• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 2002.11a
• /
• pp.320-321
• /
• 2002

가상임펙터(virtual impactor)는 충돌판을 가지고 있는 관성임팩터(inertial impactor)와는 다르게 분리입경보다 큰 입자를 분리할 수 있는 부 유동과 분리입경보다 작은 입자를 분리할 수 있는 주 유동으로 나누어져서 입자의 튀김(bouncing)이나 재비산(reentrainment) 없이 입자를 분리 또는 농축할 수 있다. 하지만 관성임팩터처럼 여러 단을 연결하여 작은 입자를 분리할 수 없기 때문에 주로 큰 입자의 분리 및 농축에 쓰여왔다. (중략)

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.13 no.6
• /
• pp.304-308
• /
• 2003

By controlling the internal pressure in the cyclone separator, we investigated the separation charateristics of $Al_2O_3$, $Fe_2O_3$ particles with the internal pressure variation. 3-dimensional Langrangian approach was applied for the analysis of the particles separation, and then the minimum cut diameter of the separated particles and the separation rate were calculated through tracking the particle trajectories. The density of the argon gas for transporting particles was decreased corresponding the pressure decrease, consequently, caused the internal pressure drop in the cyclone separator. For that reason the finer particles were separated as the pressure was changed from an atmospheric pressure to an low pressure. Specifically, at 50 torr pressure, $Al_2O_3$ particles of the size of about 4 $\mu\textrm{m}$ and $Fe_2O_3$particles of about 3 $\mu\textrm{m}$ could be separated.

• The Journal of the Acoustical Society of Korea
• /
• v.35 no.6
• /
• pp.445-451
• /
• 2016

It is very important to obtain non-agglomerated nano particle state for practical application of nano technology. In order to improve the functionality of products using nano particles, more precise control of particle size distribution is required in their synthesis process. However, synthesized nano particles are agglomerated easily due to physical and chemical reasons, and it then veils unique properties of the nano particles and causes some troubles in their practical application. In this study, a separation method for nano particles from suspension by using the droplets as the separation space was proposed. Using the suspension of 0.002 wt. % with $TiO_2$ powder, the particle size distribution of nano particles in the recollected suspension was measured. From the results, it was confirmed that it is possible to separate and to recollect the nano particles monodispersed by using the suggested method.

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 2003.11a
• /
• pp.483-484
• /
• 2003

일반적으로 싸이클론은 여러 산업공정에서 입자의 분리/제어를 위해서나 대기 중의 입자상 물질을 측정하기 위해서 많이 쓰여 왔다. 하지만 싸이클론은 작은 입자에 대해서는 효율이 낮고, 완만한 포집 효율 곡선을 가지고 있기 때문에, 고효율을 얻거나 이상적인 효율 곡선을 얻는 방법에 대해서 많은 연구가 집중되었다. 최근에는 입자를 분리/포집하기 위해서 싸이클론을 사용하는 것뿐만 아니라, 일정 크기의 입자를 분리하고 농축하기 위해서 가상 싸이클론(virtual cyclone)을 사용하는 연구가 진행되고 있다. (중략)

• Korean Chemical Engineering Research
• /
• v.47 no.2
• /
• pp.195-202
• /
• 2009

As a basic research of developing two-interconnected fluidized beds system for selective solid circulation, a solid separator was developed to separate fine and coarse particles by means of particle size difference with particle size separation system equipped with metal screen. The effects of gas velocity, height of solid separator, and separation area on the solid separation rate were investigated as well. The solid separation rate increased as the gas velocity, height of solid separator, and separation area increased. As the gas velocity and height of the solid separator increased, the variation of the solid separation rate was consistent with that of bubble size. Consequently, coarse($212{\sim}300{\mu}m$) and fine($63{\sim}106{\mu}m$) particles were separated using the solid separator and the solid separation rate was ranged from 4.4 to 127 g/min. We also proposed two interconnenced fluidized beds system for sorption enhanced water-gas shift process equipped with the developed solid separator.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.33 no.8
• /
• pp.1359-1366
• /
• 2004

Ultra high temperature treated (UHT) skim milk and colloidal calcium phosphate-free skim milk were treated with microbial transglutaminase (TGase), ultracentrifuged at various rates, lyophilized, and observed for morphological properties with a scanning electron microscope (SEM). UHT skim milk showed small holes of associated micelles at lower centrifugal rates, and became thick and irregular, and fine particles were associated regularly at higher centrifugal rates. When UHT skim milk with TGase was incubated for 1 hour, casein micelles aggregated and broadened as centrifugation rate increased. When UHT skim milk with TGase was incubated for 8 hours, casein micelles were associated irregularly to large aggregates and widened. Colloidal calcium phosphate-free skim milk with TGase incubated for 1 hour and separated by two-step centrifugation showed aggregated lump, while the milk incubated for 8 hours with TGase was associated with broadened, compact, and regular layers as the centrifugation rate increased. Such phenomena were caused by heat treatment, protein crosslinking reaction catalyzed by TGase and conformational changes of casein molecules, and could be dependent on reaction time, temperature and ultracentrifugation rate.

• Resources Recycling
• /
• v.6 no.1
• /
• pp.17-22
• /
• 1997

An electromagnetic fluidized bed was proposed for the continuous separation of magnetic particles from the fine a admixtures with nonHmagnetic particles. The effects of operating variables on the magnetic fraction in the separated p particles were examined, including superficial gas velocity, mixing fraction of magnetic particles (= 100-mixing fraction of n non-magnetic particles) in the admixture, and electric current supplied to the electwmagnet. It was found that the s separation was possible when a magnetic force formed by the electromagnets works on the magnetic particles over the hydrodynamic force caused by a gas stream for fluidizing the fine admixture.

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 2000.11a
• /
• pp.326-327
• /
• 2000

May(1945)에 의하여 임팩터가 개발된 이후 임팩터의 단별 분리입경의 정확성을 증가시키고, 기판에서 입자의 채취량을 늘리며, 임팩터 내부의 입자손실과 기판에서 입자가 충돌하여 튀어나오는 것(bounce)을 줄일 수 있는 방법 등이 꾸준히 연구되고 있다. 가속 노즐의 형상을 사각형에서 원형으로 변경하여 분리효율곡선의 기울기(stiffness)를 증가시킬 수 있었고(Mitchell and Filcher, 1959), 임팩터의 한 단에 여러 개의 가속 노즐을 가공한 다중 노즐(multi-jet) 임팩터를 사용함으로써 단의 분리입경을 낮추고, 입자의 채취량을 늘릴 수 있게 되었다(Anderson, 1958). (중략)

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2003.04a
• /
• pp.409-412
• /
• 2003

본 연구는 호소내 오염된 퇴적물 처리를 위한 전처리 장치로 Hydrocyclone의 이용가능 성을 평가하는 실험이다. 외국의 선행 연구자인 Rietema의 표준 규격을 참고하여 제작된 Hydrocyclone을 이용하여 기흥저수지 퇴적물로 실험을 실시하였다. 실험결과 입자에 따른 오염 도 평가에서는 입자가 작을수록 포함된 오염물의 농도가 높은 것으로 나타났다. 또한 퇴적물을 이용한 장치특성 및 운전조건 변화에 따른 실험에서 공급속도가 빠르고, 공급시료의 농도가 낮으며, 장치의 크기가 작을수록 입자별 분리효율이 높았다.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.13 no.3
• /
• pp.145-151
• /
• 2003

Using computational fluid dynamics (CFD) method, we investigated three-dimensional fluid flow field and particle movement with respect to the injected gas flow rate variation in typical cyclone separator system. The results of numerical investigation were deduced by coupling the analysis of fluid flow field with Wavier-stokes equation and the tracking of the particle trajectory with Langrangian approach. It was shown that the increasing of injected gas flow rate resulted in the increasing of pressure loss in the separator. This change of inner pressure had an effect on an aspect of the fluid flow in the separator. Particle movement was determined by fluid flow in the separator and was fully depended on a diameter of particles under the fixed flow rate. Increasing of injected gas flow rate was led to an increasing of the trace of particle, so the particles moved to the lower part of the separator. For this reason, the minimum diameters of the particles were decreased and increased the separation rate under the fixed particle diameter. In conclusion, the changes of injected gas flow rate have an important factor to the fluctuation of the fluid flow field and particle trajectory in the separator.