treatment of rental payment. Second, it is a plan to reducing the structuring cost and interest rate in ways of multi-asset securitization structure, self-trust structure, and adopting legal CB structure.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.7 no.4
• /
• pp.536-547
• /
• 1997

For various angular velocities of crucible and crystal, the characteristics of melt flows, temperatures and concentrations of oxygen are numerically studied in the Czochralski furnace with a uniform axial magnetic field. Buoyancy effect due to the heating of crucible wall and thermocapillary effect due to the temperature gradient at the free surface, can be differentiably suppressed by the centrifugal forces due to the rotations of the crucible and crystal. The most important factor which yields the centrifugal forces is the rotation velocity of the crucible, that influences the fields of velocities, temperatures and concentrations. In the case that the crucible rotation velocity is not high, the rotations of the crystal gives rise to the centrifugal forces effectively.