• Proceedings of the KSR Conference
• /
• 2008.06a
• /
• pp.519-534
• /
• 2008

The Maglev travels at levitated status from the rail in some gab (about $8\sim10mm$). it make difference with the existing subway or the another LRV. The detection method of the train speed and the train position to be used at Maglev's signaling system differ with the existing subway or the another LRV's. so, the signal system construction of the new method is necessary. This paper describes the configuration and characteristic of the total signaling system (TTC/Wayside/Cab/Guide way system etc.) developed for Maglev, and the design concept of the signaling system based on the latest wireless LAN communication for driverless operation.

• Proceedings of the KSR Conference
• /
• 2006.05a
• /
• pp.47-59
• /
• 2006

This study is about a feasibility study for the practical using Urban Transit Maglev system based on systems engineering. First of all we defined what phase is matched with the project for feasibility study in the system life cycle and identified tasks that shall be done in the phase. Finally we suggested how to do in this project. The Urban Transit Maglev system is not wholly new system. It has similar architecture to a legacy urban railway system. But it is the system that is partially introduced new technology, because there are many projects have this characteristic within the country, we expect that this study may provide references.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.25 no.8
• /
• pp.1308-1316
• /
• 2001

A hybrid type master system is proposed to take the advantage of the link mechanism and magnetic levitation mechanism without using a force sensor. Two different types of electromagnetic actuators, moving coil type and moving magnet types are used to drive the master system which is capable of 4-DOF actuation. It is designed that the rotation motions about x-y axis are decoupled and the whole system is represented by simple dynamic equations. The force reflection is achieved by using the simple relation between the force and applied current and position. The simulation and experimental results are presented to show its performance.

• Proceedings of the KSR Conference
• /
• 2004.10a
• /
• pp.563-572
• /
• 2004

Maglev is the vehicle which can run in levitated condition by the electro-magnets, and propelled by linear induction motors. Maglev system represents a typical example of large-scale multi-disciplinary system, consisting of subsystems such as train, electrical, hardware, electronics, control, information, communication, civil technology etc., that must be the subject under configuration, control and requirement management. Not only the requirements dictate the contracts with the suppliers but also become the basis of the development process, project execution, system integration, and testing. These requirements provide the basis specification of all development activities.

• Proceedings of the KSR Conference
• /
• 2001.05a
• /
• pp.393-400
• /
• 2001

State of the art and current issues related with the RC and PSC structure system for the German magnetic levitation train were investigated. The German magnetic levitation train adopted a new kind of a structure to enable high-speed transportation, which allows the use of the space over a ground. The loading from Transrapid is light-weight compared with a regular train due to load distribution to a supporting structure. Therefore, Transrapid is considered an economical and efficient transportation system, and is also an environmentaly-sustainable structure, In this paper, the structural design and construction technology specific to a magnetic levitation train were discussed, and structural considerations related with an actual operation of the train were pointed out. In addition, the future research area of a magnetic levitation train was proposed.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.64 no.4
• /
• pp.578-585
• /
• 2015

Electromagnetic levitation system(EMLS) is one of the well known nonlinear systems. Often, it is not easy to control an EMLS due to its high nonlinearity. In this paper, we first apply two linearization method(jacobian and input-output feedback linearization) to design two feedback controllers for an EMLS. Then, by observing the advantages of each controller, we design a switching control algorithm which engage two controllers depending on the position of the steel ball in order to achieve the improved performance over each controller. The validity of our switching control approach is verified via both simulation and actual experimental results.

• Proceedings of the KIEE Conference
• /
• 2000.07b
• /
• pp.1408-1410
• /
• 2000

The regulation performances needs high control gain in novel output feedback controller but high control gain is decreased relative stability of the total system. Thus, this paper proposed neural network controller(NNC) for output feedback controller. In this scheme, output feedback controller are guarantee global stability and NNC are controller steady-state error and defined optimal control law. And we demonstrated this scheme by simulations.

• Proceedings of the KIEE Conference
• /
• 2000.07b
• /
• pp.1411-1413
• /
• 2000

Distubance of air-gap sensors by rail irregularities are the serious problem deteriorating the performance in the electromagnetic suspension (EMS) systems. Thus, this paper proposes the output feedback controller with discrete kalman filter for the EMS systems. The discrete kalman filter estimate true state value and output feedback controller guarantee stability. The benefit of this scheme are shown by simulation. Therefore air-gap disturbance are rejected successfully.

• Proceedings of the KIEE Conference
• /
• 2001.07d
• /
• pp.2120-2122
• /
• 2001

This paper describes a PID controller for an attraction type magnetic levitation system considering $H^{\infty}$ performance. PID controllers are a kind of fixed structure reduced order controllers. Using change of variables a reduced order control problem can be recast into a static output feedback control problem and can be solved efficiently by LMI(Linear Matrix Inequality) method. In this paper, cone complementarity method is adopted and the simulation shows good results.

• Proceedings of the KIEE Conference
• /
• 2003.07b
• /
• pp.864-866
• /
• 2003

In this paper, the improvement of control performance for a magnetic levitation system is presented. The model of a single-magnet system with rail is derived. As a conventional controller, PID controller is designed and implemented. This controller has a narrow stability margin due to low-order controller structure so that it cause unstability for a flexible rail. So to improve the control performance and stability margin, a robust controller as a new controller is designed and implemented using a VME-based digital controller. As a result, the controller performance of the new designed controller is better than that of the conventional controller.