Analysis of Diesel Nano-particle Number Distribution Characteristics for Three Different Particle Measurement Systems

3개 입자측정스시템별 디젤 극미세입자의 수량분포 특성 비교

  • Lee, Jin-Wook (Engine R&D Center, Korea Institute of Machinery and Materials) ;
  • Kim, Hong-Suk (Center for Environmentally Friendly Vehicle, Korea Institute of Machinery and Materials) ;
  • Cho, Gyu-Baek (Engine R&D Center, Korea Institute of Machinery and Materials) ;
  • Jeong, Young-Il (Center for Environmentally Friendly Vehicle, Korea Institute of Machinery and Materials)
  • 이진욱 (한국기계연구원 친환경엔진연구센터) ;
  • 김홍석 (한국기계연구원 무.저공해자동차사업단) ;
  • 조규백 (한국기계연구원 친환경엔진연구센터) ;
  • 정용일 (한국기계연구원 무.저공해자동차사업단)
  • Published : 2007.11.01

Abstract

In recent years, the particle number emissions rather than particulate mass emissions in automotive engine have become the subject of controversial discussions. Recent results from the health effects studies imply that it is possible that particulate mass does not properly correlated with the variety of health effects attributed to diesel exhaust. So, the concern is instead now focusing on nano-sized particles emitted from I. C. engine. This study has been performed for the better understanding about the engine nano-particle for 3-measurement systems with different measuring principle. Firstly, EEPS is a newly introduced instrument for size distribution measurement of engine exhaust particles. It can measure nano-particles with an adequate resolution and in real time. In this study, the characteristics of EEPS were compared with ELPI and SMPS. As a research results, EEPS showed a same effect of engine load on the size distribution with ELPI and SMPS. But the quantitative results of EEPS were more similar to SMPS than ELPI, because the EEPS and SMPS use a same principle for classifying particles by size. The capability for transient measurement of EEPS was equivalent to that of ELPI.

Keywords

References

  1. A. Mayer, L. Hofer, J. Schlatter, H. Burtscher and J. Czerwinski, 'Health Effects, Measurement and Filtration of Solid Particles Emitted from Diesel Engines,' Technical Report of GRPE-PMP, pp.6-13, 2001
  2. D. B. Kittelson, 'Engines and Nanoparticles: a Review,' J. Aerosol Sci. Vol.29, No.5/6, pp.575- 588, 1998 https://doi.org/10.1016/S0021-8502(97)10037-4
  3. H. S. Kim, S. S. Lee, G. B. Lee, N. W. Sung and Y. I. Jeong, 'The Characteristics of ELPI and SMPS on the Measurement of Diesel Particles,' Fall Conference Proceedings, Vol.I, KSAE, pp.285-291, 2003
  4. H. S. Kim, S. S. Lee, G. B. Lee, N. W. Sung and Y. I. Jeong, 'The Effect of Dilution Method and Measuring Positions on the Measurement of PM Size Distribution in a Diesel Engine,' Fall Conference Proceedings, Vol.I, KSAE, pp.297-301, 2003
  5. C. V. Gulijk, J. C. Marijnissen, M. Makkee and J. A. Moulijn, 'The Choice of Instrument (ELPI and/or SMPS) for Diesel Soot Particulrate Measurements,' SAE 2003-01-0784, 2003
  6. J. Pagan, 'Study of Particle Size Distributions Emitted by a Diesel Engine,' SAE 1999-01- 1141, 1999
  7. http://www.tsi.com/particle/products/partsize/3090.htm
  8. http://www.grimm-aerosol.de/
  9. M. Hosoya, S. Shundo and M. Shimoda, 'The Study of Particle Number Reduction Using After-Treatment Systems for a Heavy-Duty Diesel Engine,' SAE 2004-01-1423, 2004