• 한국공간정보시스템학회:학술대회논문집
• /
• 2007.06a
• /
• pp.169-174
• /
• 2007

식생지수 시계열 자료를 이용한 식생 및 토지피복 모니터링을 수행하기 위해서는 구름으로 인한 누락 및 왜곡된 식생지수 문제를 먼저 해결해야만 한다. 특히 한반도와 같이 여름철 집중 호우기에 대부분의 영상에 구름이 존재하는 경우 이들 구름화소를 제거하거나 복원하지 않을 경우, 분석 결과에 상당한 왜곡이 발생하거나 특정 시기의 영상자료를 분석에 반영할 수 없는 경우가 발생하게 된다. HANTS 알고리즘은 이 같은 구름 화소 문제를 해결하기 위한 알고리즘으로 연중 식생지수의 변화는 비교적 단순한 반복적 주기함수의 형태를 가지므로 소수의 cos 함수를 이용한 푸리에 근사식으로 전체 연중 식생지수를 표현할 수 있다는 가정에서 출발한다. 이 때 구름화소로 인한 원식생지수와의 차이가 특정 임계값을 초과하였을 경우 해당 관측치를 근사과정에서 제외함으로써 구름의 영향을 받지 않은 식생지수 시계열 자료만을 이용하게 된다. 이 과정을 수행하기 위해서는 몇몇 제어변수의 설정이 필요한데, 본 연구에서는 한반도와 같이 특정 시기에 장기간 구름이 분포하는 상황에서 최적의 식생지수 복원을 위한 HANTS 알고리즘의 제어변수를 선정하고 재구축된 식생지수를 평가하였다. 이를 위한 실험으로 2002년 대전 지역의 MODIS Terra 식생지수 시계열 영상을 대상으로 HANTS 알고리즘을 주요 식생피복별로 적용해 보았다.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.49 no.9
• /
• pp.183-195
• /
• 2012

We propose a variable-latency Decimal Floating Point(DFP) adder which adopts the dual data path scheme. It is to speed addition and subtraction of operand that has identical exponents. The proposed DFP adder makes use of L. K. Wang's operand alignment algorithm, but operates through high speed data-path in guaranteed accuracy range. Synthesis results show that the area of the proposed DFP adder is increased by 8.26% compared to the L. K. Wang's DFP adder, though critical path delay is reduced by 10.54%. It also operates at 13.65% reduced path than critical path in case of an operation which has two DFP operands with identical exponents. We prove that the proposed DFP adder shows higher efficiency than L. K. Wang's DFP adder when the ratio of identical exponents is larger than 2%.

• Journal of the Korean Chemical Society
• /
• v.45 no.4
• /
• pp.293-297
• /
• 2001

The existing vapor pressure measurements reported in the literature for parahydrogen between the triple point and the critical point have been employed to establish the constants and exponent of the following equation in the form of reduced vapor pressure and reduced temperature: ln $lnP_r=2.64-{\frac{2.75}{T_r}}+1.48129lnT_r+0.11T^5_r$Only the normal boiling point ($T_b$= 20.268K), the critical pressure ($P_c$= 1292.81 kPa), and the critical temperature ($T_c$= 32.976K) are necessary to calculate the vapor pressure for an overall average deviation of 0.21% for 153 experimental vapor pressure data.

• Journal of the Korea Society of Computer and Information
• /
• v.12 no.3
• /
• pp.123-130
• /
• 2007

It is difficult to analyse images because of multiplicative characteristics of speckle noises in SAR images. In this paper. wavelet transform is proposed for restoring SAR images corrupted by speckle noise. The multiplicative noise is transformed into a form of additive noise and then the additive noise is denoised using wavelet thresholding selections such as VisuShrink, SureShrink, BayesShrink and modified BayesShrink. Experimental results on several test images show that the modified BayesShrink yields significantly superior image quality and better Peak Signal to Noise Ratio(PSNR).

• Journal of the Korean Magnetics Society
• /
• v.25 no.6
• /
• pp.180-184
• /
• 2015

We have investigated the magnetization reversal behavior in ferromagnetic $Co_{0.5}Fe_{0.5}$ alloy films using the magneto-optical Kerr microscope capable of the direct observation of time-resolved domain patterns. Interestingly enough, as the sample thickness increases the magnetization reversal behavior becomes changed from a single domain wall motion to the random nucleations of domains. Also, from the stochastic analysis of the domain jump sizes during the domain wall motion, it was found that the magnetization reversal behavior in the samples shows the critical scaling behavior with the critical exponent of ${\tau}{\sim}1.33$.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2012.10a
• /
• pp.703-704
• /
• 2012

• The Journal of Korean Association of Computer Education
• /
• v.18 no.2
• /
• pp.83-90
• /
• 2015

In an virtualization environment, several virtual machines use physical resources together. If a specific virtual machine uses to much of the computing resources, other machines may not be working properly. There are various method to solve this problem. Most representative study is to migrate a specified virtual machines to a different server, a target server. In this study, server load can be transferred to a target server by the remigrate of the load imposed on virtual machine. It is still problematic that virtual machine has to remigrate to a different server. This thesis has proposed the algorithm determining the remigration targets by applying dynamic thresholds to solve those problems. The migration algorithm applies dynamic thresholds according to the following criteria. Firstly, the usage of CPU, network and memory; secondly, decide the set of artificial machine and the target server based on the resources surpassed thresholds; thirdly, determine artificial machines based on the resource usage in the target server.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2015.05a
• /
• pp.628-628
• /
• 2015

유역의 형상은 강우, 산사태 등과 같은 지배적인 침식작용과 더불어 지형 지질학적 요인들에 의해 결정되어 진다. 그러므로 유역형상에 대한 공간특성 분석을 위해서는 지형학적 요인과 다양한 침식작용에 대한 분석이 필요하다. 국내 외 많은 연구결과에 의하면 지형학적 인자에 의한 침식 형태는 국부경사와 집수면적의 크기에 의해 다양한 구간으로 나뉘며, 그 특성에 따라 지표침식, 세굴, 산사태 등으로 구분되는 것으로 연구된 바 있다. 일례로 유역 내 세굴과 관련된 지배인자는 집수면적보다는 국부경사에 반대로 지표침식, 산사태는 국부경사보다는 집수면적의 크기에 따라 영향을 받는다. 따라서 지형학적 인자(국부경사, 집수면적)의 임계치(threshold) 산출을 통해 침식특성(불안정지역)을 검토할 수 있으며, 이에 대한 물리적 검증은 여러 연구를 통해 물질플럭스(유량, 에너지)에 대한 Power Law로써 검증된바 있다. 본 연구에서는 이러한 지형학적 침식특성 분석을 위하여 2006년 집중호우에 의해 광역적 산사태가 발생한 강원도 평창군 진부면 일대의 $10m{\times}10m$ DEM로부터 국부경사, 집수면적을 산출하고 경사-면적한계곡선(Slope-Area Threshold Curve, SATC), 배수면적 확률분포곡선(Probability distribution of Drain Areas Curve, PDAC), 에너지지수 확률분포곡선(Probability distribution of Energy Index Curve, PEIC)를 실제 산사태지점과 중첩하여 도시하였다. 그 결과, 특정 임계구간(Threshold Area, Unstable area, 2~3권역)내에서 산사태 발생지점이 분포하는 것으로 분석되었다. 이를 통해 지형학적 인자만을 고려하여 미계측 유역에 대한 잠재적 불안정지역의 판별이 가능할 것으로 판단되며, 추후 광역적 사면안정해석에 적용 가능할 것으로 판단된다.

• Tunnel and Underground Space
• /
• v.24 no.1
• /
• pp.67-80
• /
• 2014

Long-term stability and delayed failure of granite were evaluated through the laboratory test based on Wilkins method and Brazilian disc test (BDT) which yields tensile strength, mode I fracture toughness and subcritical crack growth parameters. Then, the long-term strength of granite was estimated by using analytical models and long-term stability of compressed air-energy storage (CAES) pilot cavern pressurized up to 5 ~ 6 MPa was evaluated using numerical code, FRACOD with the determined subcritical crack growth parameters. The results of test and analyses showed that the subcritical crack growth index, n was determined as 29.39 and the inner pressure of 5 ~ 6 MPa had an insignificant effect on the long-term stability of pilot cavern. It was also found that the measurement and analysis of acoustic emission events can describe the accumulation of damage due to subcritical crack growth quantitatively. That is, AE monitoring can provide the current status of rock under loading if we make an identical installation condition in the field with that of the laboratory test.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.18 no.1
• /
• pp.170-181
• /
• 2015

A research on extracting croplands located nearby coastal areas using the spatial information data sets is the important task for managing the agricultural products in coastal areas. This research aims to extract the various croplands(croplands on mountains and croplands on plain areas) located nearby coastal areas using the KOMPSAT-2 imagery, the high-resolution satellite imagery, and the airborne topographic LiDAR(Light Detection And Ranging) data acquired in coastal areas of Uljin, Korea. Firstly, the NDVI(Normalized Difference Vegetation Index) imagery is generated from the KOMPSAT-2 imagery, and the vegetation areas are extracted from the NDVI imagery by using the appropriate threshold. Then, the DSM(Digital Surface Model) and DEM(Digital Elevation Model) are generated from the LiDAR data by using interpolation method, and the CHM(Canopy Height Model) is generated using the differences of the pixel values of the DSM and DEM. Then the plain areas are extracted from the CHM by using the appropriate threshold. The low slope areas are also extracted from the slope map generated using the pixel values of the DEM. Finally, the areas of intersection of the vegetation areas, the plain areas and the low slope areas are extracted with the areas higher than the threshold and they are defined as the croplands located nearby coastal areas. The statistical results show that 85% of the croplands on plain areas and 15% of the croplands on mountains located nearby coastal areas are extracted by using the proposed methodology.