• Journal of Korean Society of Environmental Engineers
• /
• v.31 no.12
• /
• pp.1143-1150
• /
• 2009

This study was carried out to investigate of aerobic granulation by using sequencing batch reactor(SBR). To make aerobic granular sludge in short period of time, we used polymer. In case of SBR, we have studied on physicochemical characteristics of particle size, settling velocity, surface charge, and specific oxygen utilization rate(SOUR) depending on aerobic particle's formation. The results of running SBR with $5.4kg{\cdot}COD/m^3{\cdot}d$ of COD loading rate and 20 days reaction time showed that aerobic particle size, settling velocity, SOUR, surface charge, polysaccharide/protein(PS/PN) ratio were 2.6 mm, 1.7 cm/s, $346mg{\cdot}O_2/g{\cdot}MLVSS{\cdot}hr,\;(-)0.26{\cdot}meq/g{\cdot}MLVSS$, and 2.06 mg/mg respectively.

• Journal of Korean Society of Environmental Engineers
• /
• v.33 no.4
• /
• pp.275-280
• /
• 2011

In the present work, the aerobic particle's characteristics were enhanced. A polymer was used to make aerobic granular sludge in short period of time. And operation parameters were calculated for organic matter removal in domestic wastewater using a sequencing batch reactor (SBR). The experiment for sewage (Influent concentration of 63~72 mg COD/L) by using mature aerobic granular sludge showed the organic matter removal rate k and oxygen utilization coefficient a', b' were $10.161d^{-1}$ and 0.87 mg $O_2/mg$ $COD_r$, 0.11 mg $O_2/mg$ MLVSS d respectively. Therefore, it was more effective than K value $5{\sim}8d^{-1}$ of conventional activated sludge process. The sludge synthetic value and sludge auto-oxydation value were 0.45 mg VSS/mg $COD_r$ and 0.05 mg VSS/mg MLVSS d respectively. Consequently, mortality rates of microorganisms was lower than conventional activated sludge process.

• Journal of the Korean Geotechnical Society
• /
• v.32 no.10
• /
• pp.31-40
• /
• 2016

In order to investigate the change in soil arch structure developed within the soil subjected to trapdoor movement, various responses in the deformed particle assembly were observed via photoelastic measurement technique. The particle assembly was composed of the regularly stacked model particles coated by thin photoelastic material. Variation of the internal structure transmitting contact forces were observed by taking images showing the photoelastic responses and compared with the change in slip lines and pressures measured by load cells placed beneath the assembly. Initial soil arch structure established immediately after the trapdoor movement collapsed progressively and meanwhile a new extended structure was developed against further movement of the trapdoor. For the sufficient movement of the trapdoor, initially identical regions bounded by the soil arch structure and slip lines were separated and the region enclosed by slip lines became a part of the region loosing the transmitting contact forces identified by photoelastic measurement.

• Korean Chemical Engineering Research
• /
• v.51 no.3
• /
• pp.352-357
• /
• 2013

In this study, the pellet-type adsorbents were prepared by extrusion using water treatment sludge. Effects of binder and calcination on physical and chemical properties of pellet-type adsorbents were investigated. The porous structure and surface characteristics of the adsorbents were studied using nitrogen adsorption, compression strength, scanning electron microscope, X-ray diffraction, and infrared spectroscopy of adsorbed pyridine. With increasing of binder content to 5 wt%, the compressive strength of pellet-type adsorbent could be improved more than three times, but the surface area reduced by 30%, and thus the breakthrough time of trimethylamine was shortened. The breakthrough time of the trimethylamine, a basic gas, could be increased more than three times through calcination, which seems to be due to generation of acid sites composed of Lewis acid and Br$\ddot{o}$nsted acid sites on the adsorbent surface.

• Proceedings of the Korean Society for Bio-Environment Control Conference
• /
• 1999.11a
• /
• pp.141-144
• /
• 1999

1970년대에 덴마크에서 원예용 배지로 암면을 사용한 이래 현재 암면은 채소 및 화훼류 양액재배에 있어서 가장 중요한 배지의 하나로 여겨지고 있다(Smith. 1996). 그러나, 이는 주로 판상암면을 의미하는 것으로 이와는 다른 형태인 입상암면은 고려되고 있지 않다. 입상암면은 판상암면과는 달리 입자형태를 하고 있기 때문에 판상암면보다 더 많은 공극을 확보할 수 있으며, 또한 입자내부에는 기존의판상암면과 같은 보습성을 지니고 있기 때문에 새로운 원예용 배지로서 대두되고 있다(Smith. 1996). (중략)

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2002.02a
• /
• pp.242-247
• /
• 2002

가. 느타리버섯 폐면 버섯퇴비를 종균과 혼합 입상하는 폐면입상기의 주요부위는 진동식 변량공급장치, 버킷엘리베이터 승강기, 승강식 수평 벨트콘베이어 수평이송장치로 구성되며, 통로가 좁은 생육분리형 재배사와 재래식 재배사에도 적응할 수 있도록 제작되었다. 나. 폐면 공급장치의 폐면 공급성능은 캠행정이 13mm로부터 16mm, 19mm로 커 질수록, 캠축의 회전수가 300rpm에서 700rpm으로 증가할수록 폐면의 공급성능은 높아지는 경향이었다. 다. 폐면 공급장치의 공급성능과 기체진동, 폐면 부착수준 등의 작업상태를 고려할 때 캠행정 16mm 회전수 550rpm 내외가 적당한 것으로 판단된다. 라. 시작기의 작업능률은 표준규격 200m$^3$인 버섯재배사 1동 1회당 14시간으로 관행(인력)작업의 50시간에 비해 3.5배 능률적이었다. 마. 버섯입상, 종균접종 작업경비는 1동 1회당 관행(인력)작업이 320,800원/200m$^3$.동에 비해 시작기는 130,300원/200m$^3$.동으로서 59,7%의 작업경비를 절감할 수 있는 것으로 분석되었다.

• Journal of Conservation Science
• /
• v.25 no.2
• /
• pp.179-196
• /
• 2009

The Gaetaesajiseokbulibsang (Treasure No. 219) consists of light gray and coarse to medium-grained granodiorite with feldspar phenocrysts in part. Magnetic susceptibility of the rock material was measured as 12.06(${\times}10^{-3}$ SI unit), being different from the granite($0.19{\times}10^{-3}$ SI unit) in the Mt. Cheonho. This indicates the raw material has been supplied from the outside. As a result of deterioration assessment, exfoliation of the Right Buddha, cement and dust of the Main Buddha were estimated as 35.2%, 21.1% and 25.0%. The ultrasonic velocity was measured as 2850.2m/s(Main Buddha), 2648.4m/s(Left Buddha) and 2644.5m/s(Right Buddha). The compressive strength calculated from the velocity showed low in the Right Buddha among three and the all pedestal parts which corresponds to the result of deterioration assessment. The indoor mean temperature and relative humidity of the shelter were $13.7^{\circ}C$ and 79.0%. It is evaluated that the indoor microclimate was stable and the shelter functioned to reduce climatic fluctuation of the outdoor. However, water condensation was occurred on the surface of the pedestal part during spring and summer, and freezing in winter season might also be done. These factors were probable to be a main cause of the surface exfoliation of the Triad Buddha Statues. Therefore, dehumidification and heating system in the shelter should be applied to prevent further deterioration.

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 2001.11a
• /
• pp.375-376
• /
• 2001

건축 기술의 발달과 도시토지 이용의 효율성을 강화하기 위하여 최근에는 초고층 건물이 많이 건설되고 있다. 이러한 초고층 건물은 에너지 절약적인 설계로 높은 기밀성을 가질 뿐 아니라, 외주부 또한 개폐할 수 없는 유리벽에 의하여 구획되므로 자연 환기에 열악한 특성을 지니고 있다. 초고층 건물의 경우 배기시스템으로 중앙집중배기방식을 채택하고 있으며, 중앙배기시스템은 배기입상덕트의 형상 및 규격, 흡출기의 성능, 그리고 기상조건 등 여러 변수들에 의해 영향을 받는다. (중략)

• 월간 기계설비
• /
• s.38
• /
• pp.105-113
• /
• 1993

• 베이커리
• /
• no.3 s.308
• /
• pp.120-122
• /
• 1994