Polystyrene (PS) particles containing the phase change material (PCM) were synthesized by miniemulsion polymerization. The polymer particles prepared with different parameters were investigated in terms of average particle size, particle distribution, and latent heat storage of encapsulated paraffin wax (PW) as PCM. The morphology and particle features of PS particles were analyzed by scanning electron microscope and particle size analyzer, respectively. As a result, the diameters of PS particles were adjusted with manufacturing conditions. The stable and spherical PS particles of nanosize were obtained by miniemulsion polymerization, which could be attributed to the prevention of Ostwald ripening by cosurfactant. Thermal properties of PS particle containing PCM were studied by differential scanning calorimetry. From DSC freeze-thaw cycle, PCM coated with PS exhibited the thermal energy storage and release behaviors, and the latent heat was found to be a maximum 145 J/g. It was noted that PS particles containing PCM showed a good potential as a thermal energy storage medium.
The production of fine metal oxide particles in supercritical water has been studied. Cobalt nitrate solution and manganese nitrate solution have been selected as model solutions for metal salt aqueous solution and the particles of cobalt oxide and manganese oxide have been produced. It was observed that the production of fine metal oxide particles in supercritical water was feasible and the dehydration rate was remarkably high in supercritical water. In spite of a short residence time (3~100 seconds), fine particles ($0.5{\sim}2{\mu}m$) have been produced. In the supercritical water process, the temperature of mixer had a significant effect on particle size and size distribution. It was observed that a change in reaction temperature resulted in the control of particle size.
In this study, we have for the first time applied fractional precipitation with hydrophilic polymer in order to decrease the particle size of the anticancer agent paclitaxel from plant cell cultures. When compared with the case where no hydrophilic polymer was employed, the addition of hydrophilic polymer in fractional precipitation resulted in a decrease in the size of the paclitaxel precipitate. Among the polymers used, HPMC 2910 was the most effective for inhibition of precipitate growth. A polymer concentration of 0.2% (w/v) obtained the smallest particle size. The particle size was reduced by ~35% compared to control. In addition, the precipitate size was inversely correlated with the absolute value of the zeta potential.
Primer gunsot residues (GSR) obtained from K1A and K2 rifles, and K5 pistol were analysed with scanning electron microscopy/energy dispersive X-ray spectrometry (SEM-EDX) as basic data in firearm accidents. Ammunition of 5.56 mm is employed for K1A and K2 rifles and 9.0 mm for a K5 pistol. The analyses of morphology, size, particle number, elemental ratio were performed for primer GSR prepared after shooting 3 times. The detected content was Ba>Pb>Sb in most GSR particles but Sb>Pb>Ba or Pb>Sb>Ba in some particles. In the statistical result of composition ratio of elements, the particles with more Sb than Ba were detected in most primer GSR from a K5 pistol, 3~8 times more than K1A and K2 rifles. This results can be employed to discriminate gun type between rifles and pistols. Furthermore, the size and the number of particles can be applied to access the type of guns.
Proceedings of the Korean Vacuum Society Conference
/
2010.02a
/
pp.338-338
/
2010
공정 중 발생하는 입자는 반도체 생산 수율에 가장 큰 영향을 끼치는 원인으로 파악되며, 생산 수율을 저하시키는 원인 중 70% 가량이 이와 관련된 것으로 알려져 있다. 현재 반도체 공정에서 입자를 계측하는데 사용하는 PWP (Particle per Wafer Pass) 방법은 표준 측정방법으로 널리 쓰이고 있으나, 실시간으로 입자의 양을 측정할 수 없고, Test wafer 사용에 따른 비용증가의 단점이 있어 공정 중에 입자를 실시간으로 측정할 수 있는 대안기술이 필요한 실정이다. ISPM (In-Situ Particle Monitoring)은 레이저 산란방식을 이용한 실시간 입자측정 장비로서 오염원 발생에 대한 즉각적인 대처와 조치가 가능하고 부가적인 추가 비용이 발생하지 않기 때문에 실시간 모니터링 장비가 없는 현재의 반도체 공정에 충분히 적용될 가능성이 있다. 특히 CVD 공정은 반도체 공정의 약 30%를 차지할 만큼 중요한 단계로 생성되는 오염입자 모니터링을 통해 공정 불량 유무를 판단할 수 있을 것으로 기대된다. 본 연구에서는 Silane 가스를 이용한 PECVD (Plasma Enhanced Chemical Vapor Deposition) 공정 중 발생되는 오염입자를 ISPM을 이용하여 실시간으로 측정하였다. 챔버 배기구에 두 가지 타입의 ISPM을 설치하고 공정압력, 유량, 플라즈마 파워를 공정변수로 하여 각각의 조건에서 발생되는 오염입자의 분포 변화를 실시간으로 측정하였으며 결과를 비교 분석하였다.
Journal of the Korean Society of Fisheries and Ocean Technology
/
v.31
no.3
/
pp.296-305
/
1995
A numerical study was undertaken to clarify the mechanisms of heat transfer in fluid-particle suspension flows. Such flows, including fluidization, are of considerable industrial importance. The present study uses 2-D numerical computations of collisions of normal incidence between a particle and a wall. By comparing the results using (a) adiabatic boundary conditions on the particle and (b) uniform, elevated temperature conditions on the particle, the contributions of fluid-mediated conduction and particle induced convection were successfully separated. Computational expedience led to the use of a transient conduction thermal layer as the background thermal field for the analysis. The results shows that the effect of particle movement is very small until the particle reaches a distance of one to one half diameter away from the wall. The gas-mediated conduction effect is dominant over the induced gas convection effect when Pe is small and the induced gas convection effect becomes significant as Pe increases.
Journal of the Korean Society of Propulsion Engineers
/
v.21
no.4
/
pp.96-106
/
2017
In pressable polymer bonded explosives (PBXs), densification occurs due to rearrangement and deformation of explosive particles during pressing. If brittle explosives are compressed till particle fraction become higher than theoretical random close packing fraction (RCPF), bigger particles should be fractured to fill the void. In this study, multi-modal particle system was introduced for the decrease in possibility of particle fracture during compression expecting decrease in shock sensitivity of highly filled pressable PBX. The experimental results showed the trimodal particle system had low sensitivity with high density, compared to bimodal particle system.
다환방향족탄화수소류 화합물의 증기상-입자상간의 분배평형의 설명을 위해 흔히 입자상의 흡착지점이 균질하고 총흡착면적은 TSP에 비례한다는 가정을 사용하는데 본 연구의 목적은 이러한 가정의 타당성을 평가하는 것이다. 본 연구를 위해 도심에서 6단의 다단계 대기중입자채집기를 사용하여 대기 중의 입자를 포집하였으며 이들 입자에 흡착된 phenanthrene, anthracene, fluoranthene, pyrene을 분석하여 입경별 분포를 측정하였다. 특히 연구기간 중에 황사현상이 일어나 입경분포나 입자의 기원이 매우 다른 경우에 대한 연구가 가능하였다. 주요연구결과로서 우선 야마사키가 제안한 분배평형의 온도 의존식은 제한된 범위에서 사용되어야 한다는 것이 관측되었다. 즉, 황사현상이 일어나는 경우와 같이 입자의 흡착특성과 입경분포가 보통때와 다른 경우에는 log Kp와 l/T의 관계에서 선형성이 상당히 저하되었다. 또한 특히 낮은 온도에서는 입자의 입경분포가 달라지면 전체적인 분배평형이 달라지게 되는 것으로 평가되었으며 입자의 흡착특성도 분배평형의 온도의존성에 결정적인 영향을 줄 수 있는 것으로 나타났다. 따라서 입자의 기원이 다양하거나 입경분포가 달라지면 흡착평형이 바뀌기 때문에 흡착특성의 균질성과 단순한 TSP를 전제로 하는 분배평형의 평가나 예측은 실제 대기조건에서는 정확하지 않을 수가 있으며 제한적인 조건에서 사용되어야 할 것이다.
Proceedings of the Korean Vacuum Society Conference
/
2016.02a
/
pp.359.2-359.2
/
2016
붕소의 높은 융점과 비점으로 인하여 일반적인 합성법으로는 제조가 어려운 붕화금속 나노물질을 효과적으로 합성하기 위하여 열플라즈마의 특성을 전산해석 하였다. RF (Ratio Frequency, 고주파) 열플라즈마 발생기는 일반적인 직류 열플라즈마 발생기와 비교해 볼 때, 전극 침식에 의한 수명 문제나 불순물의 오염 없이 고온의 열플라즈마를 안정적으로 발생시킬 수 있기 때문에 고순도의 나노입자 합성공정에 좋은 조건을 가지고 있다. 그러나 열플라즈마의 고온 부분은 10,000 K 이상의 높은 온도를 가지고 있기 때문에 직접적인 측정으로는 나노입자 합성에 최적의 조건을 찾기가 어렵고, 전산해석을 통하여 여러 변수들에 대한 열플라즈마의 특성을 분석하여야 한다. 해석조건으로 RF 플라즈마의 입력전력은 25 kW로 고정하고 발생기 직경 20~35 mm, 유도코일 감은 수 4~6 회, 첫 번째 코일으로 부터 분말 주입구까지의 길이 10~30 mm, 방전 기체 유량 30~70 L/min에 대한 변수들에 대하여 붕화금속 나노입자 합성에 최적의 조건을 가진 RF 플라즈마의 온도 및 속도분포를 파악하였다. 전산모사 결과 RF 열플라즈마 발생기의 직경 25 mm, 분말주입구 까지의 길이 10 mm, 유도코일 감은 수 6 회, 방전 기체 유량 50 L/min 일 때, 고온영역이 중심부에 넓게 분포하여 붕화금속 나노입자를 합성하는데 최적의 조건이라 파악되었다. 방전 기체 유량 증가에 따라 고온영역의 중심부 분포를 넓게 할 수 있었으나 유량이 증가할수록 플라즈마 속도가 증가하여 붕소를 기화시키기 위한 가열시간이 짧아지므로 방전기체 유량을 조절하여 적절한 속도를 가진 플라즈마를 발생시켜야 한다. 그리고 코일의 감은 수가 증가할수록 10,000 K 이상 고온영역이 출구 쪽으로 확장되어 붕화금속 나노입자를 합성하는데 좋은 조건이 형성되었다. 본 전산해석 결과를 바탕으로 붕화금속 나노입자를 합성하는 RF 플라즈마 발생장치의 설계 및 운전조건을 적용하여 실험과의 비교연구를 통해 붕화금속 나노입자의 합성공정을 최적화 시킬 수 있다.
Transactions of the Korean Society of Mechanical Engineers B
/
v.41
no.4
/
pp.239-248
/
2017
It is important to understand the dispersion and deposition characteristics of particles in the flow around a circular cylinder. The rotation of a cylinder is considered as a means to modify the particle deposition in this study. We numerically investigate the effects of the rotational speed of a cylinder and the particle Stokes number on particle dispersion and deposition as well as flow characteristics. Results show that the deposition efficiency of small particles (with the Stokes number smaller than 4) decreases significantly as the rotational speed increases. However, when the Stokes number is larger than 4, the deposition efficiency increases slightly with the rotational speed of the cylinder. Meanwhile, for a given rotational speed, the increase in the Stokes number leads to an increase in deposition efficiency and deposited area.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.