• Aerospace Engineering and Technology
• /
• v.9 no.2
• /
• pp.123-128
• /
• 2010

Science and Technology SATellite-3 (STSAT-3) is science purpose satellite which weighs below 170kg. This is classified as small satellite or micro satellite more specifically. The launch vehicles (launchers) for small satellite has their own requirements for environmental interface. Since the small satellites are usually launched with cluster or multiple payloads, the selection option for appropriate launcher is limited. Therefore, the satellite should be designed with the consideration of environmental requirements of these launchers. In this paper, the environmental requirement of most candidated launchers for small satellite is summarized and give satellite environmental requirement to accommodate all launchers requirements.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.19 no.10
• /
• pp.1069-1074
• /
• 2009

A sub-domain method for free vibration analysis of arbitrarily shaped, concave membranes with a deep groove is proposed in the paper. The proposed method divides the concave membrane of interest into two convex regions. The vibration displacement(approximate solution) of each convex region is assumed by linearly superposing plane waves generated at edges of the region. A sub-system matrix for each convex region is extracted by applying a provisional boundary condition to the approximate solution. Finally, a system matrix, which of the determinant gives eigenvalues of the concave membrane, is made by considering the fixed boundary condition(displacement zero condition) at edges and the compatibility condition(the condition of continuity in displacement and slope) at the interface between the two regions. Case studies show that the proposed method is valid and accurate when the eigenvalues by the proposed are compared to those by NDIF method, FEM, or the exact method.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.20 no.1
• /
• pp.43-48
• /
• 1984

The transfer matrix method is well-known and extensively used for finding solutions in vibration problems. At the final stage of this method natural frequencies are obtained by a trial and error search procedure. In this paper authors presented the method which needed only a few division number to yield an accurate solution and the most effective method to get an approximate solution in the case of beam vibrations. The methods which were presented by authors could be applied for the beam with nonuniform section and uniformly distributed load, and the values of numerical calculations by these methods have just agreed with those of experiments.

• Journal of Korean Society of Steel Construction
• /
• v.13 no.1
• /
• pp.61-69
• /
• 2001

The specially orthotropic plate theory is used for analysis of panels made of girders and cross-beams. The cross-sections of both girders and cross-beams ar H-type. A method of calculating natural frequencies corresponding to the modes of vibration of beams and tower structures with irregular cross sections and arbitrary boundary conditions was developed. The results of application of this method to steel bridge by using specially orthotropic plate theory is presented. The result is compared with that of the beam theory. Finite difference method is used for this purpose. The influence of the $D_{22}$ stiffiness on the natural frequency is rigorously investigated. According to numerical examination given in this paper the result by the plate theory is 2.43 times stiffer than of beam theory.

• Proceedings of the KSME Conference
• /
• 2005.11a
• /
• pp.184.2-184.2
• /
• 2005

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.9 no.3
• /
• pp.360-366
• /
• 1985

본 연구에서는 주구조물의 진동이 관심있는 주파수 범위내에서 1 자유도계로 근사화될 수 있는 경우, 임의로 선택된 점탄성재료에 대하여 최적튜닝 및 최적댐핑효 과를 얻을 수 있도록 그 형상을 설계하고, 예비변형율을 조절하는 절차를 제시하고, 제안된 방법론을 외팔보와 집중하중으로 구성되는 1 자유도계 및 선반의 공구대에 적 용하여 공진감쇠 및 채터억제효과를 살펴 보았다.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2001.11b
• /
• pp.877-881
• /
• 2001

In this paper, a model is developed that can predict insulation performance of sound barrier systems under the action of multiple random point impact. The predicted results are compared with the measured results obtained by using APAMAT II. The results show the error due to the difference between experimental environment and theoretical assumptions. The model is needed to be improved to obtain better agreement between predicted and measured results.

• The Journal of the Acoustical Society of Korea
• /
• v.20 no.7
• /
• pp.21-30
• /
• 2001

The analysis system implementing a serial process from structural vibration to sound radiation has been developed using both the power flow finite element method (PFFEM) known as a new vibrational analysis technique in medium to high frequency ranges and the acoustic boundary element method (BEM) which is effective in analyzing the sound radiation problems. The vibration analysis for arbitrary shape structures composed of plates is performed, and using the vibration energy density obtained from this analysis as the velocity boundary conditions for an acoustic analysis, vibro-acoustic analysis has been processed. To verify the developed system, we select a simple structure model and compare the results of developed system with those of SYSNOISE, and also the developed system is applied for the vibro-acoustic analysis of various structures in shapes.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.11 no.6
• /
• pp.371-378
• /
• 1986

In the reflection and transmission of a transverse magnetic wave(TM wave) from a dielectric plane osillating sinusoidally perpendicular to ist surface, one could assume that the boundary moves with a uniform nelocity equal to the instantaneous socillating velodity. According to the extended Lorentz transform, the reflected and the transmitted field are obatained as the function of the dielectric permittivity, the oscillating velocities, and the incident angles. The above results are analyzed graphically.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.10 no.4
• /
• pp.193-200
• /
• 1985

In the reflection and transmission of a plane wave(TE) from a dielectric plane surface oscillating sinusoidally perpendicular to its surface, one could assume that the boundary moves with a uniform velocity equal to the instantaneous oscillating velocity. The reflected and the transmitted fields are obtained as the function of the incident angles, the dielecri'c permittivity, and the oscillating velocities according to the extended Lorentz transform.