• The Journal of the Acoustical Society of Korea
• /
• v.42 no.1
• /
• pp.57-66
• /
• 2023

In this paper, it was investigated how the amount of energy harvesting will be varied from the FTEH which has inlet area is wider than outer area and attaching cantilever type MFC (Macro Fiber Composite) using by theoretical and experimental approaches. When MFC length increased 50 % vibration displacement also increased 3.5 times. When thickness decreased vibration displacement increased 30.9 times. In underwater tank experiments FTEH with spiral screw, flexible support, vertical direction fabrication cases showed maximum energy harvesting more 5 times than the case of MFC installed horizontally without spiral screws and on rigid supports. When the flow speed of 0.24 m/s FTEH's optimal resistance applied 4,10 kΩ, energy storage in the capacitor was measured 4 ㎼·s during 350 seconds. It was confirmed that the charging energy can be increased by lengthening the capacitor charging time of the large-area MFC installed vertically on the flexible support at high flow speed.

• Korean journal of applied entomology
• /
• v.42 no.4
• /
• pp.315-321
• /
• 2003

Larval entrance and adult emergence holes of Japanese pine sawyer (Monochamus alternatus), primary vector of pinewood nematode (Bursaphelenchus xylophilus), were measured in dead pine logs from 1999 to 2002. Their distributions within pine log were also analyzed. More numbers of entrance and emergence holes were distributed on crown than trunk part as 56.2 and 27.7 holes/m$^2$, respectively Higher proportions of entrance (27.5％) and emergence holes (22.4%) were distributed on the log with 8 to 10 cm diameter; the larger or the smaller logs had fewer holes. Surface area of entrance hole was 65.8 $\textrm{mm}^2$ and diameter of emergence holes was 7.0 mm in average. Average depth of pupal chamber was 24.8 mm from surface to the bottom of the chamber, and its volume ranged from 200 to 2.000 ㎣ Average distance between entrance and emergence holes on bark surface was 3.3 cm. Gallery length from the beginning of entrance hole to the end of emergence hole was 46.2 mm.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.4
• /
• pp.324-329
• /
• 2020

The emergency evacuation support system provides a safe means of evacuation by preventing the inflow of smoke through the formation of a smoke shield curtain in fire situations and pressurizing fresh air to the inside of the smoke shield curtain. In this study, numerical analysis was performed to examine the effects of the hole size on the flow inside the smoke curtain. As the air supply size decreased, the flow rate through the air supply was formed relatively uniformly from the inlet to the outlet length of the emergency support system. In addition, the size of the air supply hole was more than 20 mm, the flow rate was very low near the outlet, so the air supply hole size should be smaller than 20 mm. In addition, the minor loss of the air supply hole was calculated to be K = 1.5 from the numerical results. Therefore, the proper design of an emergency evacuation support system is possible using the flow characteristics according to the size and minor loss of the air supply hole.

• Korean Journal of Plant Resources
• /
• v.32 no.4
• /
• pp.344-354
• /
• 2019

In seven species of Korean Asarum, 44 qualitative and 28 quantitative characters were reviewed taxonomically. Among 44 qualitative characters observed in vegetative and reproductive organs, the states of 27 characters were common in all the seven species. Among 28 quantitative characters, five characters have the same values in all the seven species; the number of cataphyll (2-4), leaf (2), calyx lobe (5), stamen (12) and pistil (6). White spots on adaxial surface of leaf (effectively) distinguished A. maculatum and A. versicolor from the other species. Many long soft hairs on abaxial surface of leaf distinguished A. mandshuricum from other species with short hairs. The glandular hairs on inner surface of calyx tube were divided into 2 types, reflecting the taxonomic relationships between the species: Type 1 has non-stalked glandular hairs (A. maculatum, A. sieboldii and A. sp.), and Type 2 has stalked glandular hairs (A. patens, A. versicolor, A. mandshuricum and A. misandrum). The length, shape, colour of calyx lobe and the extent to which the calyx lobe recurves, as well as the diameter and colour of calyx tube throat, were confirmed to be taxonomically valuable. In the case of glandular hair density on the surface of calyx lobe, A. patens with low density and A. sp. with high density were clearly distinct from all the other species with intermediate hair density. Meanwhile, the stylar protuberance length of A. patens (2.9-3.3 mm) was strikingly different from other species (1.4-2.5 mm). Additionally, further examination of the identities of A. yeonbyeonense and A. yeonbyeonense var. viridiluteolum is required.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2019.05a
• /
• pp.257-257
• /
• 2019

최근 기후변화에 따른 대응을 위해 기존 수자원 활용의 고도화 및 배수능력 증대를 위해 다양한 방안이 추진되고 있으며, 그에 따라 기존 개수로에 신규 수로를 연결하여 합류와 분류를 시키는 사례가 증가하고 있다. 특히 신규 개수로 연결을 위한 분류부 형상은 관련 설계기준, 분류유량의 규모, 해당 지점의 하상변동 경향, 지형여건, 흐름 분류시설 및 구조물의 형태(양수펌프장, 스크린이나 수문, 암거설치)와 같은 구조적 요인 등에 의해 달라지지만, 이와 관련된 연구가 매우 부족한 실정이다. 따라서 본 연구에서는 2차원 수치모형을 이용하여 분류부 평면형상 변화에 따른 분류유량비와 흐름분리구역 분포 등에 대한 흐름특성을 분석하고 이수와 치수계획 수립 등에 활용하고자 한다. 본 연구에서는 TELEMAC-2D 모형을 이용하여 주수로 상류 유입흐름의 프루우드 수가 0.74, 0.52인 두 흐름에 대해 형상변화 폭을 주수로 폭(B)의 1B, 주수로 형상변화를 급확대, 점진적 확대 구간길이를 1B~3B로 변화시키며 분류유량비(분류수로 유입유량/상류 유입유량)와 흐름분리구역의 위치와 크기 등에 대한 분석을 수행하였다. 분류부 상류 유입흐름의 프루우드 수가 0.74, 분류유량비는 0.33인 흐름은 주수로 형상변화 구간길이가 1B 일 때 0.44~0.46, 3B일 때 0.54~0.60으로 점차 분류유량비가 증가한다. 반면 상류 유입흐름의 프루우드수가 0.52, 분류유량비가 0.52인 흐름은 주수로 형상변화 구간길이가 1B일 때 0.77~0.82에서 3B일 때 0.70~0.80으로 점차 분류유량비 증가율이 감소하는 경향을 나타내게 된다. 주수로 형상변화 폭을 0.5B, 1B로 달리하여 수로 형상변화를 시킨 경우 분류유량비 증가율은 각각 135~162%, 134~176%로 나타났으며, 이는 수로 형상변화 폭보다 변화구간 길이가 더 큰 분류유량비 변화에 영향을 미치는 것을 확인할 수 있다. 흐름분리구역은 상류 유입흐름의 프루우드 수가 0.74인 경우 수로형상 변화구간과 분류수로 입구에 형성되지만, 상류유입흐름의 프루우드 수가 0.52인 경우 수로형상변화 구간과 주수로 하류에도 형성된다. 수치실험 결과 동일수로 폭 직사각형 $90^{\circ}$ 분류수로에서 분류부 평면형상의 변화에 따라 주수로 하류방향흐름의 관성력은 감소하는 반면 분류수로로 향하는 횡압력경사와 흐름분리구역 발생위치 변화로 인해 분류 수로내 통수능이 증가하여 분류유량비가 급격하게 증가하게 된다. 또한 분류부 상류 유입흐름의 관성력이 작은 경우 분류부 평면형상 변화시 주수로 하류방향에서도 흐름분리구역이 형성되고 주수로 종방향 수위가 상승함에 따라 분류흐름 계획수립 시 세심한 주의가 필요하다.

• Journal of Forest and Environmental Science
• /
• v.15 no.1
• /
• pp.107-116
• /
• 1999

For the study on the variation of Pinus densiflora S. et Z. natural populations. 13 stands were selected in Kangwondo region in 1994. They were located in Hyoja-Dong, Chunchon-Si [plot 1]; Sinnam-Myun, lnje-Gun [plot 2]; Buk-Myun, lnje-Gun [plot 3]; Seo-Myun, Yangyang-Gun [plot 4 and 5]; Sonyang-Myun, Yangyang-Gun [plot 6]; Toseong-Myun, Goseong-Gun [plot 7]; Synrim-Myun, Wonju-Si [plot 8]; Dunnae-Myun, Hoengsong-Gun [plot 9]; Jinbu-Myun, Pyungchang-Gun [plot 10]; Sogumgang, Kangneung-Si [plot 11]; Seo-Myun, Ulchin-Gun [plot 12]; and Mitan- Myun, Pyungchang-Gun [plot 13]. The morphological characteristics of needles and cones were investigated for twenty individual trees from each population. The results are summarized as follows: 1. Among needle characteristics, length, the number of serration. and the number of stoma row were significantly different among populations and between individuals within a population. They were 69.3~91.9mm, 25.1~28.7 per 0.5cm, and 4.1~6.2 rows for abaxial side and 2.9~4.6 rows for adaxial side, respectively. 2. Among cone characters surveyed. length and diameter were significantly different among populations and between individuals within a population. They were 31.1~43.7mm and 20.0~24.1mm, respectively. 3. A highly positive correlation was observed between the number of stoma row of abaxial side and that of adaxial side. and between length and diameter of cone. But the number of serration was negatively correlated with all traits. 4. The distance from seashore was positively correlated with needle length and the number of serration, but negatively correlated with the number of stoma row and cone length. However, the altitude was positively correlated with the number of serration, but negatively correlated with the number of stoma row and cone length. 5. Cluster analysis using average linkage method for needle and cone characteristics showed two groups to Euclidean distance 1.0. They were group I consisting of plots 1, 8, 12, and 13 and group II of plots 2, 3, 4, 5, 6, 7, 9, 10, and 11. However, group II was divided again to Euclidean distance 0.8, that is a group including plots 2, 3, 9, and 11 and the other group comprising plots 4, 5, 6, 7, and 10.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.30 no.3
• /
• pp.139-145
• /
• 2002

이륙중량 4000kg, 10-12인승급 다목적 헬리콥터에 적용가능한 엔진 개량 개발을 목표로 기존 헬리콥터 엔진을 개량대상으로 선정하고 이러한 다목적 헬기의 요구조건에 부합하기 위해 기존 엔진의 요소부품을 재설계하였다. 첫 단계로 최소변경으로 720 hp에서 840 hp로 출력을 증강시키기 위하여 2단 축류압축기의 기존 입구 유도익을 제거하고 익현의 길이를 증가하여 유량 및 압축비를 증가시킴으로써 출력 증강을 얻도록 재설계를 수행하였다. 이러한 2단 축류압축기의 성능을 검증하기 위하여 두 번째 단 단독시험 및 전체 2단에 대한 성능시험이 수행되었으며 첫 번째 단의 성능은 이 결과로부터 도출되었다. 성능시험결과 전체 2단 압축기는 유량 3.088 kg/s에서 압력비 2.14, 단열효율 88%의 성능을 갖는 것으로 나타났으며 압축기 출구의 압력 및 온도 분포를 레이크를 이용하여 측정하였다.

• Journal of Power System Engineering
• /
• v.15 no.3
• /
• pp.31-37
• /
• 2011

직조 금속 스크린 리브(rib) 이 바닥에 설치된 사각 덕트에서 열전달과 유체유동의 압력강하를 측정하기 위해 실험적 연구를 수행하였다. 시험부의 치수는 200 mm(W) ${\times}$ 40 mm(H) ${\times}$ 712 mm(L)이고 수력직경은 66.6 mm이다. 입구영역에는 1.72m 길이의 가열되지 않은 동일한 치수의 채널을 설치하였다. 메쉬가 다른 4가지의 직조금속 스크린 리브에 대해 측정하였다. 그리고 비교를 위해 일체형 리브에 대해서도 측정하였다. 국부 열전달 계수의 측정에는 스테인레스 강제 포일(foil) 히터와 T형 열전대률 이용하였다. 레이놀즈 수는 23,000에서 58,000의 범위이다. 덕트의 수력직경($D_h$)에 대한 직조 금속 리브의 높이(e)의 비($e/D_h$)는 0.075 이고 리브 간격(p)과 높이의 비(p/e)는 10이다. 실험 결과 메쉬가 없는 일체형 리입에서 가장 누셀트 수와 마찰계수가 컷다.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2006.05a
• /
• pp.73-76
• /
• 2006

Acoustic cavity as a stabilization device to control high-frequency combustion instabilities in liquid rocket engine is adopted and its damping capacity is verified in atmospheric temperature. Geometric effects of acoustic cavity on damping characteristics are analyzed and compared quantitatively. Satisfactory agreements have been achieved with linear acoustic analysis and experimental approach. Results show that the acoustic cavity of the largest orifice area or the shortest orifice length was the most effective in acoustic damping of the harmful resonant frequency finally, it is proved that an optimal design process is indispensable for the effective control of combustion instabilities.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.3
• /
• pp.440-447
• /
• 2012

Numerical model experiments of wave transformation due to the reclamation and the construction of breakwater in case of 50 years design wave were performed using time dependent mild slope equation included shoaling, refraction, diffraction, reflection and wave breaking. As waves propagate to the shore, wave height gradually diminishes by the bottom friction and wave breaking etc.. After the reclamation and the construction of 75 m length breakwater, wave height distributions in the lee of breakwater have the range of 29~128 cm. To make better the harbor tranquility the length of breakwater needs to extend more than 100 m. After the construction of breakwater, wave height in the lee of the structure was deduced over 80%.