• Korean Journal of Materials Research
• /
• v.5 no.7
• /
• pp.808-815
• /
• 1995

The magnetic states of nonstoichiometric substituted ferrite Fe$_{}1.429$(Al$_{4-x}$ Ga$_{x}$)$_{0.286}$ Si$_{0.143}$ /O$_4$ system have been investigated using Mossbauer spectroscopy and SQUID. The Mossbauer spectra at room temperature show well-defined two Zeeman patterns for x=0.2, superpositions of two Zeeman patterns and a doublet for x=0.4. The doublet peak seems to be originated from the superparamagnetic clusters. The system shows significant departures from the Neel's collinear model and seems to be the diluted ferrites. The Mossbauer spectra below R.T show various and complicated patterns, which can be explained by freezing of the superparamagnetic clusters. On cooling, magnetic states of the system may be various and multicritical, Resulting from SQUID measurements, there was an unexpected dip in magnetization curves below 50K. It was interpreted as an effect of spin canting including spin freezing or collective spin behavior.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.4
• /
• pp.1915-1920
• /
• 2013

This paper is the study for the directional solidification of the ingot through the thermal analysis simulation and structural change of casting furnace. With the results of thermal analysis simulation, the silicon as a whole has reached the melting temperature as the retention time 80 min. The best cooling conditions showed at the upper cooling temperature $1,400^{\circ}C$ and cooling time 60min. The fabricated wafers showed the superior etching result at the grain boundary than that of existing commercial wafers. The FTIR measurements of oxygen and carbon impurities were not in the critical value for solar conversion efficiency. The NAA analysis of metal impurities were also detected the total number of 18 different metals, but the concentration distribution showed no significant positional deviations in the same position from the top to the bottom.

• Journal of the Korean Geotechnical Society
• /
• v.37 no.12
• /
• pp.47-56
• /
• 2021

The cryosuction (negative pore pressure) in freezing soils causes groundwater migration from the frozen fringe to freezing front for ice lens formation. Frost heave and heaving pressure by ice lens cause damage to ground infrastructure. In order to prevent damage by the frost heave, various frost susceptibility criteria have been proposed. The SP (Segregation Potential) is the most widely used classification criterion for frost susceptibility in cold regions. The expansion of the ice lens by the migration of the groundwater is a key role in frost heave mechanism, and thus it is necessary to evaluate the hydraulic conductivity. In this paper, soil mixtures of coarse-fines (sand-silt) were prepared in various weight fractions and used for frost heave and column permeability test. For each case, the SP and the hydraulic conductivity were derived and correlations were analyzed. As a results, the transition threshold of the SP and the hydraulic conductivity were shown at 20% and 50% of the silt weight fraction, respectively. Although there are difference between these transition thresholds, these two coefficients show a specific correlation. In the future, additional study should be conducted for detailed analysis of the threshold transition values between SP and hydraulic conductivity.

• Korean Journal of Remote Sensing
• /
• v.39 no.6_1
• /
• pp.1235-1243
• /
• 2023

This study proposes the detection algorithm for the cold water mass (CWM) along the eastern coast of the Korean Peninsula using sea surface temperature (SST) data provided by the Korea Institute of Ocean Science and Technology (KIOST). Considering the occurrence and distribution of the CWM, the eastern coast of the Korean Peninsula is classified into 3 regions("Goseong-Uljin", "Samcheok-Guryongpo", "Pohang-Gijang"), and the K-means clustering is first applied to SST field of each region. Three groups, K-means clusters are used to determine CWM through applying a double threshold filter predetermined using the standard deviation and the difference of average SST for the 3 groups. The estimated sea area is judged by the CWM if the standard deviation in the sea area is 0.6℃ or higher and the average water temperature difference is 2℃ or higher. As a result of the CWM detection in 2022, the number of CWM occurrences in "Pohang-Gijang" was the most frequent on 77 days and performance indicators of the confusion matrix were calculated for quantitative evaluation. The accuracy of the three regions was 0.83 or higher, and the F1 score recorded a maximum of 0.95 in "Pohang-Gijang". The detection algorithm proposed in this study has been applied to the KIOST SST system providing a CWM map by email.

• Korean journal of applied entomology
• /
• v.29 no.4
• /
• pp.217-221
• /
• 1990

Some biological phenomena of Anagrus incarnatus Haliday, an egg parasitoid of planthopper, were studied under three different constant temperatures. Duration from egg to adult emergence of the parasitoid from the BPH eggs were 21.5, 13.6 and 10.6 days under $20^{\circ}C$, $25^{\circ}C$ and $30^{\circ}C$, respectively. Rate of the development was highly correlated with temperature. The critical temperature was estimated as $10.0^{\circ}C$ and the effective degree days was 210.3 day-degree. Durations for the development of A. incarnatus under 25$\pm$$1^{\circ}C$ (16L : 8D) were 12.4, 12.5 and 12.1 days from eggs of N. lugens, S. furcifera and L. striatellus, respectively. Duration of the development of A. incarnatus from 1, 3, 5, 7 days old BPH eggs were 12.5, 12.1, 12.9 days, respectively. The average longevity of adult was 5.3 days under 25$\pm$$1^{\circ}C$. Number of the ovarian and practically oviposited eggs were 34.8$\pm$28 and 28.3$\pm$0., respectively. Female A. incarnatus laid most of the eggs within few days after the emergence ; over 60% within 24 hours, nearly 90% upto the 2nd day, and nearly 100% upto the 3rd day.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.33 no.3
• /
• pp.213-218
• /
• 2000

Tolerance on temperature and salinity of Ruditapes philippinarum was investigated in five different salinity, $32.0,\;25.6,\;19.20,\;12.80,\;6.40,\;3.20{\%_{\circ}}$ with increasing continuously $1^{\circ}C/day 2^{\circ}C/day\;and\;3^{\circ}C/day$ water temperature. R. philippinarum was acclimated to $18^{\circ}C\;and 25^{\circ}C$ before the experiment. Oxygen consumption rates and filtration rates of R. philippinarum were estimated during the experiment. $LT_{50}$ of two stocks acclimated to $18^{\circ}C\;and\;25^{\circ}C$ were similar. However, the maximum tolerance temperature of a stock acclimated $18^{\circ}C\;was\;36^{\circ}C$ while a stock acclimated $25^{\circ}C\;was\;37^{\circ}C$. This suggested that the higher water temperature a stock acclimated, the higher tolerance a stock showed, The surival rates of R. philippina겨m with the changes in salinities decreased below $19,2\;{\%_{\circ}}\;at\;18^{\circ}C\;and\;25^{\circ}C$. Oxygen consumption rates in the experimental group acclimated at $18^{\circ}C$ reduced with decreasing of salinity concentrations, while those of the experimental group acclimated at $25^{\circ}C$ showed irregular trend. Filtration rates revealed the maximum at 24{\~}28^{\circ}C$ in the experimental group acclimated ai $18^{\circ}C\;and\;31{\~}33^{\circ}C\;in\;those\;at\;25{\circ}C$. Filtraton rates shanty decreased at the lower salinity concentrations.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.16 no.2
• /
• pp.243-260
• /
• 2018

A literature review on the effects of high temperature and radiation on radiation shielding concrete in Spent Fuel Dry Storage is presented in this study with a focus on concrete degradation. The general threshold is $95^{\circ}C$ for preventing long-term degradation from high temperature, and it is suggested that the temperature gradient should be less than $60^{\circ}C$ to avoid crack generation in concrete structures. The amount of damage depends on the characteristics of the concrete mixture, and increases with the temperature and exposure time. The tensile strength of concrete is more susceptible than the compressive strength to degradation due to high temperature. Nuclear heating from radiation can be neglected under an incident energy flux density of $10^{10}MeV{\cdot}cm^{-2}{\cdot}s^{-1}$. Neutron radiation of >$10^{19}n{\cdot}cm^{-2}$ or an integrated dose of gamma radiation exceeding $10^{10}$ rads can cause a reduction in the compressive and tensile strengths and the elastic moduli. When concrete is highly irradiated, changes in the mechanical properties are primarily caused by variation in water content resulting from high temperature, volume expansion, and crack generation. It is necessary to fully utilize previous research for effective technology development and licensing of a Korean dry storage system. This study can serve as important baseline data for developing domestic technology with regard to concrete casks of an SF (Spent Fuel) dry storage system.

• Korean journal of applied entomology
• /
• v.37 no.1
• /
• pp.53-58
• /
• 1998

Comparative studies on some ecological characteristics of three phytoseiid mitespecies (one native; Arnblyseius womersleyi Schica, and two introduced species; A. fallacis Garmanand Typhlodromus occidentalis Nesbit) were carried out. The two-spotted spider mite (Tetranychusurticae Koch) was supplied as prey. Under four constant temperatures of 20, 23, 25 and 30f OS$^{\circ}$C,duration of growth from egg to adult for A. womer.vleyi was 11.5, 7.7, 6.7 and 5.6 days. While twoother species needed slightly shorter time but not significantly different. Critical temperature andeffective degree-days (DD) of A. womerslevi females were 83$^{\circ}$C and 1 1 1.6 DD, whereas those of A..fallacis were 10.7"C and 86.0 DD, and those of 7: occidentalis were 10.7"C and 94.1 DD. Also, thoseof males were similar to their females. Average longevity of females of A. womersleyi, A. fallucisand 7: occidentalis were 18.2 k 8.67, 19.6 3~7.18 and 13.0f5.66 days, total fecundity were 34.3 $-11.93, 39.8k 12.64 and 23.6k8.86, respectively. Under four constant temperatures of 20, 23, 25 and30-t0.S$^{\circ}$C, A. womersleyi consumed 9.1 f2.49, 9.7 k2.00, 9.7 f 2.61, and 10.3 k2.33 eggs of 7:urticae throughout their development. A. ,fizlluc~i.sc onsumed 10.2 k 2.52, 9.7 f2.29, 10.7 f 2.37 and10.1 k2.62 eggs, while, 7: occidentalis consumed 1 1.9 k3.43, 14.2 f4.50, 14.8 k 3.2 1 and 12.7 f2.95 eggs, respectively. Gravid females of A. womersleyi, A. f~zllacis and 7: occidentalis consumed11.4f1.59, 12.5k1.43 and 11.7k3.07 eggs, or consumed 11.9f 2.63, 12.4k3.82, and 12.5f 3.73protonymphs of 7: urticae in a day at 25-30$^{\circ}$C.e in a day at 25-30$^{\circ}$C.

• Journal of the Korean Chemical Society
• /
• v.62 no.1
• /
• pp.24-29
• /
• 2018

Despite the great potential for the versatile applications in food industry and medical area, chitosan as a biocompatible cationic polysaccharide has suffered from the limited solubility under physiological condition. Herein, we demonstrated the electrostatic formation of chitosan-based polyplex particles, counterbalanced by polyacrylate as an anionic polyelectrolyte. The resulting polyplex exhibited pH- and composition-dependent changes in their surface charges as measured by zeta potential, which can be employed to provide the interparticle repulsive forces for enhanced colloidal stability in homogeneous solution. Subsequently, amide coupling between the acrylates and glucosamine residues of chitosan inside the polyplex further generated the hydrogel particles, which showed the temperature-sensitive swelling property. This aspect can be attributed to the partial formation of acryl amide residues, which have been generally known to possess the lower critical solution temperature (LCST).

• Proceedings of the Korean Vacuum Society Conference
• /
• 1999.07a
• /
• pp.80-80
• /
• 1999

플라즈마 디스플레이 패널(PDP)의 공정을 간단히 하기 위하여 포토레지스트, ITO, 격벽재료를 Ar+ laser(λ-514 nm, CW)와 Nd:YAG laser(λ=532, 266nm, pulse)로 직접 패터닝 하였다. 레이저에 의한 포토레지스트의 패턴결과, 아르곤 이온 레이저의 포토레지스트 가공의 반응 메카니즘은 레이저 빔의 열에 의한 시료 표면의 국부적인 온도상승에 의한 용융작용이며, 그 결과 식각 후 형성된 패턴의 단면 모양도 레이저빔의 profile과 같은 가우시안 형태를 나타낸다. Nd:YAG 레이저의 4고조파(532nm)를 이용한 경우 200$\mu\textrm{m}$/sce의 주사속도에서 포토레지스트를 패턴하기 위한 임계에너지(threshold energy fluence) 값은 25J/cm2이며, 약 40J/cm2의 에너지 밀도에서 하부기판의 손상이 발생하기 시작하였다. 글미 1은 Nd:YAG 레이저 4고조파를 이용하여 포토레지스트를 식각한 경우 SEM 표면사진(위)과 단차특정기에 의한 단면형상(아래)이다. ITO 막의 레이저에 의한 직접 패턴 결과, ITO 막은 레이저 펄스에 의한 급속 가열 및 증발에 의한 메커니즘으로 식각이 이루어지며, 레이저 파장에 따른 광흡수 정도의 차이에 의해 2고조파 (532nm)에서 ITO 막의 가공 품질이 4고조파(266nm)에 비해 우수하며 패턴의 폭도 출력에 따라 제어가 용이하였다. 그림 2는 Nd:YAG 레이저 2고조파를 이용하여 ITO를 식각한 경우 SEM표면 사진(위)과 단차측정기에 의한 단면형상(아래)이다. 격벽 재료의 레이저에 의한 직접 패턴 결과, Ar+ 레이저(514nm)는 출력 밀도 32NW/cm2에서 격벽을 유리 기판의 경계면까지 식각하였다. Nd:YAG 레이저(532nm)는 laser fluence가 6.5mJ/cm2에서 격벽을 식각하기 시작하였으며, 19.5J/cm2에서 유리기판의 rudraus(격벽 두께 130$\mu\textrm{m}$)까지 식각하였다.