• Transactions of the Korean hydrogen and new energy society
• /
• v.11 no.3
• /
• pp.119-125
• /
• 2000

To improve the photochemical energy conversion efficiency and the stability of CdS particulate film electrode which is used to produce hydrogen from the aqueous $H_2S$ solution photoelectrochemically, surface treatment of this film was carried out using $TiCl_4$ solution. CdS particles for preparation of the films were synthesized by precipitation reaction of $Cd({NO_3})_2{\cdot}9H_2O$ and $Na_2S{\cdot}4H_2O$. Then, the CdS sol was hydrothermally treated for 12hr in an autoclave with the variation of treatment temperature to control the crystalline phase of particles. CdS film electrode was thus prepared by annealing at $400^{\circ}C$ for 12hr of the wet-film cast at room temperature, and subsequently surface treated with $TiCl_4$ solution. The electrodes were characterized using XRD, SEM, and the photocurrent meter. The photocurrents of Cds film electrodes prepared with surface treatment were up to two times higher than the electrodes without surface treatment, indicating about $4.0mA/cm^2$. Hydrogen production rate in a continuous flow system using photoelectrochemical or photochemical cells prepared with surface treatment also increased in proportion to the increase of photocurrents.

• Korean Journal of Materials Research
• /
• v.5 no.8
• /
• pp.953-959
• /
• 1995

It was investigated that reinforced species, billet condition and extrusion variation in Al 6061 composite material effected on extrusion process of particulate reinforced composite material. The strength of composite material with reinforcement species revealed SiC$\sub$w/> A1$_2$O$\sub$3f/ > A1$_2$O$\sub$3f/ > A1$_2$O$\sub$3f/ orderly. K$\sub$w/ increased as volute fraction increased in all composite material. The composite materials reinforced by A1$_2$ $O_3$required the larger pressure in hot extrusion process than those by SiC$\sub$p/ at all condition. Extrusion process tended to decrease as the semi-angle of extrusion dies increased because larger contact area caused larger shear friction. Extrusion temperature went up about 50$^{\circ}C$ in low elevated deformation temperature. In extrusion temperature above 500$^{\circ}C$, severe tearing occurred on extrusion surface. More reinforcement in volume fraction, more hot tearing.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.26 no.3
• /
• pp.279-287
• /
• 1993

Daily variation of particulate organic carbon(POC) and some factors controlling its level were examined for a semi-enclosed bay(Wonmun Bay, south coast of Korea), in which a lot of suspended oyster culture farms existed, in September, 1992. Observations were made at hourly interval. In spite of the relatively short survey period, strong short-term variation of POC concentration could be observed. Concentrations of POC were the range of $58{\sim}582{\mu}g/l(average 272{\mu}g/l)$ and their variation pattern was similar to those of chlorophyll a with the range of $0.90{\sim}7.25{\mu}g/l(average 3.35{\mu}g/l)$. The low C/N ratios also suggested that marine microalgae was a major component of POC for Wonmun Bay. Primary production, average $1.97\;gC/m^2/day$, was the main source of POC beacuse the supply of POC via freshwater input and exchange with the outer part of the bay was little. Oyster population also excreted a small amount of POC. About $40\%$ of produced POC was decomposed heterotrophically. Another important cause for the fluctuation of observed POC was tidal cycle. Considerable POC, which amounted $37\%$ of produced POC, was lost from the bay due to flushing by tidal cycle. It was also calculated that about $16\%$ was transported onto the sediment. It seemed that a part of POC was consumed by oyster and other heterotrophs.

• Tribology and Lubricants
• /
• v.25 no.6
• /
• pp.404-408
• /
• 2009

In this paper, the relationship between the material removal rate and the interfacial mechanical properties at particle-surface contact situation, which can be seen in an abrasive machining process using micro/nano-sized particles, was discussed. Friction and stiffnesses were measured experimentally on an atomic force microscope (AFM) by using colloidal probes which have a silica colloid particle in place of tip to simulate a particle-flat surface contact in an abrasive machining process. From the experimental investigation and theoretical contact analysis, the interfacial contact properties such as lateral stiffness of contact, friction, the material removal rate were presented with respect to some of material surfaces and the relationship between the properties as well.

• Journal of The Korean Association For Science Education
• /
• v.25 no.7
• /
• pp.721-727
• /
• 2005

This study investigated the effects of small group drawing in learning the concepts of particulate nature of matter. Three classes of seventh graders (N = 126) at a coed middle school were randomly assigned to a pair drawing group, an individualistic drawing group, and a control group. The students were taught the 'three states of matter' and 'motion of molecules' for eight class periods. Prior to these classes, student self-efficacy, learning motivation, and attitude toward science instruction were examined. After instruction, tests assessing achievement, conception, learning motivation, and attitude toward science instruction were administered. Two-way ANCOVA results revealed that scores of achievement and conception for the pair drawing group were significantly higher than those for the control group. However, scores of the three groups did not significantly differ in learning motivation and attitude toward science instruction. Furthermore, no significant interactions surfaced between instruction and the level of self-efficacy in all dependent variables.

• Journal of The Korean Association For Science Education
• /
• v.18 no.3
• /
• pp.337-345
• /
• 1998

This study examined the influences of computer-assisted instruction(CAl) upon high school students' conceptual understanding, algorithmic problem solving ability, learning motivation, and attitudes toward chemistry instruction. CAl programs were designed to supply animated molecular motions for emphasizing the particulate dynamic nature of matter and immediate feedbacks according to students' response types at each stage of four stage problem-solving strategy(understanding, planning, solving, and reviewing). The CAl and control groups (2 classes) were selected from a girls high school in Seoul, and taught about gas law for four class hours. Data analysis indicated that the students at the CAl group scored significantly higher than those at the control group in the tests on conceptual understanding and algorithmic problem solving ability. In addition, the students at the CAl group performed significantly better in the tests on the learning motivation and attitudes toward chemistry instruction.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.15 no.6
• /
• pp.144-150
• /
• 2007

In recent years, the particle number emissions rather than particulate mass emissions in automotive engine have become the subject of controversial discussions. Recent results from the health effects studies imply that it is possible that particulate mass does not properly correlated with the variety of health effects attributed to diesel exhaust. So, the concern is instead now focusing on nano-sized particles emitted from I. C. engine. This study has been performed for the better understanding about the engine nano-particle for 3-measurement systems with different measuring principle. Firstly, EEPS is a newly introduced instrument for size distribution measurement of engine exhaust particles. It can measure nano-particles with an adequate resolution and in real time. In this study, the characteristics of EEPS were compared with ELPI and SMPS. As a research results, EEPS showed a same effect of engine load on the size distribution with ELPI and SMPS. But the quantitative results of EEPS were more similar to SMPS than ELPI, because the EEPS and SMPS use a same principle for classifying particles by size. The capability for transient measurement of EEPS was equivalent to that of ELPI.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.37 no.1
• /
• pp.77-82
• /
• 2013

A cyclone separator has been widely used in various industrial processes for removing fine particulate matter because it is easy to fabricate, cost effective, and adaptable to extremely harsh conditions. However, owing to the complex flow field in cyclones, a complete understanding of the detailed mechanisms of particulate removal has not yet been gained. In this study, a theoretical analysis was performed for calculating the collection efficiency and cut-off size in cyclones by taking into account the effects of geometrical and flow parameters. The collection efficiency and cut-off size values predicted by the theoretical model showed good agreement with experimental measurements for particles with a diameter of $0.5-30{\mu}m$. It was also revealed that the surface friction, along with the flow and geometrical parameters, has a significant effect on the cyclone performance.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.3
• /
• pp.679-686
• /
• 2018

A new dust cleaning vehicle is needed to remove fine and ultra-fine particulate matter in subway tunnels. Therefore, the recently developed tunnel cleaning vehicle is equipped with an efficient suction system and cyclone-based prefilter to handle ultra-fine particles. To treat various sizes of particulate matter with an underbody suction system, this paper proposes a cyclone-based prefilter in the suction system and validates the dust removal efficiency through Computational Fluid Dynamics (CFD) analysis using ANSYS FLUENT. Using the created surface and volume mesh, various particle sizes, materials, and fan flow rates, the particles were tracked in the flow with a discrete phase model. As a result, the dust cleaning vehicle at a normal operational speed of 5km/h requires at least a fan flow rate of $1500m^3/min$ and 100mm of suction inlet height from the tunnel track floor. Those suction modules and cyclone-based prefilters in the dust cleaning vehicle reduces the dust accumulation load of the electric precipitator and helps remove the accumulated fine and ultra-fine dust in the subway tunnel.

• Journal of The Korean Association For Science Education
• /
• v.40 no.4
• /
• pp.375-383
• /
• 2020

In this study, we investigated the effects of the multiple representation-based learning strategies using augmented reality in terms of students' conceptual understanding, achievement, and enjoyment of science lessons. 136 8^th-grade students in a coed middle school were randomly assigned to the treatment and the control group. The students learned the concept of the particulate nature of matter related to the properties of substances for four class periods. The multiple representation-based learning strategies designed to facilitate the connecting and integrating representations provided from augmented reality were developed and administered to the students of the treatment group. Results of two-way ANCOVA revealed that the scores of a conceptions test and enjoyment of science lessons test of the treatment group were significantly higher than those of the control group, regardless of their prior science achievement. In a conceptions test, there was a significant difference in the concept of preservation of particles. However, the difference was not statistically significant in the concept of distribution and motion of particles. In terms of an achievement test, there was a significant interaction effect by their prior science achievement. The scores of low-level students were significantly improved, but the effects were not significant to high-level students. On the bases of the results, educational implications for effective teaching and learning using augmented reality are discussed.