• Title/Summary/Keyword: 입자침착

Search Result 81, Processing Time 0.05 seconds

Log-normal Size Distribution Theory for Deposition of Polydisperse Aerosol Particles (대수정규분포를 이용한 다분산 에어로졸의 침착에 관한 연구)

  • 박성훈;이규원
    • Proceedings of the Korea Air Pollution Research Association Conference
    • /
    • 1999.10a
    • /
    • pp.191-193
    • /
    • 1999
  • 닫힌 반응기 내부에 부유하는 에어로졸 입자들의 크기분포는 응집, 응축, 확산에 의한 침착, 중력침강 및 누출과 같은 여러 기작들에 의해 변화한다. 특히 확산 및 중력침강에 의해 일어나는 입자의 침착(deposition)은 에어로졸 측정기기의 오차분석, 호흡기내부의 미세입자 침착, 건물내부의 입자상 물질의 농도 및 크기분포 변화 등 여러 응용분야에 관련되는 중요한 기작이다.(중략)

  • PDF

Study on the Regional Deposition of Smoke Particles in Human Respiratory Tract under the Variation of Fire and Breathing Conditions (화재 및 호흡조건 변화에 따른 연기입자의 인체 호흡기 내 영역별 침착량 분석)

  • Goo, Jaehark
    • Fire Science and Engineering
    • /
    • v.33 no.6
    • /
    • pp.95-104
    • /
    • 2019
  • Smoke generated in a fire consists of gaseous substances and particulate matter, such as unburned carbon that adsorbed the gases. Human injury caused by inhalation of gaseous substances present in smoke is mostly short-term, whereas damage caused by inhalation of particulate matter is relatively a long-term phenomenon depending on the state of the gas-phase adsorption. The amount and location of the deposited smoke particles are important factors in estimating the damage caused to humans, which are affected by the breathing conditions as well as particle conditions, such as the size and concentration affected by the combustion conditions. In this study, in order to understand the characteristics of the deposition of smoke particles in the respiratory tract related to the study of human smoke inhalation injury, the number and mass concentration of smoke particles deposited in different areas of the respiratory tract for different fuel types, combustion conditions and breathing conditions were calculated. In addition, the amount of mass deposition of smoke in the respiratory tract for a certain period of inhalation was compared with the atmospheric standard of fine dust.

Development of Packed Bed Lung Model for the Deposition Studies of Fire Smoke (흡입연기의 침착 실험을 위한 충전층 폐모델 개발에 관한 연구)

  • Goo, Jae-Hark
    • Fire Science and Engineering
    • /
    • v.22 no.2
    • /
    • pp.121-128
    • /
    • 2008
  • Adverse health effects of inhaled smokes are associated with the amount of the particles deposited in human lung. Lung model is needed to simulate smoke deposition because of the hardness of the in vivo deposition experiment. However, it is hard to realize the successively decreasing bifurcations in the model. In this work, an experimental lung model was developed to simulate the smoke deposition in the lung. Instead of bifurcating airways, the lung model was made of packed beds of which size decreased downwards. The experimental results using this model showed good agreements with existing results for real lung in the deposition characteristics. The model could be applied to the studies of health risk assessment of the inhaled smoke particles generated by fire.

Development of Monitoring Techniques for PM10, PM2.5 and PM1 (PM10, PM2.5 및 PM1 모니터링 기술 개발)

  • 권순박;임경수;이규원
    • Proceedings of the Korea Air Pollution Research Association Conference
    • /
    • 2001.11a
    • /
    • pp.329-330
    • /
    • 2001
  • 대기오염물질은 입자상물질과 가스상물질로 구분되는데, 이 중 입자상물질은 시정을 감소시키고 인체 건강에 유해한 영향을 미친다. 일반적으로 입자크기가 큰 거대입자는 인체 호흡기관에서 대부분 차단되거나 다시 밖으로 나오게 되지만, 입자크기가 작은 미세입자의 경우 대부분 폐의 깊은 곳에 침착하여 인체에 매우 유해하다. 이러한 미세입자의 유해성 때문에 우리나라도 1995년부터 PM10에 대한 대기환경기준을 설정하여 그 양을 규제하고 있다. 최근에는 폐에 높은 침착률을 보이는 PM2.5에 대한 관심이 집중되고 있다. (중략)

  • PDF

Development of Electrical Method for $PM_{2.5}$ Measurement (전기적 방법을 이용한 $PM_{2.5}$ 실시측정기술)

  • 이윤정;이규원
    • Proceedings of the Korea Air Pollution Research Association Conference
    • /
    • 2000.11a
    • /
    • pp.91-92
    • /
    • 2000
  • 입자상 대기오염물질은 기후변화 및 시정감소의 원인이 될 뿐만 아니라 인체의 건강에 유해한 영향을 미친다. 특히 입자크기가 작은 미세입자는 폐의 깊은 곳에 침착되어 인체의 호흡기 건강에 매우 유해하다. 1995년 우리나라에서 PM10을 대기환경기준에 포함시킨 것도 이러한 미세입자의 인체에의 악영향을 고려한 것이라 할 수 있다. 최근에는 더 미세한 입자로서 폐에 큰 침착률을 보이고 실질적으로 호흡기 건강에 악영향을 미치는 입자인 PM/sub 2.5/에 눈을 돌려 규제의 움직임을 보이고 있다. (중략)

  • PDF

Characteristics of PCDD/Fs Deposited on Pine Needles (소나무잎에 침착된 PCDD/Fs 특성)

  • Chun, Man-Young
    • Journal of Korean Society of Environmental Engineers
    • /
    • v.27 no.6
    • /
    • pp.599-605
    • /
    • 2005
  • The characteristics of PCDD/Fs were studied when accumulating on 1 to 4 year old pine needles that were used as passive samplers of atmospheric POPs. The rate of concentration increase was linear in lower(tetra- through hexa-) chlorinated PCDD/Fs, but higher (hepta- and octa-) chlorinated homologue concentrations did not increase with needle age. The lower were in gas phase and the higher in particles. Photodegradation rates of PCDDs on pine needles were similar to PCDFs, higher chlorinated PCDD/Fs tend to photolyze quickly. Therefore it is recommended that the younger needles should be collected to avoid errors from the depositional accumulation rates and photodegradation, and that, when comparing local concentrations of PCDD/Fs, needles of same age should be collected to reduce the errors.

Characteristics of Particle Deposition onto Cleanroom Wall Panel for Varying Particle Charging Rates (입자하전량에 따른 클린룸 수직벽체로의 입자침착 특성)

  • Kim, Jong-Jun;Noh, Kwang-Chul;Sung, Sang-Chul;Baek, Sun-Ho;Oh, Myung-Do
    • Proceedings of the SAREK Conference
    • /
    • 2008.06a
    • /
    • pp.725-730
    • /
    • 2008
  • In this study, we found out charged particle's deposition characteristic by experiments of $0.5{\mu}m$, $1.0{\mu}m$, $3.0{\mu}m$ size particle's concentration decay. We carried out the experiments on charged particle deposition onto the vertical cleanroom wall panel and some other fundamental experiments. The particle deposition mechanism is consist of sedimentation, convection, diffusion, thermophoresis, electrostatic and so on. Particle size determines mainly working deposition mechanism. The charged particle is made with corona discharge that are constituted field charging and diffusion charging. In addition, this combinational mechanism is called combined charging. The type of corona discharge determines quantity of particle electrical charge. In conclusion, we assumed that quantity of particle electrical charge accelerations deposition velocity onto the vertical cleanroom wall panel and proved it. And we figured out particle's deposition characteristic through compared between our experiment's results.

  • PDF

Design and Test of a $2.5\mu\textrm{m}$ Cut-off Size Inlet Based on Particle Cup Impactor (컵임팩터를 사용한 $PM_{2.5}$ 도입부 설계 및 성능 평가)

  • 한영택;김현태;이규원
    • Proceedings of the Korea Air Pollution Research Association Conference
    • /
    • 1999.10a
    • /
    • pp.124-125
    • /
    • 1999
  • 대기중에 부유하는 미세입자는 인체에 유해한 영향을 미칠 수 있어, 입자 포집 방법에 대한 관심이 높아지고 있다. 부유 에어로졸 입자중 $10\mu\textrm{m}$ 크기 이하의 미세입자는 인체의 흉관 부위까지 도달할 수 있다. 특히 약 $2.5\mu\textrm{m}$ 크기 이하의 입자는 폐포관에 침착할 가능성이 매우 커서, 입자의 화학조성, 침착 부위에 따라서 인체에 유해 정도가 달라질 수 있다. 최근에 미국 EPA에서는 부유분진 입자의 규제를 $2.5\mu\textrm{m}$ 이하입자의 질량 농도에 두고 있다.(중략)

  • PDF

Deposition of Inhaled Smoke Particles Produced by Fire (화재에 의한 흡입연기의 호흡기 내 침착에 관한 연구)

  • Goo, Jae-Hark
    • Fire Science and Engineering
    • /
    • v.21 no.2 s.66
    • /
    • pp.64-73
    • /
    • 2007
  • The absorption characteristics of hazardous materials onto human body and defense mechanism differ from each other region within the respiratory tracts, thus adverse health effects of inhaled smokes are associated with not only the concentration but also the location of the particles deposited. In this work, the deposition fraction per surface area and the deposition sites of the smoke particles in human respiratory tracts for each rest and light exercise conditions together with oral and nasal breathing were calculated by using segmental volume tracking method. The results would be used for deriving the amount of absorption of hazardous materials onto human body, thus contribute to the health risk assessments of inhaled fire smokes.

탄소나노튜브 나노유체의 파울링 현상에 따른 열적 특성에 대한 연구

  • Mun, Ji-Eun;Kim, Yeong-Hun;Kim, Nam-Jin
    • Proceedings of the Korean Vacuum Society Conference
    • /
    • 2016.02a
    • /
    • pp.383.1-383.1
    • /
    • 2016
  • 열전달 시스템에서 임계 열유속 발생 시 시스템의 물리적 손상을 야기하기 때문에 비등 열전달에서 임계 열유속은 열전달 시스템의 한계 또는 안전성을 나타낸다. 따라서 열전달 시스템의 안정성을 위해서는 임계 열유속 향상이 필수적이다. 최근에는 나노유체를 열전달 시스템에 적용할 경우 임계 열유속이 증가한다고 보고되었다. 하지만 나노유체는 원전 및 각종 열전달 시스템에 적용 시 나노입자가 열전달 표면에 침착되는 파울링 현상을 발생시킬 수 있으며, 이 때문에 시스템의 열효율이 크게 감소할 수 있다. 따라서 본 연구에서는 열전달 시스템에 나노유체를 적용했을 때, 나노유체의 침착현상이 시스템에 미치는 영향을 분석하였다. 그 결과 유속과 코팅시간이 증가할수록 산화처리된 다중벽 탄소나노튜브 나노유체의 임계 열유속이 크게 증가하고 있음을 확인할 수 있다. 하지만 나노입자 침착정도와 유속이 증가할수록 비등 열전달 표면과 유체의 포화온도의 차이인 과열도가 상당히 크게 증가함을 알 수 있었으며, 열전달 계수는 순수 물의 0 m/s의 비등 열전달 계수와 비교하면 감소하는 것을 확인하였다.

  • PDF