• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.2
• /
• pp.983-989
• /
• 2013

The current research reviewed the design conditions that would maximize the efficiency of the hybrid collector that combines in one unit "cyclone-inertial impaction-bag filter". The computational analysis for the shape of cyclone entry predicts that a design that installs the guide vane at the entry of the tangential type cyclone brings a high-rpm and powerful vortex, very effective in promoting the deflection of coarse particles from the streamline at the cyclone. As the lower part of the cyclone is venturi-shaped, however, a strong flow downward of 4 to 5 m/sec persists through the lower part of the hopper, revealing the likely reentrainment of collected dust. And the removal of the venturi at the lower part of the cyclone would solve the problem of the reentrainment of collected dust. The acceleration of the flow velocity through the adjustment of the gap of the collision baffle would increase the effect of collision, but as the interference with the dust separation is expected, the original design should be kept for the baffle.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.11
• /
• pp.6452-6457
• /
• 2014

R1234yf has been developed as an alternative refrigerant to R134a, which has been associated with global warming. The capillary tubes as expansion valves control the mass flow rate and balance system pressure in the refrigeration cycle. The present numerical model used the governing equations including the law of conservation of mass, momentum, and energy in a capillary tube. The mass flow rate of R1234yf decreased by 47.0% as the capillary tube length was increased from 1 to 4 m. As the inner diameter of the capillary tubes was changed from 1.3 to 1.7 mm, the mass flow rate of R134a and R1234yf increased by 117.9% and 121.0%, respectively. The mass flow rate of the R134a and R1234yf increased by 28.3% and 29.1% with subcooling increasing from 0 to $7^{\circ}C$. In addition, when the inlet temperature of the capillary tubes was changed from 35 to $60^{\circ}C$, the mass flow rate of R134a and R1234yf increased by 31.0% and 45.4%, respectively.

• Korean Journal of Plant Taxonomy
• /
• v.35 no.3
• /
• pp.201-209
• /
• 2005

Two new naturalized species, Amaranthus hybridus and Crepis tectorum, are reported here. Descriptions and illustrations of the species and comparison of morphology with related species are provided. Amaranthus hybridus was first found at Nanjido, Seoul and is widely distributed in the central and southern part of Korean peninsula. New Korean name is given as "Ginteolbireum". It is well distinguished from the related species, A. retroflexus and A. patulus, by its late flowering time (September to October), sparse hair on the leaves, similar length between tepal and fruit, and long inflorescence without division. Crepis tectorum was first found at the entrance of Weoljeongsa Temple in Pyongchang-gun, Gangwon-do and spreads rapidly to other areas. New Korean name is given as "Nadomindulle".

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.36 no.3
• /
• pp.301-307
• /
• 2012

The characteristics of pressure loss in an asymmetric bifurcating tube were investigated numerically for steady inspiratory conditions. The loss coefficient K calculated for various asymmetry and flow-distribution ratios found in human lung airways showed a power-law dependence on the Reynolds number (Re) and length-to-diameter ratio (L/d), with different exponents for Re $\geq$ 100 and Re < 100. The fundamental characteristics of the asymmetric bifurcation are similar to the case of symmetric bifurcation. In addition, the effect of skewed inlet velocity profiles on the pressure loss was weak, and decreased with an increasing number of bifurcations.

• Archives of design research
• /
• v.14 no.4
• /
• pp.179-188
• /
• 2001

Exhibit space is result that various kinds works of architecture design, interior design, plan and control of exhibit program, embodiment to display space, operation and administration etc. are formed accomplishing creation. Because exhibit space must consider interaction of value that is in dwelled along with the external form about human and exhibits. Therefore, display space of exhibition must achieve functional role that can accomplish communication with spectator as well as function as place that possess products of accumulative value. Therefore, we must establish effective communication plan by position and form of display space as well as properly of exhibits, display contents, exhibit program to achieve purpose of trade fair display. Display space of trade fair can be classed by wall style, corner style, head style, island style, two entrance style 5 according to the position. And we must plan communication plan by these position dividing the function to passive communication area, active communication area, intensive communication area, function achievement area. We will can grope contents and method for successful exhibit through communication plan that is connected form and position of exhibit between exhibit space of such trade fair and we may achieve purpose of trade fair display.

• Proceedings of the KAIS Fall Conference
• /
• 2012.05a
• /
• pp.426-430
• /
• 2012

본 연구에서는 3차원 수치 해석 기법으로 SDR 반응기 내 유동 특성을 모사하여 유동 분포 및 체류 시간등을 확인하고 혼합 특성 개선을 위한 방법에 대해 연구하였다. 본 연구 대상 SDR 반응기는 입구 덕트와 반응기 본체의 접속 구간에 가이드 베인(Guide vane)이 설치되어 있고 그 바로 하부 지점에 흡수제를 분무하는 노즐이 설치되어 있다. 이는 처리가스가 반응기로 유입될 때 가이드 베인에 의해 선회류를 형성하여 분무된 흡수제와의 혼합을 촉진시키기 위한 목적으로 설치하였다. 시간당 1,971$m^3/min$ at $260^{\circ}C$의 처리가스가 반응기 상부로 유입되어 가이드 베인을 거쳐 선회류를 형성한 후흡수제와 혼합되어 하부로 배출되는 구조이다. 유동 특성을 분석한 결과, 처리가스가 반응기 중앙으로 강하게 편중되고 있었으며 반응기 양 측면으로 부상 기류가 형성되고 있음을 확인할 수 있다. 또한 강한 편류에 의해 체류시간도 매우 짧은 것으로 판단되는 바, 가이드 베인의 기류 안내 각도가 적합하지 못함을 확인할 수 있었다. 이는 곧 혼합 특성 저하에 따른 미반응 액적의 다량 발생과 함께 고착에 의한 스케일 형성 가능성이 매우 클 것으로 예상되므로 혼합 특성을 개선할 수 있는 설계 변경이 필요할 것으로 판단되었다. 따라서 편류를 해소하고 노즐 근처에서의 체공시간을 확보할 수 있도록 가이드 베인의 안내 각도를 더 크게 변경한 결과, 기존 설계상에서 본체 중앙에 형성되는 편류가 해소되고 선회류의 전개 각도가 커지면서 체류시간 역시 약 5초 이상으로 유지되고 있음을 확인할 수 있었다. 따라서 가이드 베인의 각도만 변경하더라도 본체 형상의 추가적인 변경없이 유동의 혼합 특성을 개선시킬 수 있을 것으로 판단되었다.

• Proceedings of the KAIS Fall Conference
• /
• 2012.05a
• /
• pp.371-374
• /
• 2012

본 연구는 "사이클론과 관성충돌 및 백필터의 제진원리를 일체화한 고효율 멀티 제진시스템의 최적화 설계를 위한 수치 해석적 연구(I) : 집진기 입구 최적화 설계"에 이은 일련의 연구로서 앞선 연구에서 도출된 사이클론부 하단 벤츄리(Venturi)에서의 강한 하향 기류의 가속에 따른 분진 재비산 가능성에 대한 추가적 검토를 위한 연구이다. 사이클론부를 통과한 기류가 상향 흐름으로 방향을 전환할때 좀 더 가속시켜 빠르게 곡률반경을 형성하여 조대 입자의 분리를 극대화시키기 위한 목적으로 사이클론부 하단을 벤츄리 형상으로 설계하였으나, 유동장 분석 결과 벤츄리를 통과한 처리가스 흐름이 가속되면서 호퍼 하단까지 약 4~5 m/s의 강한 하향 흐름을 형성하고 호퍼 하부의 말단 부근에서 상향 흐름으로 방향 전환을 하고 있는 것으로 예측됨에 따라 설계 의도와는 달리 벤츄리 설치시 호퍼 하단에 포집된 분진의 재비산을 예방하는데는 크게 역할을 하지 못하는 것으로 나타났다.

• International Journal of Highway Engineering
• /
• v.13 no.4
• /
• pp.151-158
• /
• 2011

Tunnel sections on the expressway are different from rest of sections on the expressway in terms of velocity, the number of passing cars, and vehicle density which, in particular, affect drivers' behavior before and after drivers pass through the tunnel. However, literature review reveals that former studies are too focused on quantitative indicator to consider qualitative aspects. Thus, this study tried to find out qualitative factors affecting speed reduction in tunnel sections based on questionnaire surveys and its analysis in tunnel sections selected by taking consideration of diverse conditions. Analysis showed that factors concerning tunnel configuration (lane width, shoulder width, and tunnel length) related to very long tunnels increasingly popular recently had some effects on reduced speed inside of tunnels. It appeared that visual environment such as visibility of tunnel entrance had an impact in speed reduction and vehicle speed tended to change according to lighting illumination level inside of tunnels. It is expected that continual investment would be made in technological development related to expressway tunnel design and service improvement based on this study.

• Korean Journal of Ichthyology
• /
• v.7 no.2
• /
• pp.140-149
• /
• 1995

Morphology and histochemical characteristics of the alimentary tract in surfperch, Ditrema temmincki were investigated by histological observation. The relative length of gut(RLG) in surfperch, that is the postpharyngeal portion of the alimentary tract, is about 0.89 to standard length. The absence of a stomach, which is the part of expantion of the alimentary tract between esophageal end and the entrance of the bile duct into the intestine, was observed. The alimentary tract is divided into the esophagus, esophageal-intestine part, anterior intestine, mid intestine, posterior intestine, intestinorectum part, rectum, rectal-anus part, and anus by morphology and histochemical features. Morphology of mucosal folds is the most complexity in the rectum and the tunica muscularis of the esophagus and anus is more advanced than those of other parts. The epithelial layers of mucosal folds consist of columnar epithelium except for cuboidal cells of the anterior part of the esophagus. The goblet cells and polysaccharide absorptive cells were observed in the alimentary tract. Nutritive polysaccharide is mainly absorbed by the absorptive cells in the posterior intestine of the surfperch.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.34 no.6
• /
• pp.59-66
• /
• 2006

Acoustic cavity as a stabilization device to control high-frequency combustion instabilities in liquid rocket engine is adopted and its damping capacity is verified in atmospheric temperature. First, harmful resonant frequency in a modeling chamber can be damped effectively by the installation of properly-tuned acoustic cavity. Besides, geometric effects of acoustic cavity on damping characteristics are analyzed and compared quantitatively. Satisfactory agreements have been achieved with linear acoustic analysis and experimental approach. Results show that the acoustic cavity of the largest orifice area or the shortest orifice length was the most effective in acoustic damping of the harmful resonant frequency. Finally, it is proved that an optimal design process is indispensable for the effective control of combustion instabilities.