• Fire Science and Engineering
• /
• v.34 no.4
• /
• pp.59-68
• /
• 2020

In this study, the authors designed a reduced-scale railway vehicle fire, which was necessary for evaluating the fire safety of railway tunnels using a reduced model. To overcome the shortcomings of the methods used in conventional reduced-scale railway tunnel tests, the authors simulated the fire source of a railway vehicle using a methanol fire source for fire buoyancy, and a smoke cartridge for smoke visualization. Therefore, the heat release mass consumption rates of various methane trays were measured using a cone calorimeter (ISO 5660). The critical ventilation velocity in the railway tunnels was obtained using the designed fire source of the railway vehicle, which was evaluated by the measured temperature at the top of the tunnel as well as laser visualization.

• Journal of the Korean Chemical Society
• /
• v.55 no.2
• /
• pp.163-168
• /
• 2011

The variations of molar conductivity of various surfactants such as sodium caprylate, sodium laurate, sodium palmitate, sodium stearate, sodium oleate, sodium dodecyl sulphate, and lithium dodecyl sulphate with concentrations of the surfactants for each of the solutions consisting of mixtures of varying concentrations of N-methyl acetamide in water at constant temperature of $30{\pm}0.2^{\circ}C$ were studied. The critical micelle concentration (CMC) for each surfactant is measured. It is found that the CMC values in mixtures of N-methyl acetamide and water solutions of various surfactants are lower than the CMC values in water, and the driving force for micelle formation correlates with solvophobicity. The surfactant-solvent interactions that drive amphiphilic self-organization in N-methyl acetamide in water are discussed. Thermodynamic parameters were evaluated for micellar system to explain the results.

• Korean Journal of Materials Research
• /
• v.3 no.2
• /
• pp.151-157
• /
• 1993

Abstract We have fabricated Y-Ba-Cu-O superconducting thin films by in-situ on-axis rf magnetron sputtering method using $Y_1$B$a_2$C${u_4}\;{_2O_x}$ nonstoichiometric target. Reactive ion etching (RIE) method was used in patterning the films. We have investigated the properties of patterned films, and compared the properties of the films before and after patterning. As the line width of the pattern decreases from 5${\mu}$m to 2${\mu}$m, a slight but not significant degradation in superconducting properties of the patterned films is observed. The bridge patterns are found to have clean edges and good electrical properties enough to be applied in device applications. From the result of this research, the possibility of submicron patterning by RlE is confirmed.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2010.10a
• /
• pp.552-555
• /
• 2010

In this paper, we propose a context-aware system using wireless multi sensor module to monitor the state for industrial factory environment. Wireless multi sensor module combines sensing values which are collected from each acceleration, pressure, temperature and gas sensors. Moreover, it delivers this data to server after being encoded by RS code. Thereafter, RS decoder decodes the values that are received from wireless multi sensor module and fixes errors which occur in wireless communication. Based on decoded data, context-aware algorithm sets critical range and compares it to the sensing values, if the sensing values are out of the range, an event occurs by the algorithm. At the same time, if there is another sensing value which is out of the range for standby time T seconds, the algorithm orders 3 steps-alarm to occur depending on each situation. Through this system, it becomes eventually possible to monitor machines' condition effectively. From the simulation, we confirm that this system is efficient to status monitoring of industrial automation equipment.

• Progress in Superconductivity and Cryogenics
• /
• v.8 no.1
• /
• pp.39-44
• /
• 2006

Before applying HTS power cable to the real utility. system analysis should be carried out by some simulation tools . Hereby the electrical power system analysis is very important for practical use of HTS devices. Nowadays PSCAD/EMTDC simulation tool is one of the most popular and useful analysis tool for the electrical power system analysis. Unfortunately the model component for HTS power cable is not provided in the PSCAD/EMTDC simulation tool In this paper. the EMTDC model component for HTS power cable has been developed considering critical current, critical temperature and recovery time constant that depend on the sorts of HTS wire. The numerical model of HTS Power cable in PSCAD/EMTDC was designed by using the real experimented data obtained from the real HTS 1G wire test. The utility application analysis of HTS power cable was also performed using the developed model component and the parameters of the real utility network in this study. The author's got good results. The developed model component for HTS power cable could be variously used when the power system includes HTS power cable, especially it will be readily analyzed by PSCAD/EMTDC in order to obtain the data for the level of fault current power flow, and power losses, and so on.

• Korean Journal of Environmental Biology
• /
• v.27 no.3
• /
• pp.292-296
• /
• 2009

This study was conducted to estimate relationship between temperature and egg development of Nannophya pygmaea, an endangerd dragonfly species in Korea, using eight different temperature conditions (17, 20, 22, 25, 28, 30, 33, and $36^{\circ}C$). Eggs of N. pygmaea were collected from female adults inhabited a small wetland in Mungyeong-si, Gyeongsangbuk-do, Korea, in June 2007. As a result, hatching rates were 2.86, 17.09, 24.32, 39.67, 34.43, 40.57, 44.79, and 1.75% at 17, 20, 22, 25, 28, 30, 33, and $36^{\circ}C$, respectively. The nonlinear model of the temperature related to egg development was well fit to the modified Sharpe and DeMichele model. The derived lower developmental threshold temperature for egg hatching was $14.02^{\circ}C$(y=0.005988x-0.084, $r^2$=0.99), and the derived optimal development temperature was $30{\sim}35^{\circ}C$.

• Korean Journal of Remote Sensing
• /
• v.24 no.6
• /
• pp.571-581
• /
• 2008

The sea fog occurs frequently in the west coast of Korea in spring and summer. This study focused on the detection of sea fog using MODIS satellite images. We presented a method for sea fog detection based on the homogeneity level between low stratus and sea fog, which was that the top surface of sea fog had a homogeneous aspect while that of low stratus had a heterogenous aspect. The results showed that the both homogeneity of $11{\mu}m$ brightness temperature (BT) and brightness temperature difference (BTD, $BT_{3.7{\mu}m}-BT_{11{\mu}m}$) were available to discriminate sea fog from low stratus. The frequency of difference between BT in fog/stratus area and BT in clear area provided reasonable result. In addition, the threshold values of standard deviations of BT and BTD in the fog/stratus area were applicable to differentiate fog from low stratus.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.33 no.3
• /
• pp.213-218
• /
• 2000

Tolerance on temperature and salinity of Ruditapes philippinarum was investigated in five different salinity, $32.0,\;25.6,\;19.20,\;12.80,\;6.40,\;3.20{\%_{\circ}}$ with increasing continuously $1^{\circ}C/day 2^{\circ}C/day\;and\;3^{\circ}C/day$ water temperature. R. philippinarum was acclimated to $18^{\circ}C\;and 25^{\circ}C$ before the experiment. Oxygen consumption rates and filtration rates of R. philippinarum were estimated during the experiment. $LT_{50}$ of two stocks acclimated to $18^{\circ}C\;and\;25^{\circ}C$ were similar. However, the maximum tolerance temperature of a stock acclimated $18^{\circ}C\;was\;36^{\circ}C$ while a stock acclimated $25^{\circ}C\;was\;37^{\circ}C$. This suggested that the higher water temperature a stock acclimated, the higher tolerance a stock showed, The surival rates of R. philippina겨m with the changes in salinities decreased below $19,2\;{\%_{\circ}}\;at\;18^{\circ}C\;and\;25^{\circ}C$. Oxygen consumption rates in the experimental group acclimated at $18^{\circ}C$ reduced with decreasing of salinity concentrations, while those of the experimental group acclimated at $25^{\circ}C$ showed irregular trend. Filtration rates revealed the maximum at 24{\~}28^{\circ}C$ in the experimental group acclimated ai $18^{\circ}C\;and\;31{\~}33^{\circ}C\;in\;those\;at\;25{\circ}C$. Filtraton rates shanty decreased at the lower salinity concentrations.

• Korean Journal of Food Science and Technology
• /
• v.20 no.2
• /
• pp.200-204
• /
• 1988

Cryoprotectivity of garlic bulb caused by the freezing point depression was studied to establish the possibility of preserving the garlic at subzero temperature. Freezing point of fresh garlic tissue showed almost consistency, ranged from $-4^{\circ}C\;to\;-5^{\circ}C$ regardless of the cultivation area. However, the freezing point was varied with the postharvest treatment and storage conditions, so that freezing point of fresh garlic was $-3.5^{\circ}C$ before predrying, $-4.5^{\circ}C$ after predrying, $-5.5^{\circ}C$ after 5 months of storage and that of dead tissue was $-2.5^{\circ}C$. Freezing lethality of fresh garlic bulb preserved at -4, -6.5 and $-15.5^{\circ}C$ were 0, 10 and 70%, respectively. From these results, it was concluded that critical lethal temperature might be $-5{\sim}-6^{\circ}C$. The respiration rate of garlic bulb decreased with lowering the storage temperature down to $-4^{\circ}C$. $Q_{10}$ value was 2 at the temperature range of $-4{\sim}-5^{\circ}C$, 3 at $5{\sim}15^{\circ}C$ and 1.2 at $15{\sim}37^{\circ}C$. In conclusion, optimal temperature for garlic storage was $-4^{\circ}C$ when considering the cryoprotectivity of garlic bulb at subzero temperature.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.16 no.2
• /
• pp.243-260
• /
• 2018

A literature review on the effects of high temperature and radiation on radiation shielding concrete in Spent Fuel Dry Storage is presented in this study with a focus on concrete degradation. The general threshold is $95^{\circ}C$ for preventing long-term degradation from high temperature, and it is suggested that the temperature gradient should be less than $60^{\circ}C$ to avoid crack generation in concrete structures. The amount of damage depends on the characteristics of the concrete mixture, and increases with the temperature and exposure time. The tensile strength of concrete is more susceptible than the compressive strength to degradation due to high temperature. Nuclear heating from radiation can be neglected under an incident energy flux density of $10^{10}MeV{\cdot}cm^{-2}{\cdot}s^{-1}$. Neutron radiation of >$10^{19}n{\cdot}cm^{-2}$ or an integrated dose of gamma radiation exceeding $10^{10}$ rads can cause a reduction in the compressive and tensile strengths and the elastic moduli. When concrete is highly irradiated, changes in the mechanical properties are primarily caused by variation in water content resulting from high temperature, volume expansion, and crack generation. It is necessary to fully utilize previous research for effective technology development and licensing of a Korean dry storage system. This study can serve as important baseline data for developing domestic technology with regard to concrete casks of an SF (Spent Fuel) dry storage system.