• Title/Summary/Keyword: 입자 응집

Search Result 579, Processing Time 0.029 seconds

Computer simulation of agglomeration in colloidal alumina powder suspension (콜로이드성 알루미나 분말 입자의 응집현상의 컴퓨터 시뮬레이션)

  • 김종철;오근호
    • Journal of the Korean Crystal Growth and Crystal Technology
    • /
    • v.9 no.2
    • /
    • pp.224-230
    • /
    • 1999
  • Agglomeration of colloidal alumina particles in a suspension is simulated. Particles in a suspension have potential energies between them and move to decrease the summation of all the potential energies between particles. The effects of various types of potential curves on particle agglomeration were checked. Strong short range attractive energy without repulsive energy barrier makes small strong clusters with disordered network structure but weak short-range force with big repulsive energy barrier makes big agglomerates with a close packing structure. As particles are agglomerated the potential energy with strong repulsive energy barrier between agglomerates gradually decreases the importance of the repulsive energy barrier and induces a different type of agglomeration behavior.

  • PDF

Experimental and Numerical Study of Aerosol Coagulation by Gravitation (에어로졸 입자의 중력응집에 관한 실험 및 수치적 연구)

  • 권순박;이규원
    • Proceedings of the Korea Air Pollution Research Association Conference
    • /
    • 1999.10a
    • /
    • pp.119-120
    • /
    • 1999
  • 응집은 입자들간의 상대운동에 의하여 두 입자가 충돌하여 하나의 입자가 되는 것을 말하는데, 상대 운동을 유발하는 원인에 따라 중력응집(gravitational coagulation)을 비롯하여 브라운응집(Brownian coagulation), 난류응집(turbulent coagulation)등으로 나뉜다. 브라운응집 및 난류응집에 비하여 상대적으로 중력응집은 해석적으로 풀기가 어렵고 실험에 대한 연구가 국내외는 물론 외국에서도 전무한 실정이다.(중략)

  • PDF

Simulation Study on the Effects of Heating Rate and Particle Size Distribution for the Formation of the Agglomerate During CWM Combustion (CWM 연료의 연소시 입자 가열속도와 입자 크기가 CWM 응집물 형성에 미치는 영향에 관한 전산모사 연구)

  • Kim, Soo-Ho;Kim, Young-Hwan;Hwang, Kap-Sung;Hong, Song-Sun
    • Applied Chemistry for Engineering
    • /
    • v.9 no.3
    • /
    • pp.364-371
    • /
    • 1998
  • A theoretical model of particle agglomeration was developed to investigate the adhesive force between contiguous coal particles in CWM agglomerate. While heating bituminous coal to about $400^{\circ}C$ or above, the transient occurrence of plastic behavior of coal particles can be observed. The adhesive force in the process of agglomeration of coal particles was found to be proportional to the duration of plasticity of the particles. In the research, how the heating rate and the particle size distribution of CWM fuel influenced the formation of the agglomerate in CWM fuel at the heat-up stage was investigated by the model of particle agglomeration. Simulation program used to this experiment was RKG method and was programmed by Fortran. It was represented that by the model of particle agglomeration, the adhesive force in the process of the particle agglomeration in CWM fuel was inversely proportional to the heating rate but proportional to particle size.

  • PDF

Asymptotic Particle Size Distributions Attained during Coagulation Processes (에어로졸 입자의 응집과정에서 얻어지는 자기보존 크기분포에 관한 연구)

  • 박성훈;이규원
    • Proceedings of the Korea Air Pollution Research Association Conference
    • /
    • 2000.11a
    • /
    • pp.377-378
    • /
    • 2000
  • 에어로졸 입자들의 물리적, 화학적 성질 및 인체에 미치는 영향 등은 입자의 크기분포에 밀접하게 관련되어 있다. 에어로졸 입자의 응집현상은 입자의 크기분포 변화를 일으키는 주된 메커니즘의 하나로서 여러 응용 및 기초 연구에 필수적으로 사용된다. 응집에 의한 입자크기분포의 변화는 다음 식으로 나타낼 수 있다. (중략)

  • PDF

A Study on the Relationship between Concentration and Settling Velocity of Cohesive Sediment (점착성 유사의 침강 속도와 농도의 관계에 대한 고찰)

  • Son, Minwoo;Byun, Jisun;Park, Byeoungeun
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2019.05a
    • /
    • pp.87-87
    • /
    • 2019
  • 흔히 진흙으로 대표되는 점착성 유사는 모래와 같은 비점착성 유사와 달리 응집 현상으로 인해 지속적으로 유사 입자의 크기가 변화한다. 응집 현상은 점착성 유사 입자의 응집 과정과 파괴과정으로 구성된다. 응집 현상 중 응집 과정은 유사 입자 간의 충돌로 인해 발생하는 것으로 이해되며, 충돌을 야기하는 메커니즘으로는 브라운 운동(Brownian Motion), 차등침강(Differential Settling), 난류 전단 (Turbulent Flow Shear)이 있다. 파괴 과정은 입자간 충돌로 인해 깨지는 것이 아닌 난류 전단(Turbulent Shear)로 인한 덩어리 분리(Massive Splitting)가 발생하는 것으로 이해한다. 이러한 유체의 특성, 흐름 특성 (난류 거동) 뿐만 아니라 유사 입자의 특성 모두의 영향을 받으며 지속적인 응집 현상을 겪는 점착성 유사 입자들은 하나의 커다란 덩어리인 플럭(Floc)을 형성한다. 형성된 플럭의 구조는 프랙탈 기하학을 따르는 것으로 이해된다. 따라서 플럭의 구조는 자기 유사성을 띠며, 플럭의 밀도는 형성된 플럭 크기의 함수가 된다. 플럭의 크기가 증가할수록 플럭의 프랙탈 차원이 감소하며, 플럭의 밀도는 감소한다. 많은 이전의 연구에서 플럭의 침강 속도를 농도에 따른 함수로 가정하고 경험식을 이용하여 산정하나, 유사 입자의 침강 속도는 크기와 밀도의 함수임을 Stokes Law를 통해 생각해 볼 수 있다. 이에 본 연구에서는 응집 현상의 결과물로 형성된 응집물의 크기와 밀도를 각각 산정하고, Stokes Law를 이용하여 침강 속도와 응집물 크기의 관계에 대한 연구를 수행하고자 한다. 보다 심도 있는 연구를 위해서는 응집 현상을 야기하는 메커니즘에 대한 이해가 필수적이다. 간소화된 응집 모형으로부터 얻어진 플럭 크기를 이용하여 프랙탈 차원, 플럭의 밀도를 산정한다. 형성된 응집물의 크기와 침강 속도의 관계에 대한 이해를 통해 보다 정확한 플럭의 침강 속도 산정이 가능할 것으로 생각된다.

  • PDF

Effects of coarse mode aerosol on the size distribution by coagulation and condensation processes (응집 및 응축과정에 의한 대기 에어로졸 크기 분포에서의 coarse mode의 영향)

  • 정창훈;김용표;이규원
    • Proceedings of the Korea Air Pollution Research Association Conference
    • /
    • 2000.04a
    • /
    • pp.158-159
    • /
    • 2000
  • 내기중의 입자 (aerosol)는 크게 직경이 0.01-0.1 $\mu\textrm{m}$ 대의 Aitken mode와 0.1-1 $\mu\textrm{m}$ 부근의 accumulation mode, 그리고 1 $\mu\textrm{m}$ 이상의 coarse mode로 분류할 수 있으며 대기 중에서 부유하여 서로응집(coagulation) 과 응축(condensation)풍의 과정을 겪으며 변화한다. 일반적으로 Aitken mode 의 입자들은 nucleation 둥에 의해 발생된 입자이며, accumulation mode는 Aitken mode입자간의 응집, 인위적인 배출 둥에 의하여 생성된 입자이다. Coarse mode는 주로 자연적으로 생성된 입자이며 주로 침적에 의해 제거된다. (중략)

  • PDF

Bio-mediated Flocculation by Extracellular Polymeric Substances in Cohesive Sediment Suspensions: Experimental Study (생체고분자물질이 부유사 응집에 미치는 영향 연구)

  • Baek, Seung-Ryong;Kim, Jae-In;O, Min-Ji;Lee, Byeong-Jun
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2015.05a
    • /
    • pp.107-107
    • /
    • 2015
  • 최근 기후변화로 인한 강우강도 증대, 산업화에 따른 토지개발 등으로 인하여 다량의 점착성 부유사(Cohesive Sediments)가 하천, 호소 등 수자원 환경으로 유입되고 있다. 점착성 부유사는 하천, 호소의 난류 조건에 따라 부유하거나 혹은 응집, 침전하여 하상 저니층을 형성한다. 부유사, 미생물 및 각종 유기입자가 포함된 하상 저니층은 검은색으로 외관상 보기 좋지 않을 뿐 아니라, 혐기성상태에서 부패하여 수생태계의 건강성을 해치게 된다. 또한 미세 부유사 및 미생물 입자는 각종 중금속, 유기오염물질을 흡착하고, 조건에 따라 재용출할 수 있는 저장매체로 작용하기 때문에 수자원환경에 미치는 영향이 아주 크다. 특히, 수중 미생물(조류) 작용에 의해 생성되는 EPS (Extracellular Polymeric Substances)는 부유사 및 미생물 입자들을 서로 엉겨 붙게 하여, 부유사-미생물 혼합 응집체 및 저니층 형성을 가속화하게 된다. 본 연구에서는 EPS가 부유사 응집에 미치는 영향을 파악하기 위하여, Xanthan Gum (Sigma-Aldrich, USA)을 EPS의 지표 물질로 사용하고, Kaolinite(Sigma-Aldrich, USA)를 수자원환경에 존재하는 대표적인 부유사로 사용하여 응집실험(Jar Test)을 수행하였다. 이온농도가 응집에 미치는 영향을 파악하기 위하여 수체 이온농도를 0.0001M NaCl, 0.001M NaCl, 0.01M NaCl, 그리고 0.001M NaCl + 0.1mg/L $Ca^{2+}$, 0.001M NaCl + 0.5mg/L $Ca^{2+}$, 0.001M NaCl + 1.0 mg/L $Ca^{2+}$으로 보정하여 응집실험을 수행하였다. 250 rpm 급속 교반 1븐, 50 rpm 완속교반 5시간, 침잔 1시간 후 응집체를 채취하여 응집체 이미지 분석을 통해 응집체 크기 및 형상을 측정하였고, 수표면 2 cm 지점에서 상등액을 채수하여 잔류 고형물 농도 분석을 실시하였다. 응집실험을 통하여 다음과 같은 결과를 도출하였다.. 낮은 이온농도의 경우, EPS가 큰 고분자 구조체에 부유 입자들이 엮어 응집되는 Sweeping Flocculation의 특징을 나타내었다. 하지만, 이온농도가 높아질수록 경우, EPS 고분자 구조체 내부 반발력이 감소하여 크기가 축소되고, 이에 따라 부유 입자 표면에 패치 형태로 흡착되었다. EPS가 패치형태로 입자에 흡착한 경우, 응집제 농도 증가에 따라 응집능 최적점이 형성되고, 이후 표면하전 역전이나 Steric Stabilization에 의해 응집능이 저감되는 형태를 나타낸다. 따라서,수중이온농도가 EPS의 사슬형 고분자 응집제의 크기, 형태(Morphology)를 결정하고, 더 나아가 응집능을 결정하는 중요한 인자로 나타났다. 따라서, 후속 연구를 통하여 생체고분자물질의 크기 및 형태 변화, 이에 따른 응집능변화를 면밀히 연구하고자 한다.

  • PDF

Development of the hi-speed composite cohesive device for reduction of particulate pollutants in storm water runoff (초기강우 유출수의 입자성 오염물질 처리를 위한 고속복합응집장치 개발)

  • Choi, Sunhwa;Lee, Jinkyung;Lee, Seungheon;Kim, Heungseop
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2017.05a
    • /
    • pp.197-197
    • /
    • 2017
  • 본 연구에서는 입자성 오염물질을 다량 함유하고 있는 초기강우 유출수를 처리하기 위한 수처리 시설로 고속복합응집장치를 개발하였다. 고속응집복합장치의 요소기술은 마이크로 버블, 급속교반장치(인라인믹서), 전기촉매를 이용한 부상촉진장치, 볼텍스 흐름 등으로 구성되며, 기술 원리는 응집제에 의해 오염물질을 응결, 응집, 부상시켜 스컴을 제거하는 일반 응집 원리와 유사하다. 본 기술의 특징은 교반, 혼화조, 응집제를 1개의 조에 컴팩트하게 구성하여 체류시간을 10분 이내로 단축하였고, 볼텍스(voltex) 흐름을 이용한 선회류와 루버홀 형태의 스크린을 적용하여 응집효과를 극대화하였으며, 플럭에 의한 막힘이 없이 스크리닝이 이루어질 수 있도록 하였다. 또한, 부상촉진장치(전기유도)를 이용해 응집 플럭의 부상효과를 상승시켰고, 감속기와 일체화된 내통스크린이 선회류와 반대 방향으로 회전하면서 볼텍스 흐름의 가속효과에 의한 스크린 폐색 방지 및 응집부상 효율을 향상시킬 수 있도록 설계하였다. 부상슬러지는 별도의 플럭 제거 설비 없이 스크린 내통 회전에 이용되는 감속기에 부착된 스컴 제거기에 의해 동시 제거가 가능하며, 응집부상 처리수는 장치 가장 바깥 외곽에 충진된 필터층에서 최종 여과되어 방류되도록 구성함으로서 모든 처리공정이 단일 장치 내에서 이루어지도록 구성하였다. 본 고속복합응집장치는 전체 규격 ¢ $1000{\times}2,000mmH$의 시제품이 제작되어 현재 시흥소재 매화저수지에서 성능평가를 실시하고 있다.

  • PDF

Theoretical Analysis of Heat Pipe Thermal Performance According to Nanofluid Properties (나노유체 특성에 따른 히트파이프 성능해석)

  • Lim, Seung Min
    • Transactions of the Korean Society of Mechanical Engineers B
    • /
    • v.39 no.7
    • /
    • pp.599-607
    • /
    • 2015
  • In this study, we theoretically investigate the thermal performances of heat pipes that have different nano-fluid properties. Two different types of nano-particles have been used: $Al_2O_3$ and CuO. The thermal performances of the heat pipes are observed for varying nano-particle aggregations and volume fractions. Both the viscosity and the conductivity increase as the volume fraction and the aggregation increase, respectively. Increasing the volume fraction helps increase the capillary limit in the well-dispersed condition. Whereas, the capillary limit is decreased under the aggregate condition, when the volume fraction increases. The dependence of the heat pipe thermal resistance on the volume fraction, aggregation, and conductivity of the nano-particles is analyzed. The maximum thermal transfer of the heat pipe is highly dependent on the volume fraction because of the high permeability of the heat pipe. For the proposed heat pipe, the optimum volume fraction of the nano-particle can be seen through 3D graphics.

Synthesis of Cu Nanoparticles through a High-Speed Chemical Reaction between Cuprous Oxide and Sulfuric Acid and Enhancement of Dispersion by 3-Roll Milling (아산화동과 황산간의 고속 화학반응에 의한 미세 Cu 입자의 합성과 삼본밀에 의한 분산성 개선)

  • Chee, Sang-Joo;Lee, Jong-Hyun;Hyun, Chang-Yong
    • Journal of the Microelectronics and Packaging Society
    • /
    • v.23 no.4
    • /
    • pp.125-133
    • /
    • 2016
  • With the aim of using a filler material in a conductive paste, fine Cu nanoparticles were synthesized through the high-speed chemical reaction between cuprous oxide ($Cu_2O$) powder and sulfuric acid in distilled water. Under external temperature of $7^{\circ}C$, sulfuric acid concentration of 48%, and $Cu_2O$ amount of 30 g, the $Cu_2O$ particles were eliminated and slightly aggregated Cu nanoparticles were synthesized. Futhermore, Cu nanoparticles of 224 nm, in which the aggregation between particles was obviousiy much suppressed, were synthesized with the choice of an additive. In the particle sample, occasionally there are coarse particles formed by the aggregation of fine nanoparticles and weak linkages between the nanoparticles. However, the coarse particles were destroyed and the linkages were broken after mixing with a resin formulation, indicating the behavior of untangling the aggregation between nanoparticles.