• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.19 no.2
• /
• pp.331-337
• /
• 1994

The scatting problem by E-polarized plane wave with obique incidence on a tapered resistive strip grating with zero resistivity(perfectly conducting) at strip-edges is analyzed by the method of moments in the spectral domain. Then the induced surface current density on the strip is expanded in a series of Chebyshev polynomials of the second kind. The expasion coefficients are calculated numerically in the spectral domain, the numerical results of the geometric-optical reflection coefficient for the tapered resistivity in this paper are compared with those for the existing uniform resistivity. And the position of sharp variation points in the magnitude of the geometric-optical reflection coefficient can be moved by varying the incident angle and the strip spacing, It is found out that these sparp variation points are due to the transition of higher mode between the propagation mode and the evanescent mode.

• Proceedings of the KSME Conference
• /
• 2007.05b
• /
• pp.2591-2596
• /
• 2007

The effect of incidence angle on the three-dimensional flow and aerodynamic loss in the downstream region of a high-turning turbine rotor blade has been investigated with a straight miniature five-hole probe. The incidence angle is changed to be +10, +5, 0, -10, -20, -30 and -40 degrees. The results show that the positive incidence reinforces the three-dimensional vortical flows within the turbine passage including the passage vortex, but the negative incidence weaken them significantly. A small increment in the positive incidence angle results in a remarkable aerodynamic loss increase, while increasing the incidence angle in the negative range leads to a very small change in the aerodynamic loss.

• 한국공간정보시스템학회:학술대회논문집
• /
• 2005.05a
• /
• pp.267-272
• /
• 2005

최근 항공레이저스캐닝(ALS)은 높은 정확도와 경제성을 이유로 지형정보를 획득하는 탁월한 수단으로 주목받고 있다. ALS에 의해 수집되는 고도자료는 DSM, DEM 제작에 유용하게 이용된다. ALS는 고도자료 이외에 지표면의 물질적 특성을 나타내는 반사강도를 획득한다. 그러나 반사강도는 노이즈로 인해 널리 이용되지 못하고 있으며, 노이즈의 주원인은 반사각으로 알려져 있다. 따라서 본 연구는 센서 위치정보와 ALS 고도자료를 이용하여 반사각을 이용하여 반사강도를 보정하는 방법을 제안하였다 여기에는 ${\theta}$의 각도로 입사한 레이저의 강도는 수직으로 입사한 레이저의 강도보다 $sin{\theta}$만큼 감소한다는 물리학적 원리가 이용되었다 반사각은 지표면과 레이저가 이루는 각으로, 센서와 측정점 사이의 각과 지표면의 경사각의 두 단계로 나누었다. 방법의 적합 여부를 확인하기 위해 적외선 영역에서 분리도가 잘 이루어지는 아스팔트, 휴경지(토양), 콘크리트, 수목의 네 가지 검증영역을 선정하여 보정된 반사강도와 보정 전의 반사강도를 비교하였다. 모든 영역에서 반사강도가 증가하였으며 특히 콘크리트와 수목에서의 증가가 두드러졌다. 보정을 통해 네 영역에서 반사강도의 분리도가 향상됨을 물론 그 크기가 '아스팔트<토양<콘크리트<수목'으로 나타나는 이론적인 경향과 유사함을 확인할 수 있다.

• Proceedings of the Korea Contents Association Conference
• /
• 2014.11a
• /
• pp.221-222
• /
• 2014

최근 급격히 변해가는 기업 환경으로 인해 기업의 인재관이 많이 바뀌어졌는데 그 중에서 가장 두드러진 변화가 입사지원자의 실질적인 능력과 조직구성원으로서의 자질을 더욱 중시한다는 점이다. 자기소개서는 입사지원자의 내실을 평가할 수 있는 구체적인 자료가 될 수 있기 때문에 그 중요성은 매우 큰 비중을 차지하게 된다. 본 논문에서는 취업준비생들에게 자기소개서를 쓰는데 필요한 작성환경 및 템플릿을 제공할 웹 사이트를 구축함으로써 보다 쉽게 작성하게 되길 기대하고 있다.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.20 no.12
• /
• pp.1308-1315
• /
• 2009

A full-polarimetric scatterometer(HPS: Hongik Polarimetric Scatterometer) for X-band is designed, fabricated, and verified using the theoretically well-known point-targets in this paper. The X-band full-polarimetric scatterometer consists of an OMT(Orthogonal-Mode Transducer)+horn antenna, the angle control part for the OMT+horn antenna, a transmitter/receiver with a network analyzer and a frequency-conversion circuitry, and a movable support of these parts. We use an inclinometer sensor to control the vertical and horizontal incidence angles. The full polarimetric data can be obtained because of the polarization switches and the OMT. The accuracy of the scatterometer system is verified by measuring the polarimetric RCS(Radar Cross Section) of one of the theoretically well-known point-targets, i.e., a corner reflector.

• Journal of Korean Ophthalmic Optics Society
• /
• v.5 no.1
• /
• pp.13-18
• /
• 2000

In this paper, we use the C light which is a daylight and consider the incident beam having the Gaussian amplitude. We investigated the illuminance distributions and the variation in chromaticity of optical system having the truncated Gaussian amplitude on the focal plane and along the optical axis using the C light source. We also use the three sensitivity functions of human eye(CIE 1931) for wavelengths which are from 380nm to 780nm. When the truncation grade of incident beam having Gaussian amplitude decreases, the size of central spot on the focal plane and the depth of focus along the optical axis decrease, and the variation in chromaticity on the focal plane and along the axis increases rapidly. As the illuminance on the focal plane decreases the variation in chromaticity of optical system increases rapidly, and as the depth of focus increases the variation in chromaticity of optical system decreases.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.193.1-193.1
• /
• 2016

본 연구에서 개발된 새로운 유형의 마이크로파 대기압 플라즈마 공진기는 전송선로 이론을 기반으로 하여 임피던스 값을 $50{\varphi}$으로 설계함으로써 장비 자체에 구조적인 매칭이 이루어지도록 구성하였다. 안정적인 마이크로파 대기압 플라즈마 발생을 위해 컴퓨터 시뮬레이션(HFSS, High Frequency Structural Simulator)을 이용하여 공진기의 반사계수, 공명주파수, 급전점 그리고 전기장을 계산하였다. 전송선로의 이론에서 구한 급전점과 실제 제작한 마이크로파 대기압 플라즈마 공진기의 급전점 값이 큰 차이가 없음을 확인하였다. 이를 바탕으로 제작한 공진기는 급전점 5.6 mm에서 공명주파수는 0.89 GHz, 반사계수는 -37.5 dB임을 측정하였고 신호가 입사되는 정도는 90 % 이상인 것을 확인하였다. 공진기에서 발생된 플라즈마는 6 W의 정도의 저 전력으로 발생되었으며 기체유량과 인가전력에 따른 플라즈마의 기체온도를 측정하고 광 방출 특성을 고찰하였다. 실제 제작한 마이크로파 대기압 플라즈마 발생장치는 생의학적 응용을 포함한 여러 넓은 분야에서 활용될 전망이다.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.13 no.1
• /
• pp.73-79
• /
• 2001

In this study, a submerged plate-type breakwater is considered, which is supported by elastic foundation. This breakwater makes use of wave phase interaction among the incident, diffracted and radiated waves. We apply a three-dimensional singularity distribution method within the linear potential theory in order to describe the wave field. The submerged plate is assumed to be rigid and the elastic support be a linear spring with constant stiffness. A typical rectangle plate is exemplified for numerical calculation. The thickness of the plate is carefully selected in order to guarantee the solution to be stable by checking the condition number of the system matrix. A parametric study is carried out for examining the effect of the stiffness of the elastic support on performance of the breakwater. We also examine the effect of the submerged depth.

• The Journal of Korean Society for Radiation Therapy
• /
• v.21 no.1
• /
• pp.17-23
• /
• 2009

Purpose: In treating head and neck cancer, it is very important to irradiate uniform dose on the junction of the bilateral irradiation field of the upper head and neck and the anterior irradiation field of the lower neck. In order to improve dose distribution on the junction, this study attempted to correct non uniform dose resulting from under dose and over dose using the field-in-field technique in treating the anterior irradiation field of the lower neck and to apply the technique to the treatment of head and neck cancer through comparison with conventional treatment. Materials and Methods: In order to examine dose difference between the entry point and the exit point where beam diffusion happens in bilateral irradiation on the upper head and neck, we used an anthropomorphic phantom. Computer Tomography was applied to the anthropomorphic phantom, the dose of interest points was compared in radiation treatment planning, and it was corrected by calculating the dose ratio at the junction of the lower neck. Dose distribution on the junction of the irradiated field was determined by placing low-sensitivity film on the junction of the lower neck and measuring dose distribution on the conventional bilateral irradiation of the upper head and neck and on the anterior irradiation of the lower neck. In addition, using the field-in-field technique, which takes into account beam diffusion resulting from the bilateral irradiation of the upper head and neck, we measured difference in dose distribution on the junction in the anterior irradiation of the lower neck. In order to examine the dose at interest points on the junction, we compared and analyzed the change of dose at the interest points on the anthropomorphic phantom using a thermoluminescence dosimeter. Results: In case of dose sum with the bilateral irradiation of the upper head and neck when the field-in-field technique is applied to the junction of the lower neck in radiation treatment planning, The dose of under dose areas increased by 4.7~8.65%. The dose of over dose areas also decreased by 2.75~10.45%. Moreover, in the measurement using low-sensitivity film, the dose of under dose areas increased by 11.3%, and that of over dose areas decreased by 5.3%. In the measurement of interest point dose using a thermoluminescence dosimeter, the application of the field-in-field technique corrected under dose by minimum 7.5% and maximum 17.6%. Thus, with the technique, we could improve non.uniform dose distribution. Conclusion: By applying the field-in-field technique, which takes into account beam divergence in radiation treatment planning, we could reduce cold spots and hot spots through the correction of dose on the junction and, in particular, we could correct under dose at the entry point resulting from beam divergence. This study suggests that the clinical application of the field-in-field technique may reduce the risk of lymph node metastasis caused by under dose on the cervical lymph node.

• Proceedings of the Acoustical Society of Korea Conference
• /
• spring
• /
• pp.267-270
• /
• 2000

강제가진을 받는 진동장은 직접장과 반사장으로 이루어진다. 직접장은 무한구조요소가 점입력을 받을 때의 해와 같으며, 반사장은 직접장에 의해 발생되는 1차 반사파 및 추가로 발생하는 무수한 반사파들의 합으로 나타낼 수 있다. 본 논문에서는 점가진을 받는 유한한 평판의 단일 주파수 해석을 수행하기 위한 레이추적기법을 연구하였다. 이를 위해, 직접장은 고주파수 가정을 이용하여 원형전달파로 근사화하고. 이 원헝전달파를 다수의 파동관 (wave tube)으로 이산화하였다. 균일한 경계조건과 무시할 만큼의 미약한 굴절효과를 가정하고 경계에서의 정반사 (specular reflection)만을 고려하여, 경계에서의 입사파동관. 전달 및 반사파동관의 기하학적 관계를 제안하였다. 이들 파동관이 평판 내부를 진행하면서 관측점에 미치는 영향들을 합성하여 비교적 정확한 강제진동응답을 얻을 수 있음을 단일 평판의 예제를 통하여 확인할 수 있었다 그러나, 연성된 평판의 경우에는 다소 부정확한 결과를 얻었다.