• Proceedings of the Korean Institute of Resources Recycling Conference
• /
• 2005.05a
• /
• pp.228-230
• /
• 2005

본 연구에서는 생활 폐기물의 소각 바닥재를 사용하여 입도 분리한 후 각 입도별 철 비철 금속이 함유된 바닥재를 자력세기에 따라 분리하였다. 철의 분석결과 4mesh이상의 입자에서 대부분의 철이 회수되었고 4mesh이하에서는 철의 함유량이 적었지만 50mesh 이하의 입자에서는 자력에 의해 대부분 분리되었다. 또한 각 입도에 따른 자력세기별로 철의 회수율을 측정한 결과 $25{\sim}130gauss(30{\sim}150volt)$에서는 낮은 회수율을 보였고 380gauss(150volt이상)의 높은 자력에서만 분리가 일어남을 확인할 수 있었다. 비철은 대부분 4mesh에서 분포하였고 전체적으로 낮은 양이 존재하였다.

• Journal of the Mineralogical Society of Korea
• /
• v.15 no.1
• /
• pp.33-43
• /
• 2002

Mineral composition and chemical properties of Hwangto (reddish residual soil) that used in feeding of cattles at Iksan, Jeollabuk-do, Korea were examined according to particle size separation such as gravel, sand, silt, coarse clay and fine clay. Mineral composition analyses reveal that gravel and sand are mainly composed of quartz and feldspars and that kaolin mineral and illite are dominant in clay and silt. Iron oxides are mainly included in fine clay. According to chemical analyses of major elements, Al, Fe and $H_2O$ contents are increased with decreasing of particle size. This trend well agrees with increase of clay minerals in smaller particles, Chemical analyses of trace elements indicate that contents of Zn, Rb, Sr, Ba, Pb significantly differ with particle sizes. Ba and Sr are included in feldspars since these elements are abundant in sand containing abundant feldspars. Pb and Sm are abundant in sample before particle size separation, but the contents are significantly decreased after separation. Therefore, most of these elements appear to be existed as removable phase. Nb, La, Th, Ce are more abundant in silt. The contents of all the other trace elements tend to be increased in smaller particles containing more clay minerals. The contents of changeable cations and teachable elements in acid and alkali solutions are high in clay samples. All the above results indicate that using the portion of smaller particle of Hwangto for livestock feed rather than bulk Hwangto can improve cation exchangeable capacity, ion leaching capacity and sorption properties.

• Resources Recycling
• /
• v.8 no.5
• /
• pp.51-58
• /
• 1999

The sbdy iwestlgaled ihc propa-ties of Lhe dust\ulcorner rrom fe~~oallomya ~~ufacturTeh. e chemical composition, cornpasitlon material, p d c l e sire md shapes of the bulk dust, sired dust and magnetically separated durl were mvesligaled. As the re\ulcornerulL, we suppose that the dust from &gh Carbon Fenama~~gunesMc anuiact~vingP rocess is not sufiicient as solulce material of Mn because of ale low Mn canlenl (13.5%) and complicaled composition mate~ial. The dust from Bug F!lter or AOD Proccss is mi~inlym ade up of 0.2-2 pm Mn30, (Hausmam~iu)p iutlde in spherical shape and thc Mn content is 63.190.The dust from Cooler of AOD Process is inninly made up of coarse Ca(O1-Or)zM. n,FeyO,, SiO, and fine Mn30d.

• Journal of the Mineralogical Society of Korea
• /
• v.5 no.1
• /
• pp.22-31
• /
• 1992

The Sancheong kaolin was fractionated into 9 size fractions by wet sieving, sedimentation, and centrifugation. The systematic X-ray diffraction combined with electron microscopy shows that the clay mineral composition of each size fraction is related to the original fabric of kaolin. Minerals such as halloysite (10${\AA}$), kaolinite, illite, and goethite which were formed by procipitation from solution are generally concentrated in the finer fractions, whereas verniculite which was formed by pseudomorphic transformation from other primary minerals are concentrated in the coarser factions. Kaolinits of various types which were formed by precipitation or transformation show a wide size range but they are generally concentrated in the coarser fractions. Halloysite or halloysite-kaolinite clusters in coarse fractions are the fragmentation products of the walls of original boxwork clusters in coarse fractions are the fragmentation products of the walls of original boxwork kaolin which escaped the complete dispersion even through the grinding, ultrasonic agitation, and chemical treatment. Separation of fully hydrated halloysite and kaolinite was possible by systematic wet size fractionation. The coarse-grained minerals such as vermiculite and kaolinite are usually removed during the preparation of clay fraction smaller than 2${\mu}m$, whereas the fine-grained minerals such as illite and goethite are overlooked in X-ray diffraction of the bulk samples because of their minor contents. The systematic wet size fractionation is needed for understanding of the exact mineralogy of kaolin of weathering origin.

• The Journal of Engineering Geology
• /
• v.32 no.2
• /
• pp.241-255
• /
• 2022

In this study, sieve analysis testing was performed on weathered granite soil from Yecheon (eastern South Korea) before and after water washing in accordance with the sieve analysis regulations of KS F 2302. The changes in particle separation and particle size distribution after washing with water were analyzed. Image analysis using an optical microscope revealed that soil particles were separated into smaller particles by water washing. The change in the particle size distribution curve was assessed using five index values. The increase in the fine particle fraction (<0.075 mm) was 13.67%, the increase in the 0.075-0.25 mm fraction was 19.44%, and the mean particle diameter (D₅₀) decreased by 0.663 mm. In addition, the maximum passage width (B_M) of the particle size distribution curve increased by 21.08% for the #30 sieve, and the moving area (A) of the particle size distribution curve was 69.28%·mm. These results suggest that washing with water is an effective way to prevent underestimation of the fine particle content in soil.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.18 no.4
• /
• pp.64-68
• /
• 2010

Recently, MBT(Mechanical Biological Treatment) facilities were built up and operated to separate and recycle MSW(Municipal Solid Wastes)in South Korea. However, the size distribution of MSW is very rough, and it is causing operation problem because MSW would be crushed in undersize diameter by mechanical equipment before feeding each seperation process. Also, the organic material should be pre-seperated to reuse recycle material in MSW. In this research, the reactor of 1ton/batch using the super-heated steam was tested to present the separation efficiency and the size distribution of MSW by experimental factors.

• Proceedings of the Korean Institute of Resources Recycling Conference
• /
• 2005.10a
• /
• pp.240-242
• /
• 2005

본 연구에서는 생활폐기물 소각장에서 발생하고 있는 바닥재를 이용하여 각 입도에 대해 자력의 세기에 따라 철/비철선별 하였다. 자력의 세기에 따른 분리량과 분리된 산물의 철함 유량을 조사함으로써 자력 및 비철 효율을 파악하고자 하였다. 또한, 비철 선별기를 사용하여 비철 선별 효율을 조사하였다. 자력선별결과, 자력의 세기가 증가할수록 자력선별에 의해 분리량이 증가하였으나, 분리된 산물의 철함유량은 감소하는 경향을 나타내었다. 이러한 결과는 자력세기의 증가가 철회수량의 증가보다는 불순물의 혼입량을 증가시키는 것으로 생각된다. 비철의 경우, 입자크기가 커짐에 따라 분리율이 높았으며, 4.75mm이상에서는 대부분의 비철이 회수되었다.

• Resources Recycling
• /
• v.12 no.3
• /
• pp.3-12
• /
• 2003

Physical separation containing grinding, sieving, dry magnetic separation and air classification were carried out in order to recover Ta anode from waste Ta condenser. Roll crusher wat used for the liberation of resin and metals in closed circuit system. The liberation between Ta anode and resin was easily achieved, whereat some of metals did not liberated from the Ta anode when the waste condenser was crushed below 8 mesh. When the crushed sample were divided into 8/10 mesh, 10/18 mesh and -18 mesh, metals was mainly remained in 8/10 mesh in contrast to Ta anode was in +18 mesh. It was shown that resin was more easily crushed rather than metals from the result of that resin content was 71.5％ in -18 mesh. The liberation efficiency was different with the input size of the crushed sample and average efficiency was 62.3% due to the locked Ta anode particles. The results of air classification test for the crushed samples showed that optimal air flow are 39㎥/h, 32㎥/h, 20㎥/h. respectively. When the sample were separated with optimal condition, 94.45％ Ta anode containing 97.47 wt.％ Ta anode, 0.93 wt.％ resin. 1.61 wt.％ metal was recovered with 49.39 wt.％ yield.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2010.03b
• /
• pp.21-21
• /
• 2010

현재 시대에는 자원의 부족으로 인하여 원재료의 낮은 등급을 정제하는 것이 중요하다. 자기분리 기술이 산업 계 원재료들의 정제에 적용되는 것이 기대된다. 예를 들면 고순도의 유리나 절연체를 제작하기 위한 원재료에서 철산화물의 제거는 매우 중요하다. 자기를 띠는 입자들과 자기분리 필터 와이어 사이에 발생하는 끌어당기는 힘은 다른 자기분리와 비교 할 때 초전도 자기분리에서 훨씬 강하다. 초전도 마그네트를 이용하여 높은 자기장을 형성하기 때문에 일반 자기분리의 자성 입자 포획력을 능가한다. 본 연구에서는 습식 조건에서 산업계 원재료로부터 철계 산화물을 제거하기 위해서 초전도 자기문리를 사용하여 실험하였다. 실험에 사용된 시료는 유리원료로 사용되는 2종류로 시료A는 0.1 ~ 0.3 mm의 평균입도를 갖는 모래형상이며 시료B는 평균입도 0.03 ~ 0.1 mm의 고운모래 형태이다. 자기분리를 위해 상온에서 100 mm의 직경을 갖는 600 mm의 높이의 전도냉각형 Nb-Ti 초전도 마그네트를 사용하였으며 시료를 위에서 공급하고 아래로 배출되도록 수직형으로 설치하였다. 시료 500 g과 증류수 2 L를 혼합하여 교반시키고 6 T의 자기장 하에서 실험하였다. 자기분리 필터는 초전도 마그네트에서의 자기장의 분포를 해석하여 디자인하였다. 자기분리 필터의 자기적 특성을 알아보기 위해 진동시료형 자력계를 사용하였다. 산업계 원재료는 X선 형광분석기를 사용하여 성분을 분석하였다. 산업계 원재료를 이용하여 초전도 자기분리를 실시한 결과 철계 산화물은 시료A에서 43.5 %제거되었으며 시료B에서는 77.3%제거되었다.

• Resources Recycling
• /
• v.29 no.3
• /
• pp.11-23
• /
• 2020

This study aims to investigate breakage and liberation characteristics of iron ore from Shinyemi mine, Jeongseon by ball mill. Parameters of breakage functions for three grade samples of iron ore were obtained using single-sized-feed breakage test and back-calculation based on nonlinear programming. The results showed that with the increase in the grade of iron ore, the breakage rate factor decrease whereas the particle size sensitivity decreases. This results from retardation of microcrack-propagation by magnetite grain in the ore. Breakage distribution analysis showed that the breakage mechanism appear to be impact fracture dominant with the increase of grade owing to the stress distribution effect by magnetite grain. Degree of liberation (DOL) increased with the increase in grade and decrease in particle size, respectively. Using the breakage function and size-DOL relationship, a model that can predict time-dependent-DOL is established. When scale-up factors from operating condition are available, the model is expected to be capable of predicting size and DOL with time in actual mining process.