• Title/Summary/Keyword: 입자 포집

Search Result 246, Processing Time 0.052 seconds

Particle Collection Efficiency Using Granular Cyclone (Granular Cyclone에 의한 입자의 포집효율)

  • 정창훈;김민철;임경수;이규원;박찬일
    • Proceedings of the Korea Air Pollution Research Association Conference
    • /
    • 2003.11a
    • /
    • pp.497-498
    • /
    • 2003
  • cyclone은 원심력을 이용하여 입자를 포집하는 집진장치로 간단한 구조 때문에 입자의 전처리 장치로 많이 사용되어 왔다. 그러나 미세 입자의 제어가 어렵고, 포집 효율의 증가를 위해 유량을 증가시킬 경우 유랑의 증가에 의한 압력손실과 에너지의 손실이 증가하며, 유량을 감소시킬 경우 입자의 포집 효율이 급격히 감소하는 점 등의 단점이 있다. 따라서, 미세 입자에 대한 포집 효율을 증가시키기 위해 싸이클론의 구조 및 형채를 변화시키는 많은 연구가 수행된 바 있다(Lim et al., 2001; Lim et al., 2003). 본 연구에서는 granule에 의한 관성충돌 효과를 이용하여, 일반적인 cyclone의 설계를 목적으로 하였다. (중략)

  • PDF

Analytic Solution of the Single Collection Efficiency between the Charged Sphere Collector and Particles (대전된 포집구와 입자의 포집효율에 관한 일반 해)

  • 이승주;정창훈;이규원
    • Proceedings of the Korea Air Pollution Research Association Conference
    • /
    • 2000.04a
    • /
    • pp.215-216
    • /
    • 2000
  • Granular Bed Filter에서의 미세입자 제거에 대한 연구, 특히 정전기력을 이용한 미세입자의 포집효율에 관한 연구는 수많은 연구자들에 의해 수행되어 왔으나, 이론식 내의 입자들의 관성, 유동장 그리고 입자에 작용하는 전기력의 복합성 때문에 직접적인 일반 해를 구하기가 어려운 것이 사실이다. 정전기력을 이용한 입자의 여과특성 및 효율에 대한 이론적 연구는 주로 외부 전기장을 주었을 경우와 포집체와 입자가 모두 대전되었을 경우를 중심으로 수행되어 왔다. (중략)

  • PDF

Application of Cyclone to Removal of Hot Particulate in Hot Cell (Hot Cell 내의 고방사능 분진 제거를 위한 사이클론 적용 실험)

  • Kim Gye Nam;Lee Sung Yeol;Won Hui Jun;Jung Chong Hun;Oh Won Zin
    • Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
    • /
    • v.3 no.1
    • /
    • pp.67-75
    • /
    • 2005
  • The size and main ingredient of hot particulate generated during the nuclide experiment in hot cells of nuclear facilities were 0.5300 $\mu$m and UO$\_2$. A cyclone filter equipment which consists of a cyclone and Bag/HEPA filter was devised to remove hot particulate generated during the nuclide experiment in hot cells of nuclear facilities. The experimental conditions to maximize the collection efficiency of hot particulate were suggested through experiments done with the cyclone filter equipment. With the large size of simulated particulate, the collection efficiency of the particulate was high. When the size of simulated particulate was more than 5 $\mu$m, the collection efficiency of the particulate was more than $80\%$ and when the size of simulated particulate was less than 1.0 urn, the collection efficiency decreased by less than $70\%$. If the inflow velocity of simulated particulate was increased, the collection efficiency of the particulate was also increased. When the inflow velocity of simulated particulate was more than 12m/sec, the collection efficiency was higher than $70\%$, but after 17 m/sec inflow velocity, no change observed. The collection efficiency of the simulated particulate can be enhanced with the length of vortex finder inside the chamber. With the length of vortex finder, 7.2cm, the observed collection efficiency of the particulate was the maximum. Moreover, when the sub-cone was attached under the cyclone, the collection efficiency of cyclone increased $2\%$. It was found that effect by attachment of sub-cone was not serious.

  • PDF

Modified Virtual Cyclone as a Particle Concentrator (싸이클론을 이용한 에어로졸 입자의 농축)

  • 임경수;김현수;이규원
    • Proceedings of the Korea Air Pollution Research Association Conference
    • /
    • 2003.11a
    • /
    • pp.483-484
    • /
    • 2003
  • 일반적으로 싸이클론은 여러 산업공정에서 입자의 분리/제어를 위해서나 대기 중의 입자상 물질을 측정하기 위해서 많이 쓰여 왔다. 하지만 싸이클론은 작은 입자에 대해서는 효율이 낮고, 완만한 포집 효율 곡선을 가지고 있기 때문에, 고효율을 얻거나 이상적인 효율 곡선을 얻는 방법에 대해서 많은 연구가 집중되었다. 최근에는 입자를 분리/포집하기 위해서 싸이클론을 사용하는 것뿐만 아니라, 일정 크기의 입자를 분리하고 농축하기 위해서 가상 싸이클론(virtual cyclone)을 사용하는 연구가 진행되고 있다. (중략)

  • PDF

Numerical Study on the Performance of the Round Type Impactor (원형 임팩터의 성능에 관한 수치적 연구)

  • 허재영;김상수
    • Transactions of the Korean Society of Mechanical Engineers
    • /
    • v.15 no.1
    • /
    • pp.292-298
    • /
    • 1991
  • Previous studies on the performance of the round type impactor were reexamined and extended to the case of high particle mass loading. It was pointed out that the previous numerical studies need to be supplemented in the numerical process. The impactor performance was calculated under the same conditions as previous studies by the exact calculation process and it was found out that a tail of the collection efficiency curve, which have not been found in the previous studies, appeared in the results of ours. Numerical results for high particle mass loading show that the value of the collection efficiency in the impactor decreases but better particle-cut characteristics can be obtained, as the amount of the particle mass loading increases.

Suggestion of separation and recollection method of nano particles from suspension by using ultrasonic atomization (초음파 무화효과를 이용한 현탁액으로부터 나노입자의 분리포집법 제안)

  • Kim, Jihyang;Kim, Jungsoon;Yeom, Jiyeong;Ha, Kanglyeol;Kim, Moojoon
    • The Journal of the Acoustical Society of Korea
    • /
    • v.35 no.6
    • /
    • pp.445-451
    • /
    • 2016
  • It is very important to obtain non-agglomerated nano particle state for practical application of nano technology. In order to improve the functionality of products using nano particles, more precise control of particle size distribution is required in their synthesis process. However, synthesized nano particles are agglomerated easily due to physical and chemical reasons, and it then veils unique properties of the nano particles and causes some troubles in their practical application. In this study, a separation method for nano particles from suspension by using the droplets as the separation space was proposed. Using the suspension of 0.002 wt. % with $TiO_2$ powder, the particle size distribution of nano particles in the recollected suspension was measured. From the results, it was confirmed that it is possible to separate and to recollect the nano particles monodispersed by using the suggested method.

A Study on Identification of Source Using SEM-EDX by Analysis of shape and chemical composition in individual Particles (SEM-EDX법을 이용한 개별입자의 형상과 화학적 조성 분석을 통한 발생원 추정에 관한 연구)

  • 염해진;전보경;최금찬
    • Proceedings of the Korea Air Pollution Research Association Conference
    • /
    • 2003.05b
    • /
    • pp.320-321
    • /
    • 2003
  • 대기중에 존재하는 입자상물질은 광범위한 입경역에 걸쳐서 다종다양한 미량화학성분으로 구성되는 분산체이고, 그 성상은 공간적으로도 시간적으로도 크게 변동한다. 입자상 물질의 화학분석법은 발생원 동정을 위한 자료로 적합하며 일반적으로는 습식의 파괴적인 원소분석으로 하는 경우가 많다. 일반적으로 화학적 분석법은 개별입자의 정보가 무시되며 필터에 포집된 bulk 시료에 의한 분석이 진행되므로 장시간 포집에 의한 단시간의 시간변동과 개개의 입자가 가지는 정보가 무시되고 평균화 되어버린다. (중략)

  • PDF

Local Exhaust Ventilation Characteristics of Coal Dust in Coal Preparation Plant of a Coal Mine (석탄광산 선탄장에서 비산분진의 국소배기 특성)

  • Lee, Seung-Chul;Jo, Woo-Hyun;Park, Young-Rok;Ok, Yun-Yong;Kim, Tae-Hyuk
    • Proceedings of the KAIS Fall Conference
    • /
    • 2009.12a
    • /
    • pp.259-262
    • /
    • 2009
  • 본 연구에서는 석탄광산 선탄장설비와 국소배기시스템의 일부를 모형화하여 포집특성과 유동특성실험을 수행하였으며 동일조건에서 수치해석을 수행하여 그 결과를 비교 검토하였다. case 5가 46.35%의 가장 높은 포집효율을 보였으며 실험의 3가지 변수 중 고무 커튼의 사용유무가 국소배기시스템의 포집효율에 가장 큰 영향을 미치는 것으로 판단된다. 또한 case 1, 5, 6에 대해 포집된 입자크기 확인 결과, 포집성능이 우수한 case 5가 입경 $20{\mu}m$ 초과 입자들이 약 55%로 가장 많이 포집된 것을 알 수 있었다. 따라서 제어거리는 0.5m 이상이 적절한 것으로 판단된다.

  • PDF

중량법에 의한 환경대기중 입자상물질의 측정정도 비교(고용량공기채취기, $PM_{10}$ 고용량공기채취기 및 미니용량공기 채취기를 중심으로)

  • 김민영
    • Proceedings of the Korea Air Pollution Research Association Conference
    • /
    • 2000.04a
    • /
    • pp.129-133
    • /
    • 2000
  • 환경대기중 입자상물질의 검사방법은 환경부고시 97-98호(97. 11. 5)에 의거 고용량공기포집법(high volume air sampler), 저용량공기포집법(low volume ai sampler), 광산란법 및 광투과법 그리고 $\beta$흡수법 등으로 되어 있다. 이중 고용량공기포집법, 저용량공기포집법, $\beta$흡수법등은 중량법의 범주에 드는 측정법으로 되어 있다. 이들 방법 중 먼지채취전후의 무게를 직접 칭량하여 분석하는 고용량공기포집법은 총부유먼지의 측정법으로, 저용량공기포집법은 $PM_{10}$의 분석에 이용되는 것이며 $PM_{10}$ 고용량공기포집기($PM_{10}$ high volume air sampler) 또는 $PM_{10}$ 분석에 이용될 수 있다. (중략)

  • PDF

Development of Atmospheric Cascade Impactor for Real-time Monitoring of Particulate Matter (PM) (입자상물질(PM) 실시간 모니터링을 위한 상압 다단임팩터 개발)

  • 권순박;임경수;배귀남;이규원
    • Proceedings of the Korea Air Pollution Research Association Conference
    • /
    • 2002.04a
    • /
    • pp.157-158
    • /
    • 2002
  • 다단임팩터(cascade impactor)는 대기환경 연구에 있어 입자상물질의 물리 화학적 분석에 유용하게 사용되고 있는 입자상물질 포집장치이다. 다단임팩터의 각 단은 외벽(stage wall), 가속노즐판(acceleration nozzle plate)과 충돌판(impaction plate)으로 구성되며 충돌판에는 입자상물질의 포집을 위하여 테플론 필터, 알루미늄 필터 등을 장착하게 되어 있다. (중략)

  • PDF