• Journal of the Korea institute for structural maintenance and inspection
• /
• v.8 no.4
• /
• pp.247-256
• /
• 2004

The damage curves for the 2-story shear building to the impulsive rectangular loads were established with the peak load and Impulse ratio producing the critical displacement. The convolution integrations with the Impulse response matrix and the loads were used to find the responses of the building. The impulse response matrix required in the calculations of the convolution integration were found with the mode superposition method It is shown from the established damage curves that the responses of the top and bottom floor are sensitive to the magnitude and the impulse of the loads respectively.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2001.10a
• /
• pp.688-692
• /
• 2001

본 논문에서는 무선 통신로 환경에서 발생하는 페이딩 현상과 전자기기에서 방출되는 임펄스성 전자간섭파에 따른 MC DS-CDMA와 DS-CDMA 시스템의 성능을 비교 분석하였다. 결과에 의하면, 페이딩과 임펄스 전자간섭파에 의해 시스템에 심각한 영향을 미치게 되는데 특히, 직접파 성분이 존재하는 페이딩 보다는 임펄스 전자간섭파의 발생빈도와 크기에 따라 두 시스템 성능이 크게 좌우됨을 알 수 있었다. 이에 대한 성능개선 기법으로 다이버시티 기법과 BCH(15, 7) 부호화 기법을 적용하여 직접파가 존재하는 페이딩과 강한 임펄스 간섭 환경에서도 만족할 만한 성능을 얻을 수 있었다.

• Proceedings of the KIEE Conference
• /
• 2003.07d
• /
• pp.2657-2659
• /
• 2003

전력선 통신(Power-Line Communication)에 있어서 패널의 임펄스 응답은 송수신 신호의 기본적인 전달 특성이라는 점에서 매우 중요한 채널 특성이며, 채널 구성 요소들의 물리적 구조 및 각종 부하 기기들에 따라 다양하게 변화하기 때문에, 적절한 측정과 분석 및 대응이 요구된다. 이에 본 논문에서는 채널 임펄스 응답 측정에 대한 광대역 측정 방식과 협대역 측정 방식을 검토하고, 각 방식을 테스트 베드 상에서 구현하여 임펄스 응답 측정 결과를 상호 비교하고, 그 신뢰성을 확인하였다. 또, 실제 전력선 채널 환경에서 PN 시퀀스를 이용한 광대역 측정 방식의 장점을 고려하여, 국내 일반적인 저층 아파트를 대상으로 임펄스 응답 측정을 수행하고 결과를 분석하였다.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.13 no.3
• /
• pp.101-108
• /
• 1999

Ths paper describes the transient response characteristics of the grounding systems for electric power facilities against impluse currents. In this work, when the impulse current was injected through the grounding conductor for arrester, the investigations treasuring and analyzing potential rises induced at the cormron cormection trint and other grounding conductors were conducted. The lightning impulse current was awliErl so as to simulate the on-set of arrester due to lightning surges. Measured results of impulse response characteristics from the present experinrrits are as follows;

• Proceedings of the KIEE Conference
• /
• 2005.07a
• /
• pp.72-74
• /
• 2005

전력선통신은 현재 홈 네트워크 및 검침기술과 같은 다양한 분야에서 활발하게 응용이 되고 있는 기술이다. 이러한 전력선 통신을 위한 전송선로는 통신을 위한 정보데이터를 전송하는 기능과 더불어 선로상의 전력 부하들을 위한 전력 공급용으로서의 용도도 가지고 있다. 그러므로 선로상의 부하변동은 다양한 형태의 임 펄스 잡음을 야기 시키고 이러한 임펄스성 잡음은 전송 데이터에 군집에러를 발생시킴으로써 통신성능을 크게 열화 시키는 요인이 되고 있다. 따라서 효율적인 전력선 통신시스템을 위해서는 전력 선로상의 임펄스 잡음의 특성을 명확히 분석하고, 그에 따른 에러제거기법을 적용하는 것이 필수적이라고 할 수 있다. 이러한 관점에서 본 논문에서는 새롭게 가정의 전력 선로에 연결되는 부하들의 동작 및 변동에 따른 임펄스 잡음 특성을 다양한 부하의 유형별로 디지털 하드웨어를 이용하여 실측 및 분류한 후, 새롭게 도출한 임펄스 잡음 모델을 기반으로 순방향 오류정정방식(FEC;Forward Error Correction)인 컨벌루션 부호화(Convolution Coding) 및 인터리빙(Interleaving) 방식을 가미하여 시스템의 비트오율 개선효과를 확인하였다. 본 논문에서 수행된 새로운 실측기반의 임펄스 잡음이 반영된 채널부호화 방식에 의한 성능평가 결과는 향후 홈네트워크기반의 전력선 통신시스템의 실질적인 참고데이터로서 유용하게 활용되리라 기대된다.

• Journal of Advanced Navigation Technology
• /
• v.7 no.1
• /
• pp.30-37
• /
• 2003

In this paper, we have analyzed the BER (Bit Error Rate) performance of MC-CDMA systems under indoor wireless environment with class A impulsive noise suggested by Middleton. For the performance evaluation, we considered from strong to weak impulsive noise characteristics. And we have evaluated the degree of performance improvement by using turbo code as a compensation technique to impulsive noise. From the result of analysis, it is found powerful performance improvement scheme must be adopted in the system under impulsive noise environment, and when turbo code scheme is adopted, system BER performance is improved by the $10^{-2}$. As the impulsive noise characteristics approaches AWGN characteristics, the degree of performance improvement by adopting turbo code become larger.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.23 no.4
• /
• pp.79-85
• /
• 2009

This paper describes the degradation properties of ZnO surge arresters impressed by lightning impulse currents. To investigate the deterioration behaviors of ZnO surge arresters due to lightning surges, the 8/20[${\mu}s$], 2.5[kA] standard lightning impulse currents were injected to the ZnO surge arrester under test. The power frequency AC and DC leakage currents flowing through the ZnO surge arresters with and without the injection of lightning impulse currents were measured. As a result, the leakage currents are increased and the asymmetry of the AC leakage current is pronounced as the number of injection of the impulse current increases. The ZnO grain of the surge arrester without the injection of lightning surges are uniform but the ZnO grain of the ZnO surge arrester with the injection of lightning impulse currents are deformed. Also, it was found that the decrease of the $Bi_2O_3$ due to the lightning impulse current leads to the lack of grain boundary layer and the current concentrated by the lack of grain boundary layer play an important role to degrade nonlinear property of ZnO surge arrester blocks.

• Journal of Advanced Navigation Technology
• /
• v.10 no.1
• /
• pp.13-19
• /
• 2006

In this paper, Gaussian impulse generator for DS-UWB was proposed and fabricated so that the frequency band allocated to WLAN, around 5 GHz, was suppressed in accordance with the regulation of radiation spectrum limitation defined by FCC. In order to transform an unipolar rectangular signal to a Gaussian impulse, the proposed impulse generator consists of two stage impulse generation parts; the first stage using dual SRD and the second stage using gain switching of semiconductor laser diode. The result shows a gaussian impulse as narrow as 180 psec in width. In addition, high order derivative Gaussian filter with a structure of 4 stage ring resonators was designed and fabricated so that DS-UWB impulse generator could reduce the frequency spectrum of WLAN by 25 dB compared to the spectral power of th adjacent UWB band.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.16 no.5
• /
• pp.362-368
• /
• 2023

In this paper, we presented the characteristics of the impulse signal which is applicable to the ultra-wideband antennas. In general, the width of the impulse has around sub nano or pico seconds in the time domain, where it corresponds to the wideband in the frequency domain. We confirmed by experiment that the impulse has around 130ps of the pulse width and bandwidth of 4GHz when 10MHz of sine wave excited as an input pulse. The fidelity factor was calculated in the time domain and -10dB bandwidth in the frequency domain was investigated for resistively loaded dipole antennas with different resistance per unit length. The received impulse signal through the wideband antennas is confirmed in the time and frequency domains that received pulse is to be similar to the generated impulse. The fidelity and bandwidth of the quantity value are 0.98 and 3.4GHz, respectively.

• Proceedings of the Korean Institute of Communication Sciences Conference
• /
• 1994.06a
• /
• pp.163-166
• /
• 1994