• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.30 no.2
• /
• pp.142-149
• /
• 2008

The purpose of this study was to evaluate histomorphometrically a toothash - plaster of Paris mixture associated with collagen membrane ($Bio-Gide^{(R)}$), regarding new bone formation in the peri-implantitis defects in dogs. Three mandibular molars were removed from 1-year-old mongrel dogs. After 2 months of healing, 2 titanium implants with sandblasted with large grit and acid etched (SLA) surface were installed in each side of the mandible. Experimental peri-implantitis was induced with ligatures after successful osseointegration. Ligatures were removed after identification of bone defect beneath the level of 5th thread of fixture on radiographic image. The mucoperiosteal flaps were elevated and the contaminated fixtures were treated with chlorhexidine and saline. The bone defects were assigned to one of the following treatments: no guided bone regeneration (GBR) procedure (group 1), GBR with Bio-$Oss^{(R)}$ and Bio-$Gide^{(R)}$ (group 2), or GBR with toothash - plaster of Paris mixture (TPM) and Bio-$Gide^{(R)}$ (group 3). The dogs were sacrificed after 8 or 16 months. The mean percentages of new bone formation within the limits of the 5 most coronal threads were $17.83{\pm}10.69$ (8 weeks) and $20.13{\pm}13.65$ (16 weeks) in group 1, $34.25{\pm}13.32$ (8 weeks) and $36.33{\pm}14.21$ (16 weeks) in group 2, and $46.33{\pm}18.39$ (8 weeks) and $48.00{\pm}17.78$ (16 weeks) in group 3, respectively. The present study confirmed statistically considerable new bone formation within the threads in group 3 compared with group 1 at 8 and 16 weeks (P<0.05). Although, data analysis did not reveal significant differences between group 2 and 3, the latter showed better results during the period of 8 or 16 weeks. Our findings support the effectiveness of TPM as a GBR material in the treatment of peri-implantitis bone defect.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.34 no.1
• /
• pp.53-61
• /
• 2007

In case of missing tooth caused by dental caries or periodontal disease, it can be restored by various methods, and there has been much interest in implant and tooth transplantation. The success of tooth transplantation is going to be attained through the knowledge of growth, development and calcification of tooth. Tooth transplantation has been experimented in vivo and in vitro. Many animals such as rats, mice, cats and dogs are used for tooth transplantation experiment in vivo. In most experiments, tooth was transplanted into the extraoral site, but rare into the intraoral site In this study, to observe the capacity of formation and mineralization of tooth germ, first molar of a matured white rat was extracted and the cap stage tooth germ of a 13.5 Embryonic day embryo rat was transplanted into the extracted socket. The rats were killed 6 months later and the radiographical and histological results are as followings. 1. Tooth germ transplanted for 2 and 6 months are developing calcified tooth material such as dentin, cementum, pulp tissue, and epithelium around enamel space in the maxilla was seen. 2. The epithelium around enamel space was located beneath the oral epithelium and contained connective tissue and periodontal ligament. 3. Tooth formation was progressed as transplantation period but the size of newly formed tooth was small and the shape of tooth was incomplete.

• Journal of dental hygiene science
• /
• v.15 no.2
• /
• pp.106-112
• /
• 2015

This study was conducted to provide with baseline data with the purpose of increasing the values of medical services. Self-administered questionnaire survey was conducted on 236 patients at a dental clinic follow-up visit in dentist clinic Gyeongnam area from June 2013 to August 2013. All statistical analyses were performed using SPSS. The motivation visiting the dental clinic is that the first one is introduction from the family and friends, the second is accessibility, the third is conspicuity and the last one is awareness of the dentist. The main variables in the process of treatment are service system, kindness, satisfaction of service, efficient of re-call system. The relief of discomfort at revisit show the highest score in the process of implant treatment and intention of revisit hereafter do in the prostheses process. In the correlation between main variables, service system and relief of discomfort at revisit (r=0.440, p<0.001), kindness and satisfaction of medical service (r=0.675, p<0.001), revisit hereafter and satisfaction of service (r=0.387, p<0.001) and efficiency of re-call system and revisit showed the highest correlation. The influence on satisfaction of dental service show meaningful level in kindness (p<0.001) and efficiency of re-call system (p<0.05). The intention of revisit is affected meaningfully by relief of uncomfort (p<0.05), service system (p<0.05), kindness (p<0.01) and efficiency of re-call system (p<0.01). In summary, the personal network of patients is most important variable at intention for revisit of dental clinic. As satisfaction of kindness and efficiency of re-call system is higher, satisfaction of medical service and intention for revisit are shown higher. Therefore further research for improvement of satisfaction for medical service and of intention of revisit at the dental clinic should be carried out.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.35 no.3
• /
• pp.160-169
• /
• 2019

Purpose: The purpose of this study was to evaluate the antimicrobial effects of a toothbrush with light-emitting diodes (LEDs) on periodontitis-associated dental biofilm attached to a zirconia surface by static and dynamic methods. Materials and Methods: Zirconia disks (12 mm diameter, 2.5 mm thickness) were inserted into a 24-well plate (static method) or inside a Center for Disease Control and Prevention (CDC) biofilm reactor (dynamic method) to form dental biofilms using Streptococcus gordonii and Fusobacterium nucleatum. The disks with biofilm were subdivided into five treatment groups-control, commercial photodynamic therapy (PDT), toothbrush alone (B), brush with LED (BL), and brush with LED+erythrosine (BLE). After treatment, the disks were agitated to detach the bacteria, and the resulting solutions were spread directly on selective agar. The number of viable bacteria and percentage of bacterial reduction were determined from colony counts. Scanning electron microscopy (SEM) was performed to visualize alterations in bacterial morphology. Results: No significant difference in biofilm formation was observed between dynamic and static methods. A significant difference was observed in the number of viable bacteria between the control and all experimental groups (P < 0.05). The percentage of bacterial reduction in the BLE group was significantly higher than in the other treated groups (P < 0.05). SEM revealed damaged bacterial cell walls in the PDT, BL, and BLE groups, but intact cell walls in the control and B groups. Conclusion: The findings suggest that an LED toothbrush with erythrosine is more effective than other treatments in reducing the viability of periodontitis-associated bacteria attached to zirconia in vitro.

• Journal of dental hygiene science
• /
• v.16 no.6
• /
• pp.481-487
• /
• 2016

The elderly population with dementia is rapidly growing in South Korea. The aim of this study was to investigate the relationship between dementia and oral health in 197 subjects aged ${\geq}65$ years. The questionnaire included questions on subjective health status, subjective health concern, subjective oral health status and behavior, mastication ability, Oral Health Impact Profile-14 (OHIP-14), and Korean Dementia Screening Questionnaires (KDSQ). Oral examination was conducted by a single dentist to evaluate upper or lower denture use, and determine the numbers of remaining and functioning teeth, including implant and fixed prosthesis. The subjects who required a dementia test (KDSQ-C [cognition] of ${\geq}6$) had significant differences in systemic disease prevalence rate, subjective health status, subjective health concern, KDSQ-V (vascular disease) score, KDSQ-D (depression) score, subjective oral treatment need, key food mastication ability and OHIP-14 score compared to the healthy subjects. The proportion of denture wearers, total remaining teeth, total functioning teeth, toothbrushing frequency, oral pain severity, symptoms of periodontal disease, subjective oral health status, and subjective oral health concern showed no significant differences between the two groups. KDSQ-C and OHIP-14 scores showed a strong positive relationship, while KDSQ-C score and total remaining teeth or key food mastication ability showed a weak negative relationship. In the multiple regression analysis, the KDSQ-D, KDSQ-V, and OHIP-14 scores influenced the KDSQ-C scores. We suggest a relationship between oral health and cognitive impairment.

• The Journal of Korean Academy of Prosthodontics
• /
• v.53 no.1
• /
• pp.19-25
• /
• 2015

Nowadays, CAD/CAM is broadly used in dentistry for inlays, crowns, implant abutments and its spectrum is expanding to complete dentures. Utilizing CAD/CAM to fabricate complete dentures is expected to decrease chair time and the number of visits, thus decreasing total fabrication time, expenses and errors caused during fabrication processes. One of the systems using CAD/CAM, DENTCA$^{TM}$ CAD/CAM denture (DENTCA Inc. Los Angeles, USA) scans edentulous impressions, designs dentures digitally, fabricates try-in dentures by 3D printing and converts them into final dentures. Patients can wear final dentures after only 2 - 3 visits with satisfying adaptation. This case report introduces a 71-year-old male patient who visited to consult remaking of existing old dentures. Residual teeth with bad prognosis and root remnants were extracted and the patient used reformed existing mandibular denture for 2 months. And then DENTCA system started. One-step border molding was done using conventional tray of adequate size provided by DENTCA system and wash impression was taken. Gothic arch tracing was completed based on the vertical dimension of existing dentures. Both maxillary and mandibular trays were placed to the resultant centric relation and bite registration was taken. Then DENTCA scanned the bite registration, arranged the teeth, completed the festooning and fabricated the try-in dentures by 3D printing. The try-in dentures were positioned, occlusal plane and occlusal relations were evaluated. The try-in dentures were converted to final dentures. To create bilateral balanced occlusion, occlusal adjustment was done after clinical remounting using facebow transfer. The result was satisfactory and it was confirmed by patient and operator.

• The korean journal of orthodontics
• /
• v.31 no.5 s.88
• /
• pp.517-523
• /
• 2001

Titanium miniscrews we being used increasingly as an anchorage for tooth movement, because they ate easy to place and to remove, increase the number of sites available, give minimum strain to patients regarding surgical procedures, and offer uneventful healing alter removal. The use of titanium miniscrews as an orthodontic anchorage has been reported in clinical case reports, but clinicians have experienced screw loosening when using such screws.' To our knowledge, there are no published reports evaluating the stability of miniscrews. Information about the length of miniscrews used in relation to the location is of some importance, as stability will vary depending on bone duality The purpose of this study was to evaluate a variety of Lengths of miniscrews (dimeter: 2mm) which were inserted in maxilla or mandible and to demonstrate in a dog model which miniscrew provides fundamental stability in the jaws. 10 mm long miniscrews in the maxilla and 8mm long: miniscrews in the mandible showed no clinical mobility and retained their position throughout an 8 weeks force (200g) application. The mucosal condition around the screws was healthy in cases in which miniserews were inserted in the alveolar bone between the roots and the head of the screws emerged into the attached gingiva. When the force application was terminated, radiographic analysis revealed neither rent resorption not periodontal pathology around the miniscrews that remained stable during the entire treatment period. This study suggests that if titanium miniscrews with adequate length are properly used depending on the location, they provide sufficient stability for orthodontic anchorage.

• Journal of Oral Medicine and Pain
• /
• v.35 no.1
• /
• pp.31-39
• /
• 2010

This study is to observe the bacteriocidal effect of the Low Level Laser (LLL) against oral microorganisms which are related to the occurrence of periodontal diseases and oral malodors. The Porphyromonas gingivalis 2561 (P. gingivalis 2561) and Prevotella intermedia (Pr. intermedia) were treated with photosensitizing substance-toluidine blue O (TBO; C.I. 52040) and then radiated with the LLL which has 650nm wavelength for 1, 2, 3 and 5mins. continuously upon varying distances of 1, 2 and 3cm for each experimental groups. The results are as follows; 1. The P. gingivalis 2561 which was treated with TBO and then radiated with LLL at a distance of 3cm for 1min. showed 99.99% higher antibacterial effect in comparison to the experimental group treated only with TBO. 2. The Pr. intermedia which was treated with TBO and then radiated with LLL at a distance of 3cm for 1min. showed 99.8% higher antibacterial effect in comparison to the experimental group treated only with TBO. 3. The bacteriocidal effect of the P. gingivalis 2561 treated with TBO was found to gradually increase as the radiation time of LLL extended from 1min. to 3min. at 1min. intervals. 4. A slight decrease in bacteriocidal effect of the P. gingivalis 2561 was found as the radiation distance of LLL increased from 1cm to 3cm at 1cm intervals. 5. The bacteriocidal effect of the Pr. intermedia was found to slightly decrease as the radiation distance of LLL increased from 1cm to 3cm at 1cm. intervals. As the results shown above suggest, the bacteriocidal effect of LLL was found to increase as the radiation time extended and the distance shortened. Moreover, even the experimental group radiated with LLL at 3cm distance for 1min. which showed the lowest level of bacteriocidal effect, was found to have 99.8% higher bacteriocidal effect than the experimental group which was treated only with TBO and, therefore, this clearly shows the bacteriocidal effect of LLL against oral microorganisms. Thus, the use of LLL is thought to become very useful for suportive treatment for periodontitis and implantitis, and controlling oral malodors as long as it is used within the limits where there is no side effect.