• Journal of the Korean Society of Marine Environment & Safety
• /
• v.14 no.4
• /
• pp.247-256
• /
• 2008

For the systematic scientific management of tidal flat sediment in Julpo bay of Korea, this study conducted a survey of particle composition, organic matter(l.L) and heavy metals for three lines ; including F, R and L lines in tidal flat sediment. Particle composition of tidal flat sediments consisted predominantly of clay at F line which was in right angle direction to the coast, whereas R and L lines were located horizontally along the coast and consisted predominantly of silt. Mean grain size values of tidal flat sediments were in the range of 3.7 ${\phi}{\sim}$10.4 ${\phi}$(average 7${\phi}$). The contents of heavy metals observed at R and L lines were lower than those at F line. The correlation analysis among heavy metals, organic matter and particle size was found to have a good interrelationship. For the evaluation of heavy metals pollution, two criteria of US NOAA and KEI(in Korea) were applied Heavy metals pollution level of tidal flat sediments belonged in Non polluted and Moderately polluted groups in US EPA criteria, and its pollution levels sat below ERL in NOAA criteria. The results of heavy metals pollution level obtained by KEI criteria were found to be less than the goal level.

• Clean Technology
• /
• v.7 no.2
• /
• pp.109-117
• /
• 2001

Whereas commonly used to make concrete having rich water contents as binder or mineral admixture, blast furnace slag has been rarely applied to manufacture in concrete based products having poor water contents. This study, for the multi-recycling of blast furnace slag, is to analyze strength enhancement mechanism of concrete based products using blast furnace slag. The results of this study are following. We found that blast furnace slag is very effective mineral admixture to manufacture high strength spacer having over $400kgf/cm^2$ in compressive strength. Also, enhancement of strength by blast-furnace slag are responsible to densified grading and pozzolanic reaction.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.229-229
• /
• 2013

저온작동형($500{\sim}700^{\circ}$) 고체산화물 연료전지의 전해질 재료의 응용이 기대되는 Gd doped ceria를 고주파 유도결합 열플라즈마 법으로 합성하고 그 특성을 조사하였다. 본 연구에서는 나노 ㄴCeO2 10~100 um의 CeO2와 1~20 um의 Gd2O3를 Ce：Gd이 9:1 mol%와 8:2 mol%의 비율로 혼합한 선구체를 140 kVA의 RF plate power와 O2/Ar 플라즈마 생성 가스 조건에서 형성된 고주파 유도결합 열 플라즈마에 주입하여 ~50 nm 이하의 입도와 fluorite 구조의 결정화된 CeO2 구조를 갖는 Gd doped ceria 나노 분말을 합성하였다. FE-SEM, TEM, XRD, ICP-OES, EDS, BET분석법을 이용하여, 합성된 분말의 입도, 미세구조, 결정 구조, 조성, 표면 등의 특성을 관찰하였다.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.20 no.4
• /
• pp.185-191
• /
• 2010

To effectively utilize resources of reject ash and dredged soil, globular shape-formed artificial lightweight aggregate were manufactured in 8~10 mm size. Starting materials were changed various grading and composition, sintered at $1050{\sim}1250^{\circ}C$. The specific gravity, water absorptance of artificial lightweight aggregates were measured on the basis of the KS. In this study could make a prediction about application of bloating mechanism by ferrous materials and alkali/alkali-earth oxide at high temperature.

• Composites Research
• /
• v.25 no.6
• /
• pp.172-177
• /
• 2012

For the manufacture of low resistance Si-SiC composite, the properties of reaction sintering in the green body of various mixed ${\alpha}$-SiC powder size with the various carbon contents from 0wt% to 20wt% were investigated. The samples preparation was green body by CIP method under this condition, molten silicon infiltration process was conducted to reaction bonded silicon carbide. the results of sintered density, 3-point bending strength and resistance of analysis showed that varied carbon and silicon melt reacted to convert to fine ${\beta}$-SiC particle and the structure was changed to dense material. The amount of fine ${\beta}$-SiC particle was gradually increased as carbon content increase. According to mixed composite, it's mechanical and specific resistivity properties was strongly influenced by carbon content within 10wt% more then carbon content 10wt% was strongly influenced by phase transition.

• 한국해양학회지
• /
• v.30 no.2
• /
• pp.69-76
• /
• 1995

A turbidite core sediment (RN88-PC5) from 2051 m on the deep-sea floor at the southern margin of Okinawa Trough was examined. Sedimentological characteristics were quite different between sandy sediments and hemipelagic sediments and hemipelagic sediments in terms of benthic foraminiferal assemblage, grain-size and chemical composition. All turbidite sandy sediments were clearly transported from shallow area as they include typical coral reef dwelling benthic foraminifera which were not found in the background hemipelagic sediments. These layers also suggest that the sediments were transported by turbidity-related currents and implies that sedimentological mechanisms were different between sandy sediments and hemipelagic sediments. The result of the /SUP 14/ C age dating and the stable oxygen isotopic fluctuation of planktonic foraminifera show a gradual warming trend of the surface water from about 10 Ka to present. Also Termination lb as well as two fresh water input events were recognized at ca2 and 7 ka.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2016.05a
• /
• pp.481-481
• /
• 2016

하천퇴적물은 물의 순환과정에서 유역으로부터 유입되는 물질에 따라 조성이 변하게 된다. 특히 입자가 작은 토양과 유기성 물질들은 물순환과정에 이동성이 크게 나타나며, 인간에 의해 개발된 지역은 자연상태에 비해 이동하는 물질이 많이 나타나곤 한다. 본 연구에서는 하천에 건설된 보에 대한 퇴적물 조사를 실시함으로서 향후 수질관리에 필요한 기초 자료를 수집하고자 하였다. 본고에서는 금강과 낙동강에 건설된 보의 주요지점에 대한 퇴적물 조사를 실시하고 수질영향을 평가하였다. 조사는 홍수기전과 홍수기후로 구분하여 2회에 걸쳐 실시하였으며 물리적 성상과 화학적 항목에 대한 분석을 실시하였다. 입도분석 결과 금강 주요 10개 지점의 퇴적물 조성은 Sand, Silt와 Clay 성분이 혼합되어 있는 것으로 분석되었으며, 삼각좌표 분류법에 의한 토성은 대부분의 지점이 실트질양토(SiL)로 평가되었다. 완전연소가능량은 0.35~1.37로 전 지점에서 하천 호소 퇴적물 오염평가 기준의 유기물 함량기준 13%보다 높지 않은 것으로 나타났으며 홍수기 전 후에도 거의 유사하였다. 금강에서는 중금속뿐만 아니라 유기물 및 영양염류도 기준보다 낮게 나타났으며, 모든 항목에서 환경부예규인 하천 호소퇴적물 오염평가 기준보다 낮게 평가되었다. 하상 퇴적물이 수질에 미치는 영향을 평가하는 용출실험에서도 유기물 및 중금속 모두 수질에 미치는 영향은 거의 없는 것으로 평가되었다. 낙동강 주요 26지점의 입도분석 결과 퇴적물 조성은 대부분 Sand로 구성되어 삼각좌표 분류법에 의한 토성은 사토(S)로 평가되었다. 홍수기 전 후에 조사한 결과 완전연소가능량은 0.27~2.85으로 전 지점에서 하천 호소 퇴적물 오염평가 기준의 유기물 함량 기준보다 낮았으며 홍수기 전 후에도 거의 유사하였다. 화학적 성상 분석 결과 모든 항목에서 환경부예규인 하천 호소퇴적물 오염평가 기준보다 낮게 평가되었으며, 용출실험에서도 유기물 및 중금속 모두 수질에 영향을 거의 미치지 않는 것으로 평가되었다. 이번 조사는 4대강 건설 후 하상이 안정화 되지 않은 상태로 인해 지점간 특별한 경향성은 확인할 수 없었으며 보다 정확한 결과 도출을 위해서는 장기적인 조사를 통해 평가해야 할 것으로 판단되었다.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 1997.05a
• /
• pp.39-42
• /
• 1997

현재 반입이 중지된 난지도 매립지에 공원조성이나 하수처리장등의 시설을 설치하는등 매립지를 효율적으로 이용하려는 많은 계획이 진행되고 있다. 그러나 이같은 계획을 수행함에 알서 매립토의 성분을 분석하여 이를 토대로 적절한 대책이 마련된 후에 계획이 수행되어야 할 것이다. 따라서. 본 논문에서는 현재 설치되고 있는 난지 하수처리장 부지에 대하여 매립토의 조성성분 및 침출수의 성분을 분석하고 분석결과를 토대로 시설설치에 따른 토양오염의 가능성을 최소화 할 수 있는 대책수립의 기본자료로 제공하고자 하였다. 이를 위하여 대상지역의 매립토에 대하여 이물질의 중량비와 함수량 및 입도분석을 실시하였고 아울러 침출수의 오염도를 분석하였다.

• Journal of the Korean GEO-environmental Society
• /
• v.21 no.11
• /
• pp.21-26
• /
• 2020

Natural soil is composed of particles of various sizes, and the shear behavior which is a kind of mechanical behavior of the soil is affected by the particle size distribution. In addition, since the natural soil contains a large mixture of coarse and fine grained soil, it is difficult to clearly understand the shear behavior of the soil. Therefore, a ring shear test was conducted on sandy soils that has various particle size distribution in order to identify the effect of the distribution on shear characteristics of soils. At this time, sand and silt were used for coarse and fine grained soils, respectively, to make sandy soils by changing the silt content. Also the water was supplied during the test to confirm shear characteristics of sandy soils with various particle size distributions. The result shows that the shear strength increases as the silt content increases, and the strength decreases as the silt content increases over the sand. Besides, residual shear strength gradually decreases because of the silt content when the water is supplied.

• Journal of the Korean Geotechnical Society
• /
• v.18 no.3
• /
• pp.5-12
• /
• 2002

Hydraulic conductivity k is one of the most important engineering properties of soil. However, both field and laboratory procedures fur the determination of k are often tedious and expensive. This paper presents new models to predict k using statistical parameters from grain size distribution. A number of permeability tests far 36 types of sands mixed based on statistics were conducted to develop the regression-based models. Parameters used to estimate k are both the geometric mean and geometric standard deviation of the soil samples, or the particle-size distribution curve parameters such as D_{10},D_{50},D_{60}. Hydraulic conductivity predicted by this model is in good agreement with the laboratory measurements fir the soil samples obtained at 20 locations within the Korean Peninsula. The performances of the proposed models were also compared with those of existing models including Hazen's.