• Environmental engineer
• /
• s.184
• /
• pp.64-69
• /
• 2001

1998년 기준으로 하수처리장에서 발생하는 슬러지는 약 144만톤/년으로 발생량 대부분을 단순매립과 해양투기로 처리하고 있어서, 각종 규제가 강화됨에 따라 처리방안에 대한 대안 마련이 시급한 실정이다. 특히 단순매립 시에는 슬러지 대부분이 유기물로 부패되어 매립지 내에서 악취, 침출수, 해충 등의 2차 환경오염을 야기시키고 있다. 따라서 본 연구개발의 목표는 자가발열 고온호기성 소화(Autothermal Thermophilic Aerobic Digest

• Korean Journal of Food Science and Technology
• /
• v.29 no.1
• /
• pp.65-71
• /
• 1997

The energy supplied by motor of extruder, being known mostly to be dissipated as heat, was classified into two kinds of energy: a thermal energy by heat dissipation and a purely mechanical energy. The thermal energy was defined as a energy in terms of temperature rise and the mechanical energy as the motor energy minus the heat dissipated energy. A method to derive the thermal energy and the relative mechanical energy (the mechanical energy calculated regarding the mechanical energy at the lowest screw speed as zero) under the condition of constant barrel temperature was developed by which an extrusion case was analyzed. When extruding com grits with moisture $(27{\sim}37%)$ at low barrel temperature $({\leq}80^{\circ}C)$, the thermal energy slightly increased with increase in the moisture content, whereas the relative mechanical energy increased to a great extent. When increasing the screw speed, the thermal energy was nearly kept constant, whereas the relative mechanical energy largely varied. It is concluded that as the moisture content increases, the role of the mechanical energy becomes more effective than the heat energy dissipated from the motor energy.

• Korean Journal of Food Science and Technology
• /
• v.29 no.1
• /
• pp.72-76
• /
• 1997

The effect of the energy supplied in extrusion on the starch gelatinization was analyzed. The energy needed for extrusion is generated by motor and heater. The motor energy is transformed into a thermal energy by heat dissipation and a mechanical energy, and the heater energy is of a thermal energy. At the low barrel temperature $({\leq}80^{\circ}C)$, it was found out there are two kinds of thermal energy by heat dissipation: one by a powder friction of corn grit with low moisture contents and the other by a viscous dissipation of corn grit with high moisture contents. The dissipated thermal energy by the powder friction was more effective on the starch gelatinization than that by the viscous dissipation. The effect of the mechanical energy was also analyzed in terms of a relative mechanical energy. The gelatinization of corn grit with high moisture contents $({\geq}33%)$ largely depended on the change in the relative mechanical energy, whereas that with low moisture contents $({\leq}30%)$ hardly depended on it.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.10 no.2
• /
• pp.176-183
• /
• 2022

High-purity waste CNTs were mixed into cement mortar to manufacture heat-generating concrete that can use low voltage power, and carbon fiber and waste cathode materials were also used improve the conductivity of the mortar. The waste CNTs were analyzed to have a high concentration of multi-walled CNTs, and substituted liquid type waste CNTs were used during mortar mixing in order to increase dispersibility. The temperature change of the mortar with CNT was evaluated when using electric power below DC 24 V in order to utilize a small self-generation facility such as small solar power module when the mortar heats up and to minimize electromagnetic waves. When liquid-type waste CNTs were applied and a voltage of DC 24 V was introduced, it rose to 60 ℃ in a 200 × 100 × 50 mm mortar block specimen. The field applicability of self heating mortar with waste CNT was sufficient and also the amount of change in heat energy in mortar with liquid type waste CNT, carbon fiber and waste cathode materials is more effective compared to it of other variables.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2012.03a
• /
• pp.98-98
• /
• 2012

최근 국내외에서 첨단 기능성 섬유에 대한 소비자들의 관심이 높아지면서 다양한 분야에서 기능성 소재들이 개발되고 있다. 특히 기능성 스포츠웨어 시장에서는 계절의 경계를 넘어 야외 활동 중에 사용할 수 있는 제품에 대한 요구가 증가되고 있는데, 날씨가 매우 덥고 햇살이 뜨거운 것에서부터, 얼음처럼 차갑고 추운 것까지 가지각색 인 경우가 있을 수 있다. 이러한 변화무쌍한 날씨에 쾌적한 활동을 하기 위해서는 외부 온도변화에 대응하여 몸을 보호하고 자연환경에 맞설 수 있는 의복의 필요성이 부각되고 있다. 본 연구에서 개발하고자 하는 지능형 체온조절 섬유는 정적상태에서는 보온성과 적외선을 방출을 통한 자가 발열기능을 부여하고, 동적상태에서는 태양열 증폭기능과 운동량에 따른 흡습발열의 기능을 통하여 자연환경과 의복환경의 변화에 대응할 수 있는 스포츠웨어 제품이다. 따라서 보온성이 우수한 PP, acrylate 원사 등을 이용하여 복합 방적사 설계 및 생산을 최적화였다. 또한 흡습발열 성능이 향상된 섬유구조체를 설계하여 개발 원사 구성에 따라 보온 발열 기능성 부여 방법을 달리하여 최적의 성능을 이끌어내는 제품을 개발하고자 하였다.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.10 no.1
• /
• pp.66-73
• /
• 2022

The purpose of this study was to develop self-heating concrete by utilizing the conduction resistance of concrete in order to reduce the risk of occurrence of black ice in the concrete pavement in winter and to prevent damage caused by freez-thawing effect. For this purpose, it was attempted to evaluate the strength and temperature exothermic characteristics using powder and liquid waste CNTs and a waste cathode agent as a conduction promotion. It was analyzed that liquid waste CNT had an effective dispersion degree in the mortar and a small decrease in strength occurred. In addition, DC 24 V was supplied by applying steel mesh, copper foil and copper wire to the mortar as electrodes, and the temperature change characteristics according to the mixing ratio of spent CNTs, anodes and carbon fibers were evaluated. In addition, by evaluating the temperature characteristics according to the electrode spacing from the selected optimal mixture, it was confirmed that it had sufficient heating characteristics up to an electrode spacing of 100 mm up to AC 50 V.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.21 no.6
• /
• pp.162-168
• /
• 2017

Carbon nanotube(CNT) is one of the promising construction materials to produce concrete with high strength and durability by adding in the concrete mixtures from various researches. Also, its superior heat conductivity can be one of the options to develop self-heating concrete. In this research, the fundamental study was conducted to investigate mechanical properties and microstructures of cement pastes and mortars by strength tests and porosity measurement with several CNT additions, which were 0 wt%, 0.115 wt%, 0.23 wt% and 0.46 wt% of CNT-cement ratio. Compressive and flexural strength test were conducted at 3, 7 and 28 days, and pore characteristics were investigated by mercury intrusion porosimetry. SEM-EDS and Thermogravimetric analysis(TGA) were conducted to prove the hydration product types and CNT dispersion in the cement matrix. As a result, even though high amount of CNT additions were caused worse performance, mixtures with 0.115 wt% of CNTs developed the similar performance with plain mixture.

• The Korean Journal of Blood Transfusion
• /
• v.29 no.3
• /
• pp.320-327
• /
• 2018

A 72-year-old man with general weakness visited the outpatient clinic of the hematology department. The patient had been treated under the diagnosis of autoimmune hemolytic anemia for 2 years. His hemoglobin level at the time of the visit was 6.3 g/dL, and a blood transfusion was requested to treat his anemia. The patient's blood type was A, RhD positive. Antibody screening and identification test showed agglutination in all reagent cells with a positive reaction to autologous red blood cells (RBCs). He had a prior transfusion history with three least incompatible RBCs. The patient returned home after receiving one unit of leukoreduced filtered RBC, which was the least incompatible blood in the crossmatching test. After approximately five hours, however, fever, chills, dyspnea, abdominal pain, and hematuria appeared and the patient returned to the emergency room next day after the transfusion. The $anti-Fy^a$ antibody, which was masked by the autoantibody, was identified after autoadsorption using polyethylene glycol. He was diagnosed with an acute hemolytic transfusion reaction due to $anti-Fy^a$ that had not been detected before the transfusion. In this setting, it is necessary to consider the identification of coexisting alloantibodies in patients with autoantibodies and to become more familiar with the method of autoantibody adsorption.

• Journal of Chest Surgery
• /
• v.30 no.8
• /
• pp.823-826
• /
• 1997

Myocardial abscess usually occurs as a complication of infective endocarditis or overwhelming septicemia. Coronary artery occlusion caused by myocardial abscess has been rarely reported. A 61-year-old man presented with fever and chill that developed 6 weeks prior to admission. He had a history of cardiopulmonary resuscitation for ventricular fibrillation and cardiac arrest 4 weeks prior to admission. Echocardiography showed a 3xfcm sized mass in the area of the right atrioventricular groove and coronary angiography showed complete occlusion of the proximal right coronary artery. Under the diagnosis of myocardial infarction complicating myocardial abscess, debridement of abscess and coronary artery bypass grafting with right internal mammary artery to distal right coronary artery was performed. Culture from the abscess cavity demonstrated Salmonella arizona.

• Journal of Advanced Marine Engineering and Technology
• /
• v.38 no.1
• /
• pp.48-55
• /
• 2014

These Xenon flashlamp power supply for Ultra Violet has converter with high voltage conversion ratio. General model is composed of transformer with high voltage conversion ratio and voltage doubler rectifier circuit. Purpose of power supply leads dielectric breakdown of Xenon flashlamp and passes current rapidly. When passing current, it has to limit current to avoid over-heat, damage of electrode and acceleration of gas oxidation which are cause of performance degradation of lamps. Generally, inductors and resistors, which are called as "Ballast," are used to limit currents. Generally, Transformer has high turn ratio to make high voltages. But we can get high voltages using the transformer with low turn ratio which is driven with self resonance. Also, an advantage of self resonance is to make a circuit simply through impedance of transformer in resonance frequency which filters output voltage. As using an unique impedance of transformer, the circuit does not need other impedance elements like the ballast. So the power supply assures high efficiency of the arc discharge.