• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.8 no.4
• /
• pp.311-318
• /
• 2010

U. S. NRC Regulation Guide 1.52 regulating ESF ACS in nuclear power plants has been revised to revision 3. To apply reduction of operability test time, allowance of alternative challenge agents for in-place leak test of HEPA filters, and upgrade of Methyl Iodide penetration acceptance criterion in activated carbon performance test suggested in Reg. Guide 1.52(Rev.3) on Yonggwang units 5 and 6 ESF ACSes, technical feasibility study was carried out with on-site experiments as well as experiments with a lab-scale model. It was confirmed that the moisture in the system returned to the level before the test in 1 or 4 days even though the moisture was removed during the operability test lasting more than 10 hours. Therefore, it is appropriate to perform monthly operability test in 15 minutes just long enough to check the operability of equipment. To change challenge material for in-place HEPA filter leak test, size of aerosol, production rate, and leak detection capability were compared for DOP and PAO. It was concluded that PAO can be substituted for DOP in nuclear power plants. The upgrade of Methyl Iodide penetration acceptance criterion from 0.175 % to 0.5 % in active carbon filter bed deeper than 4 inches was to conform to the change of activated carbon performance test method to ASTM D3803(1989). It was confirmed that Methyl Iodide penetration acceptance criterion of 0.5 % under $30^{\circ}C$, relative humidity 95 % condition was conservatively good enough for testing performance of active carbon insitu. The licence change of Yonggwang units 5 and 6 has been completed based on this study.

• Applied Biological Chemistry
• /
• v.38 no.1
• /
• pp.55-62
• /
• 1995

To understand the molecular structure of Korean garlic viruses, cDNA cloning of virus genomic RNA was attempted. Virus particles were isolated from virus-infected garlic leaves and a cDNA library was constructed from garlic virus RNA. One of these clones, S81, selected by random sequencing has been identified as a member of potexvirus group other than potyvirus and carlavirus. The clone is 873 bp long contains most of the coat protein (CP) coding region and 3'-noncoding region including poly(A) tail. A putative polyadenylation signal sequence (AAUAAA) and the hexanucleotide motif (ACUUAA), a replicational cis-acting element conserved in the 3'-noncoding region of potexvirus RNAs are noticed. The clone S81 shows about 30-40% identity in both nucleotide and amino acid sequences with CPs of potexviruses. The genome size of the virus was analysed to be 7.46 knt by Northern blot analysis, which was longer than those of other potexviruses. The open reading frame encoding CP was expressed as a fusion protein (S81CP) in Escherichia coli and the recombinant protein was purified by immobilized metal binding affinity chromatography. Polyclonal antibody was raised against S81CP in rabbit to examine the occurrence of garlic potexvirus in Korean garlic plants by immunoblot analysis. Two virus protein bands of Mr 27,000 and 29,000 from garlic leaf extract of various cultivars reacted with the antibody. It was shown that Mr 27,000 band might not be a degradation product of Mr 29,000 band, suggesting that two types of potexvirus different in size of coat protein could exist in Korean garlic plants.

• Journal of Applied Biological Chemistry
• /
• v.57 no.1
• /
• pp.65-72
• /
• 2014

Biochar (BC) from biomass pyrolysis is a carbonaceous material that has been used to remove various contaminants in the environment. The eliminatory action for burcucumber (Sicyos angulatus L.) as an invasive plant is being consistently carried out because of its harmfulness and ecosystem disturbance. In this study, burcucumber biomass was converted into BCs at different pyrolysis temperatures of 300 and $700^{\circ}C$ under a limited oxygen condition. Produced BCs were characterized and investigated to ensure its efficiency on antibiotics' removal in water. The adsorption experiment was performed using two different types of antibiotics, tetracycline (TC) and sulfamethazine (SMZ). For the BC pyrolyzed at a high temperature ($700^{\circ}C$), the values of pH, electrical conductivity, and the contents of ash and carbon increased whereas the yield, mobile matter, molar ratios of H/C and O/C, and functional groups decreased. Results showed that the efficiency of BCs on antibiotics' removal increased as pyrolysis temperature increased from 300 to $700^{\circ}C$ (38 to 99% for TC and 6 to 35% for SMZ). The reaction of ${\pi}-{\pi}$ EDA (electron-donor-acceptor) might be involved in antibiotics' adsorption to BCs. BC has potential to be a superior antibiotics' adsorbent with environmental benefit by recycling of waste/invasive biomass.

• The Journal of the Petrological Society of Korea
• /
• v.16 no.3
• /
• pp.116-128
• /
• 2007

Detailed geological mapping, petrographic study, analyses of geochemistry and magnetic susceptibility, and K-Ar dating were carried out in order to determine the origin, age, and stratigraphic implications of granitic rock fragments in the pyroclastic rocks, SE Jinhae city, southern part of the Gyeongsang Basin. As a result, it was found that the area is composed of volcanics and tuffaceous sediments of the Yucheon Group, Bulguksa granites, pyroclastics bearing granitic rock fragments, $basalt{\sim}basaltic$ andesite, and rhyolite in ascending stratigraphic order. The granitic rock fragments in the pyroclastic rocks are divided into granodiorite and biotite granite, which have approximately the same characteristics as the granodiorite and the biotite granite of the Bulguksa granites, respectively, in and around the study area including color, grain size, mineral composition, texture (perthitic and micrographic textures), intensity of magnetic susceptibility (magnetite series), and geochemical features (calc-alkaline series and REE pattern). This leads to the conclusion that the rock fragments originated from the late Cretaceous Bulguksa granites abundantly distributed in and around the study area, but not from the basement rocks of the Yeongnam massif or the Jurassic granites. Based on relative and absolute ages of various rocks in the study area, the pyroclastics bearing granitic rock fragments are interpreted to have erupted between 52 and 16 Ma, i.e. during the Eocene and early Miocene. These results indicate that the various volcanisms, acidic to basic in composition, occurred after the intrusion of the Bulguksa granites, contrary to the general stratigraphy of the Gyeongsang Basin. Very detailed and cautious mapping together with relative and absolute age determinations are, thus, necessary in order to establish reliable stratigraphy of the Yucheon Group in other areas of the Gyeongsang Basin.

• Journal of the Korea Concrete Institute
• /
• v.18 no.5 s.95
• /
• pp.687-693
• /
• 2006

The Stone Powder Sludge(below SPS) is the by-product from the process that translates stone power of 8mm under as crushed fine aggregate. It is the sludge as like cake that has average particle size of $7{\mu}m$, absorbing water content of 20 to 60%, and $SiO_2$ content of 60% over. Because of high water content of SPS, it is not only difficult to handle, transport, and recycle, but also makes worse the economical efficiency due to high energy consuming to drying. This study is aim to recycle SPS as it is without drying. Target product is the lightweight foamed concrete that is made from the slurry mixed with pulverized mineral compounds and foams through hydro-thermal reaction of CaO and $SiO_2$. Although in the commercial lightweight foamed concrete CaO source is the cement and $SiO_2$ source is high purity silica powder with $SiO_2$ of 90%, we tried to use the SPS as $SiO_2$ source. From the experiments with factors such as foam addition rate and replacement proportion of SPS, we find that the lightweight foamed concrete with SPS shows the same trends as the density and strength of lightweight foamed concrete increases according to decrease of foam addition rate. But in the same condition, the lightweight foamed concrete with SPS is superior strength and density to that with high purity silica. This trends is distinguished according to increase of replacement proportion of SPS, also the analysis of XRF shows that the hydro thermal reaction translates SPS to tobermorite. Although SPS has low $SiO_2$ contents, the lightweight foamed concrete with SPS has superior strength and density, because it reacts well with CaO due to extremely fine particles. We conclude that it is possible to replace the high purity silica as SPS in the lightweight foamed concrete experimentally.

• Korean journal of applied entomology
• /
• v.18 no.1 s.38
• /
• pp.1-10
• /
• 1979

An inclusion forming virus isolated from a fan webworm, Hyphantria cunea, in 1975 was identified as a nuclear polyhedrosis virus. With the virus isolated in Korea, it was considered that the virus would be one of the valuable microorganism in microbial control. In this connection, 1) the shape and size of the virus for identification, 2) susceptibility of the various instar larvae to the virus, 3) the effects of storage condition on the pathogenicity and the cross infection of the virus to the larvae of Bombyx mori were examined. The results are summarized as follows; 1. The polyhedron was tetrahedron or hexahedron of $2\mu$ in size and the rod-shaped virus particles consisting of $2\~14$ rods in a bundle were $330m{\mu}\times35m{\mu}$ in size. 2. The hexagonal nuclear polyhedra were found only in the nucleus of the midgut cells but were variable in size. 3. The $LD_{50}$ values for the various instar larvae of H. cunea were $8.377\times10^4\;PIBs/ml$ for the second, $4.974\times10^5\;PIBs/ml$ for the fifth instar larvae. The $LT_{50}values$ for $10^6\;PIBs/ml$ were 9.6 days for the second, 11.5 days for the third, 12.0 days for the fourth and 17 days for the fifth instar larvae. 4. The susceptibility of H. cunea to the nuclear polyhedrosis virus was greater in the first generation than in the second generation. 5. The effect of the storage conditions on the pathogenicity of the nuclear polyhedra was less in refrigerator $(5^{\circ}C)$ and in freezing $(-80^{\circ}C)$ than in room temperature $(18.5^{\circ}C)$, especially as air-dried polyhedra than as suspension. The pathogenicity of the polyhedra seemed to decrease by sunlight during storage as cadavers, since rather greater decrease in pathogenicity was found in sunny condition than in shady condition. 6. The effective spray concentration was $6.4\times10^7\;PIBs/ml$ in the field and its $LT_50$ values for the third and the fifth instar larvae were 4.8 days and 14.2 days, respectively. 7. No cross infections were found in the nuclear polyhedrosis virus between H. cunea and B. mori. larvae.

• Journal of Plant Biotechnology
• /
• v.38 no.4
• /
• pp.293-300
• /
• 2011

This study is conducted to develop an efficient transformation system via particle bombardment with PLBs (Protocorm-like bodies) in Cymbidium. For this, pCAMBIA3301 vector which carries a herbicide-resistant bar gene and gus gene as a reporter gene was used for transformation with Cymbidium cultivars 'Youngflower ${\times}$ masako' line. To select transformants, proper concentration of herbicide, PPT (phosphinotricin), should be determined. As a result, 5 mg/l of PPT was selected as a proper concentration. Further, proper conditions for particle bombardment were determined to obtain a high frequency of transformation. Results showed that 1.0 ${\mu}g$ of DNA concentration, 1,100 and 1,350 psi for helium gas pressure, 1.0 ${\mu}m$ of gold particle and 6 cm of target distance showed the best result for the particle bombardment experiment. Also, pre-treatment with combination 0.2 M sorbitol and 0.2 M mannitol for 4 hrs prior to genetic transformation increased the transformation efficiency up to 2.5 times. Using transformation system developed in this study, 3.2 ~ 4.0 transgenic cymbidium plants can be produced from 100 bombarded PLBs on average. Putative transgenic plants produced in this system confirmed the presence of the bar gene by PCR analysis. Also, leaves from randomely selected five transgenic lines were applied for Basta solution (0.5% v/v) to check the resistance to the PPT herbicide. As a result, three of them showed resistance and one of them showed the strongest resistance with the maintenance of green color as non-transformed plants showed. Using this established transformation system, more genes of interests can be introduced into Cymbidium plants by genetic transformation in the future.

• Journal of Korea Spatial Information System Society
• /
• v.9 no.1
• /
• pp.105-115
• /
• 2007

Data mining extracts interesting knowledge from a large database. Among numerous data mining techniques, research work is primarily concentrated on clustering and association rules. The clustering technique of the active research topics mainly deals with analyzing spatial and attribute data. And, the technique of association rules deals with identifying frequent patterns. There was an advanced apriori algorithm using an existing bit-clustering algorithm. In an effort to identify an alternative algorithm to improve apriori, we investigated FP-Growth and discussed the possibility of adopting bit-clustering as the alternative method to solve the problems with FP-Growth. FP-Growth using bit-clustering demonstrated better performance than the existing method. We used chess data in our experiments. Chess data were used in the pattern mining evaluation. We made a creation of FP-Tree with different minimum support values. In the case of high minimum support values, similar results that the existing techniques demonstrated were obtained. In other cases, however, the performance of the technique proposed in this paper showed better results in comparison with the existing technique. As a result, the technique proposed in this paper was considered to lead to higher performance. In addition, the method to apply bit-clustering to GML data was proposed.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.40 no.6
• /
• pp.684-696
• /
• 1995

A mutant for chalky endosperm and genetic male sterility (GMS) was newly developed in rice. The two characters were found to be controlled by single recessive gene which has pleiotropic effect, indicating that chalky seeds should be GMS seeds in segregating populations. Chalky seeds showed the same shape and size as normal seeds. However, starch composition of central part of endosperm was looser and shape of starch granules was rounder compared with normal endosperm, resulting in significantly lower grain weight, absolute density and grain hardness in chalky grains than in normal ones. Amylose content and gel consistency of chalky grains were much lower and harder, respectively. Male sterile plants showed much shorter plant height, poorer panicle exsertion and lesser panicle number compared with normal plants. Microspore abortion stage in pollen developmental process was observed as before meiosis. Male sterility of the mutant was stable regadless of temperature and day length. A system breeding hybrid rice using this mutant was discussed, comp ring with other systems utilizing cytoplasmic-genic male sterility(CGMS) and environment sensitive GMS(EGMS). Separation of GMS seeds in mixed seed bulks by specific gravity (1.14∼1.16g / cm3) was successful about 85∼90%. But some mixed normal plants were seemed to be easily removed by the apparent difference in growth characters at seedling stage. The highest natural outcrossing rate of this GMS line was as 17.3 % in a plot treated with 2-row pollinator, I-row GMS, and GA3 + cutting of flag leaf + pollen-scattering by rope.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.61 no.3
• /
• pp.153-162
• /
• 2016

We investigated the physicochemical properties and starch structure of various rice varieties including 15 colored cultivars. NKHC showed the highest level of protein, lipid, and total dietary fiber levels. Reddish brown rice showed higher lipid content than that in black rice cultivars. Apparent amylose content of waxy and non-waxy colored rice varieties was within the range of 3~5% and 15~18%, respectively. IP exhibited the highest total starch (TS) content, whereas, NKHC and HJJ showed lower TS content than that in other cultivars. Pasting temperature of all colored rice cultivars, except IP, was about $68^{\circ}C$. Peak viscosity of IP, JJJ, Hong, and GGHM showed high values of 138, 130, 128, and 124, respectively. All the colored rice cultivars presented A-type X-ray diffraction pattern and polygonal shapes of starch granules were observed using scanning electron micrographs (SEM). Major groups of amylopectin chain lengths were B (12 < DP ${\leq}$ 24) and A (DP ${\leq}$ 12). SMHC showed the highest B chain content and the lowest A chain content (P < 0.05). These experimental results provided useful information for scientists and the food industry regarding colored rice starches.