• Proceedings of the KAIS Fall Conference
• /
• 2012.05b
• /
• pp.656-658
• /
• 2012

본 논문에서는 엔진의 엔진성능, 안전성 및 내구성에 직접적인 영향을 미칠 수 있는 LP 연료필터의 유동 특성을 분석하고자 하였다. LP 연료필터를 3차원 모델링하였으며, 유동해석을 위하여 계산격자를 구성하고 유동해석을 수행하였다. 유동장을 분석하여 입구부를 거쳐 연료필터를 지나 출구부까지 유동이 원활한 것을 확인하였고, LP 연료의 유동장은 필터내에서 양호한 것으로 판단된다. 또한, 연료필터 내부의 압력강하량을 분석하였으며, 질량유량이 증가함에 따라 압력강하량이 증가하였다.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2011.11a
• /
• pp.977-980
• /
• 2011

In this paper, explain to development of low pressure axial compressor performance test rig in KARI. Performance test rig consist of a entrance section, rotor, stator, shaft, rig housing, bearing housing and exit section. Test rig design structural optimization to rotor dynamics analysis of the simplified rotor-shaft assembly and flow analysis of entrance/exit section.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2003.04a
• /
• pp.161-166
• /
• 2003

The micro-extruding die is a die for manufacturing of fine-wire by extruding process. The fine-wire made from the micro-extruding can be effectively applied to fields of semiconductor parts and medical parts etc. It is predicted that the demand of fine-wire in industry is more and more increasing. In this study $\phi50\mu m$ micro-drill which is coated with diamond is used for drilling of super micro-hole sizes. For the machining of taper parts of entrance and exit, drill having $\phi50\mu\textrm{mm}$ inclination angle $20^{\circ}$and angle $30^{\circ}$ is used. This is useful for anti tool-breakage and excessive too-wear in drilling process. After micro-drilling, the polishing process by diamond abrasive and polishing wood s carried out for increasing surface roughness.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.10a
• /
• pp.202-205
• /
• 2002

The micro-extruding die is a die for manufacturing of fine-wire by extruding process. The fine-wire made from the micro-extruding can be effectively applied to fields of semiconductor parts and medical parts etc. It is predicted that the demand of fine-wire in industry is more and more increasing. In this study $\Phi$ 50${\mu}{\textrm}{m}$ micro-drill which is coated with diamond is used for drilling of super micro-hole sues. For the machining of taper parts of entrance and exit, drill having $\Phi$ 9mm inclination angle 20$^{\circ}$ is used. This is useful for anti tool-breakage in drilling process. After micro-drilling, the polishing process by abrasive is carried out for increasing surface roughness.

• Proceedings of the KOR-BRONCHOESO Conference
• /
• 2003.09a
• /
• pp.112-112
• /
• 2003

호흡곤란에 대한 적절한 대처는 의사로서 숙지하여야 할 가장 중요하고도 기본적인 개념 중의 하나이다. 상부 기도에 발생하는 여러 가지 임상적 상황은 흔히 흡기성 천명을 동반하는 호흡 곤란으로 나타나고, 이에 대해 흔히 기도 삽관이나, 기관절개술 등이 행해 지지만, 그 발생 원인에 대해서 감별점들을 숙지하지 않으면, 원발 질환에 대한 합리적인 치료 뿐만 아니라 응급상황에서 적절하게 기도를 확보하는 데에도 문제가 생길 수 있다. 후두 상부에 일어나는 기도폐쇄의 상황은 비강에서부터 인두와 성문 상부, 식도 입구부에 이르는 해부학적 위치에 발생하는 다양한 질환들에 의한다. 비강과 비인두에는 pyriform aperture stenosis, choanal atresia, lacrymal duct cyst, 또는 teratoma나 encephalocele과 같은 질환이 발생할 수 있다. 구강, 인두부에서는 다양한 종류의 안면골격의 이상이나 설거대증, 또는 설갑상선, 갑상설관낭종, 또는 유피종등이 설기저부에 발생하기도 하고, 흔한 이유로 심한 편도-아데노이드 비대가 심각한 호흡곤란을 일으키기도 한다. 특히 소아에서는 이물의 가능성도 항상 염두에 두어야한다 이와 같이 기도 협착의 위치에 따라서 임상적 표현 양상이 구별될 수 있고, 또 부위에 따라 다양한 질환이 감별되어야 하므로 발생 위치에 따른 각 질환의 이해가 적절한 기도의 관리를 위해서 필수적이다.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.48 no.10
• /
• pp.801-807
• /
• 2020

Opening characteristics of a main oxidizer shut-off valve at different valve inlet pressures have been experimentally investigated. The pilot pressure at the moment of the valve opening increases linearly with increasing the valve inlet pressure and the increased pilot pressure reduces the valve travel time. As the pilot pressure increases at the moment of valve opening, the time to start opening the valve is delayed resulting in increasing the valve opening time. With the increment of the valve inlet pressure, the valve opening time is mainly determined by the time required for the pilot pressure to start opening the valve. Therefore the design of a pilot gas supply system can readily control the valve inlet pressure at the valve opening as well as the amount of oxidizer supplied to a combustion chamber during the engine startup.

• Journal of the Korean Arthroscopy Society
• /
• v.10 no.2
• /
• pp.203-208
• /
• 2006

Purpose: Previous transtibial double bundle posterior cruciate ligament (PCL) reconstruction methods have several problems in graft length and tibial fixation. We introduce new surgical method that is less restrictive by graft length and is more stable with single tibial fixation. Operative technique: After diagnostic arthroscopy, we prepare the graft, ream the tibial tunnel and perform the procedure for TransFix tibial fixation. Femoral 2 tunnel is made and graft is passed via anteromedial (AM) portal. Tibial fixation is done and femoral 2 graft is fixed sequentially at each knee position. Conclusion: TtransFix tibial single fixation method in double bundle PCL reconstruction provides more stable fixation, more free graft selection and prevents graft damage by passing the graft via AM portal.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.21 no.3
• /
• pp.49-55
• /
• 2017

In this study, gas turbine engine inlet duct was designed to satisfy uniform flow at aerodynamic interface plane (AIP). Haack-series was selected as nose cone profile and duct outer radius($r_o$) was designed to satisfy to match with area change rate between the nose cone and outer duct wall by the 1-D sizing. The design object of the inlet duct wall profile which has the gradual area change rate was uniform Mach number in the core flow region and minimum boundary later thickness at the both inner nose wall and outer duct wall. The flow characteristics inside the inlet duct was evaluated using CFD. The static pressure distribution at the AIP showed uniform pattern within 0.16%. Based on Mach number profile, the boundary layer thickness was 2% of channel height. Kiel temperature rake location was decided less than 100 mm in front of nose cone where the Mach number is less than 0.1 in order to maximize the temperature probe recovery rate.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.21 no.4
• /
• pp.334-344
• /
• 2009

In the present paper, analytic solutions are derived for scattering of obliquely incident waves by a semi-infinite breakwater or a breakwater gap of partial reflection. In order to examine the appropriateness of the derived solutions, they are compared with the solutions derived by McIver in 1999 and Bowen and McIver in 2002 for a semi-infinite breakwater and a breakwater gap, respectively, in the case of perfect reflection. The derived analytic solutions are used to investigate the effect of reflection coefficient of the breakwater and wave incident angle upon the tranquility at harbor entrance. The tranquility is deteriorated by the reflected waves as the reflection coefficient increases and as the waves are incident more obliquely.

• Journal of the Korean Society for Railway
• /
• v.16 no.6
• /
• pp.454-459
• /
• 2013

Pressure waves are generated and propagate in a tunnel when train enters tunnel high speed. A compression wave due to the entry of train head propagates along the tunnel and is reflected at tunnel exit as an expansion wave. An expansion wave due to the entry of the train tail propagates along the tunnel and is reflected at tunnel exit as a compression wave. These pressure waves are repeatedly propagated and reflected at the tunnel entrance and exit. Severe pressure changes causes ear-discomfort for passengers in the cabin and micro pressure waves around the tunnel exit. It is necessary to analyze the transient pressure phenomena in tunnels qualitatively and quantitatively, because pressure change rate is considered as one of the major design parameters for optimal tunnel cross sectional area and repeated fatigue force on car body. In this study, we developed a characteristics method based on a fixed mesh system and boundary conditions for crossing trains and analyzed this system using an X-t diagram. The results of the simulation show that offsetting of pressure waves occurs for special entry conditions of a crossing train.