• Tunnel and Underground Space
• /
• v.19 no.6
• /
• pp.517-525
• /
• 2009

Stereophotogrammetry is used to extract spatial information of an interested object by constructing a stereo-image from two or more photos. In this study, the stereophotogrammetry was adopted for a rock joint survey in mine tunnels. The orientations of discontinuities were measured from two mine tunnels with a clinocompass. To evaluate the effect of photographing light level on the stereophotogrammetry analysis, the light intensity was changed within a predefined range for every photograph. Those photographs were analyzed by using a commercial code for stereophotogrammetry - ShapeMetriX 3D, and the results from the analysis were compared with the manual measurement using a clinocompass.

• Tunnel and Underground Space
• /
• v.21 no.1
• /
• pp.82-92
• /
• 2011

Stereophotogrammetry is used to extract spatial information of an object by constructing a stereo-image from two or more photos. In this study, stereophotogrammetry was adopted for analyzing blast fragmentation of rock blocks in a quarry site. 2D image processing and stereophotogrammetry were applied to the fragmentation analysis of rock blocks horizontally scattered in a laboratory, and their results were compared with physical measurements using a water tank. Fragmentation of rock muckpiles was estimated in laboratory and field tests by using the stereophotogrammetry and statistical analysis.

• Explosives and Blasting
• /
• v.38 no.3
• /
• pp.1-14
• /
• 2020

Stereophotogrammetry can be used for accurate and fast investigation of over-break or under-break which may form during the blasting of underground space. When integrated with small unmanned aerial vehicles(UAVs) or drones, stereophotogrammetry can be performed much more efficiently. However, since previous research are mostly focused on surface environments, underground applications of drone-based stereophotogrammetry are limited and rare. In order to expand the use of drone-based stereophotogrammetry in underground environments, this study investigated a rock surface of a underground mine through drone-based stereophotogrammetry. The accuracy of the investigation was evaluated and analyzed, which proved the method to be accurate in underground environments. Also, recommendations were proposed for the image acquisition and matching conditions for accurate and efficient application of drone-based stereophotogrammetry in underground environments.

• Proceedings of the Korean Society for Rock Mechanics Conference
• /
• 2000.09a
• /
• pp.77-91
• /
• 2000

Rock joint survey consists of measurement of orientation and face mapping for trace informations. We have developed a new alternative approach called rock joint survey system by stereophotogrammetry and image processing to replace the conventional manual method. For the measurement of orientations and face mapping, we applied a stereophotogrammetry and developed two hybrid approaches using image processing techniques, respectively. These methods have advantages in making it possible to measure the orientations of joints and perform face mapping rapidly and objectively in unaccessible and dangerous areas.

• Tunnel and Underground Space
• /
• v.10 no.3
• /
• pp.329-343
• /
• 2000

Rock joint survey consists of measurement of orientation and face mapping for trace informations. We have developed a new alternative approach called rock joint survey system by stereophotogrammetry and image processing to replace the conventional manual method. For the measurement of orientations and face mapping, we applied a stereophotogrammetry and developed two hybrid approaches using image processing techniques, respectively. These methods have advantages in making it possible to measure the orientations of joints and perform face mapping rapidly and objectively in unaccessible and dangerous areas.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2015.05a
• /
• pp.306-306
• /
• 2015

기존 토사유출실험 연구는 대체로 유출구에서 유사의 총량을 일정한 시간 간격으로 측정했다. 이 같은 방식으로는 총 토사유출량의 시간적 변화는 알 수 있으나, 토사유출의 공간적 분포 변화는 알 수 없기 때문에 토사유출의 취약지점을 파악하고 이를 제시할 수 없다. 본 연구에서는 이러한 한계를 극복하고자 입체사진측량 기법을 도입하여 토사유출의 공간분포를 측정하고 각 지점이 총 토사유출량에 기여하는 정도를 파악하였다. 토조($2m{\times}1m{\times}0.3m$)로부터 약 1.5 m 높이에서 고해상도 디지털 카메라를 이용하여 토조 내 표면을 촬영하였고, 입체사진측량 기법을 이용해 토조 내 수치표고모형(Digital Elevation Models)을 추출하였다. 수치표고모형 추출 과정에서는 고도값의 오차 범위를 확인하였고 격자 해상도를 다양하게 설정하면서 최적의 격자 해상도를 평가해보았다. 최종적으로 구한 일련의 수치표고모형으로부터 토사유출의 시공간적 변화를 파악할 수 있었으며, 이는 토조 내 토사유출 과정에 대한 보다 세밀한 이해를 가져올 것으로 기대된다.

• Tunnel and Underground Space
• /
• v.26 no.5
• /
• pp.348-362
• /
• 2016

This study describes the results of blasting overbreak analysis using the stereo photogrammetry method in an underground mine. For comparing its quantitative measurements, LIDAR system was applied to the test site and blasting overbreak was analyzed for 4 test blasting operations. The difference in values obtained from the two methods showed only 0.81% in volume and 1.05% in area, respectively, therefore authors verify the field applicability of stereo photogrammetry method on underground mine. The volumes of overbreak measured from 4 test blastings were $29.84m^3$, $22.45m^3$, $14.54m^3$ and $5.46m^3$, respectively, in photogrammetry analysis on excavation surface, and it was shown that the volume of overbreak decreases with blasting sequence. From these measurements, it is concluded that the stereo photogrammetry method can describe the underground excavation surface effectively and the its quantitative data can be used for analysis of volume, area and overbreak of excavation zone.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.17 no.1
• /
• pp.11-19
• /
• 1999

Lately, with the development of the fields of computer and photogrammetry, Digital Photogrammetric Systems are widely used for the generation of GIS basemap, the acquisition of topographic information and DEM, the formation of digital orthophoto, three-dimensional viewing and so on. According as the demand for the systems is rapidly increasing, we suggest keenly the necessity of domestic technical development, because all of these systems depend on foreign technology until now. In this study, by using digital photogrammetry method, with Visual C++ language, we have developed Digital Photogrammetric Systems for Windows which is able to get three-dimensional coordinates through interior orientation, exterior orientation, epipolar line, image matching from a pair of aerial photos taken with metric camera. This system consists of not only a module which can revise digital map that is being made at National Geographic Institute as a part of data construction project of National Geographic Information System, but also a module which can view three-dimensional image on the screen monitor by using anaglyph for three-dimensional analysis. The digital photogrammetry modules developed in this study are expected to be used as primary modules for the effective management of the urban as well as main modules in developing professional digital photogrammetric systems.

• Proceedings of the Korean Society for Rock Mechanics Conference
• /
• 2007.03a
• /
• pp.259-273
• /
• 2007

• Explosives and Blasting
• /
• v.36 no.1
• /
• pp.12-19
• /
• 2018

When an underground limestone mine selects room-and-pillar mining method, in which the stability of mine openings is maintained by leaving safety pillars, the stability of safety pillars is always incompatible with their productivity. Therefore, the engineering decision for stability and productivity is essential. In this study, a progress of excavation faces by conventional blasting pattern has been examined in field for investigating over-break and stereo-photogrammetry method has been applied to this field measurement for improvement of accuracy. Also this result has been reflected instantly to composite blasting pattern by feedback, for minimizing overbreak. Field tests showed the relevant results that $3.5m^2$ in over-break out of $70m^2$ in total excavation face has been decreased, that is 5% of reduction rate in maximum.