• Journal of the Korean Wood Science and Technology
• /
• v.30 no.4
• /
• pp.96-105
• /
• 2002

Shear wall is the most important component resisting lateral loads imposed to a building by wind or earthquake. In shear walls, lateral load applied to framing is transmitted to sheathing panel through nailed joints between sheathing and framing so that the load is resisted by in-plane shear strength of sheathing. Therefore, nailed joints are the most basic and important component in the viewpoint of stiffness and strength of shear walls. In this study, stiffness and strength of single nailed joint were measured by single shear tests of nailed joints and used as input for theoretical models developed to estimate racking behavior of shear walls. And shear walls were tested to check the accuracy of theoretical models estimating racking resistance of shear walls. Stiffness of nailed joint was affected by grain direction of stud but direction of sheathing panel had little effect. Behavior of nailed joint and shear walls under lateral loads could be represented by three lines. Theoretical model II was more accurate than theoretical model I in estimating racking behavior of shear wall under loads.

• Journal of the Korean Wood Science and Technology
• /
• v.31 no.2
• /
• pp.38-44
• /
• 2003

This study was carried out to evaluate the feasibility of using HDF as surface panels as well as core materials for flush door manufacturing. Six core constructions were developed and applied to manufacture door specimens and conventional skin door specimen was also manufactured for comparison. Door specimens were tested under changing interior environmental condition for 3~4 months during winter and summer seasons. During the test period, deformation of doors were measured weekly, and temperature and relative humidity of testing area were also recorded. From this study, it was concluded that HDF can be used to manufacture quality flush doors and core construction developed in this study showed good quality compared to conventional skin door. Deformation of doors increased as temperature and relative humidity of the surrounding environment increased. Flush doors generally showed less deformation than skin doors, and evaluated to be stable and good quality when compared to skin door.

• Journal of the Korean Wood Science and Technology
• /
• v.30 no.4
• /
• pp.58-65
• /
• 2002

This research was carried out to develop field treatment techniques of thinned small diameter softwood logs and less utilized hardwood logs using sap displacement method. In this paper, we report the feasibility of using transpiration method and butt-end method for the treatment of three softwood species and three hardwood species with preservatives, fire-retardant chemicals, and dimensional stabilizer. Butt-end method was effective as a field treatment technique compared to transpiration method when considered the treatability, easiness of treatment, productivity of treated wood, and environmental aspects related to chemical treatment, regardless of the combination of wood species and chemicals.

• Journal of the Korean Wood Science and Technology
• /
• v.31 no.1
• /
• pp.46-51
• /
• 2003

The feasibility of using bleaching treatments for removing fungal stain was evaluated on heavily stained raiadta pine sapwood. Sodium chlorite and sodium hypochlorite appeared to destain fungal discoloration by providing proper treatment conditions (chemical concentration, treatment temperature, and treatment time), while hydrogen peroxide did not remove fungal stain under the bleaching regimes evaluated. The addition of sodium silicate and sodium hydroxide in the hydrogen peroxide solution as a buffer could remove fungal discoloration completely; however, the color of wood surface turned faint green after bleaching, thereby reducing the lightness of bleached samples. The results suggest that hydrogen peroxide bleaching could be a feasible method for removing fungal discoloration of stained radiata pine sapwood, although further research is needed to solve the problem of color change after bleaching. Also, further tests under field conditions are recommended.

• Journal of the Korean Wood Science and Technology
• /
• v.30 no.4
• /
• pp.1-7
• /
• 2002

This study deals with physical properties of Larch(Larix kaemferi Carr.) treated by steaming at temperatures above 100℃. Treatment conditions of this experiment were operated at regular intervals of 10℃ at temperature up to 130℃ for 10, 30 and 60 minutes by using the auto-clave. The Bending strength and compressive strength along the grain were slightly decreased with increasing the treating temperatures. There was no significant relations between wood strength and steaming temperatures. At the range from 120℃ to 130℃ of steaming temperature, it was considered that the change of composition and structure in cell wall was changed due to release of stresses. Water absorption characteristics were not affected by steaming temperature. In this experiment limits, it was concluded that physical properties of wood by steaming treatment were affected more largely by wood density than by treating temperature.

• Journal of the Korean Wood Science and Technology
• /
• v.32 no.2
• /
• pp.90-95
• /
• 2004

Pitch pine (Pinus rigida) has been planted in Korean forests for several decades, primarily for erosion control and use as a fuel supply. To enhance its value, and especially potential use as lamina for structural glued laminated timber (glulam), log quality and lumber yield of pitch pine were evaluated in this study. Trees from pure pitch pine stands with an average diameter at breast height of 32 cm were felled and bucked into 3.6m long 15 cm minimum butt-end diameter logs. Over 80% of the logs were classified to No.2 or No.3 visual grade group. Upon sawing total lumber yield was 55.2%, 39.9% for structural glulam lamina, 7.2% for louver, and 8.1% for miscellaneous use. The final lumber yield for manufacturing structural glulam, after cross-cutting to eliminate knots and finger jointing, was only 15.3%. To enhance this manufacturing yield requires that the rate of knot-included lumber used as lamina be raised. However arrangement of the knot-included lamina, whose mechanical properties need to be accurately evaluated, must be optimized to minimize any reduction to the structural glulam strength. The log quality and lumber yield of pitch pine evaluated in this study are expected to facilitate proper planning for wood product manufacture in the Korean lumbering and glulam industrial field, which has not previously dealt with this species.

• Journal of the Korean Wood Science and Technology
• /
• v.19 no.2
• /
• pp.3-13
• /
• 1991

D-xylose 는 임산 바이오마스의 화학석 조성분 증 셀룰로오스와 리그닌 다음으로 가장 많이 존재하는 성분이다. 그럼에도 불구하고 D-glucose만큼의 연구가 진행되지 못해왔다. 단지 xylitol, furfural 및 xylonic acids탐의 몇가지 산으로 전환시켜 이용될 뿐이다. 이런 이유는 D-xylose를 공업적으로 다량 추출하는 방법과, 특히 정선 방법에 어려운 문제점이 있기 때문이다. 그러므로 본 총설에서는 D-xylose를 보다 경제적으로 분리하는 방법과 D-xylose를 에탄올로 발효시키는 과정중의 제 문제점들에 관해 기존에 발표된 논문들을 정리하고저 한다. 즉 공업적으로 D-xylose를 다량 분리시키는 방법으로서 해섬/추출 폭쇄/추출, 초산펄핑, 전기가수분해 방법들이 논의 되었으며, 분리된 D-xylose를 에탄올로 발효시킬 경우 D-xylose의 대사, 발효 조건들의 영향, 헤미셀룰로오스 가수분해물의 발효, 발효의 전망과 문제점등이 포함되었다.

• Journal of Forest and Environmental Science
• /
• v.27 no.3
• /
• pp.183-194
• /
• 2011

This study reviewed on the research trend of sources and utilization of the byproducts(Lignin) from bioethanol production process with lignocellulosic biomass such as wood, agri-processing by-products(corn fiber, sugarcane bagasse etc.) and energy crops(switch grass, poplar, Miscanthus etc.). During biochemical conversion process, only Cellulose and hemicellulosic fractions are converted into fermentable sugar, but lignin which represents the third largest fraction of lignocellulosic biomass is not convertible into fermentable sugars. It is therefore extremely important to recover and convert biomass-derived Lignin into high-value products to maintain economic competitiveness of cellulosic ethanol processes. It was introduced that lignin types and characteristics were different from various isolation methods and biomass sources. Also utilization and potentiality for market of those were discussed.

• Journal of the Korean Wood Science and Technology
• /
• v.30 no.2
• /
• pp.128-133
• /
• 2002

This study was conducted to investigate the influence of storage time on the sapstain development of Japanese red pine and Korean pine logs during storage in log yard, and their stain characteristics. Japanese red pine and Korean pine trees were harvested and cut into logs in mid January of 2001. These logs were transported to the two local sawmills where they were closely stacked in remote parts of log yard. The logs were then sampled destructively by cutting seven to nine 3-cm long discs along the length of each log at intervals of 3, 4, 5, 6, and 8 month after felling. The stain coverage and maximal radial penetration of stain were measured from the discs of the sampled logs after the isolation of causal staining fungi. The sapstain was primarily infested by the attack of bark beetles and the species of bark beetle was identified as Tomicus piniperda. The main fungal species isolated from stained wood was Ophiostoma species. Based on the present study, the logs could be stored in log yard until May without stain; but stain development was rapid after May and the severity of stain increased proportionally with storage time. Korean pine was more susceptible to fungal stain than Japanese red pine. During summer storage, decay started to develop in logs and the main species were identified as Tyromyces sp. and Schizophyllum commune. Information provided in this paper would be very useful to develop more effective control strategies for sapstain prevention in Japanese red pine and Korean pine logs.

• Journal of Korean Society of Forest Science
• /
• v.111 no.2
• /
• pp.242-250
• /
• 2022

Here we aimed to date the year and season of the resin collection from Korean red pines at Worak mountain and investigate the natural healing ability of the wounds using the tree-ring analysis technique. We determined the dating of the resin collection based on the synchronization between the ring-width time series from the wound surface of the experimental trees and the local master chronology, which is the mean time series from the sound surface on the opposite side of the wounds. For the dating of resin collection, we selected thirteen Korean red pines with resin wounds. For the investigation on the annual healing ability of the wounds, we sampled three dead trees out of 13 trees as disks. Through the comparison of the individual ring-width time series from the wounds with the local master chronology, it was verified that the resin collection was undertaken between the spring of 1962 and the autumn of 1975. The mean healing length of the wounds was 15.8 cm over the preceding 42 years, making their annual mean healing 0.38 cm. Through our study we successfully verified the healing ability of the wounded Korean red pines for the resin collection as well as the undocumented resin collection history.