• Journal of the Korean Chemical Society
• /
• v.48 no.3
• /
• pp.236-242
• /
• 2004

The critical micelle concentration (CMC) and the counterion binding constant (B) in a mixed micellar state of the Dodecylpyridinium chloride (DPC) with the Cetyldimethylethylammonium bromide (CDEAB) at 25$^{\circ}C$ in aqueous solutions of n-butanol were determined as a function of ${\alpha}_1$ (the overall mole fraction of DPC) by the use of electric conductivity method. Various thermodynamic parameters (($X_i,\;{\gamma}_i,\;C_i,\;a^M_i,\;{\beta},\;and {\Delta}H_{mix})$were calculated by means of the equations derived from the nonideal mixed micellar model. The effect of n-butanol on the mixed micellization of the DPC/CDEAB mixtures has been also studied by analyzing the measured and calculated thermodynamic parameters (CMC, B 및 $;{\Delta}G_o\;^m$).

• Journal of the Korean Chemical Society
• /
• v.46 no.6
• /
• pp.495-501
• /
• 2002

The critical micelle concentration(CMC) and the counterion binding constant(B) for the mixed micel-lization of sodium n-octanoate(SOC) with n-octylammonium chloride(OAC) were determined as a function of the overall mole fraction of $SOC({\alpha}_1).$ Various thermodynamic parameters($x_i$, $Y_i$, $C_i$, $${\alpha}_i^M$$, and $\Delta$$H_{mix}$) for the mixed micellization of the SOC/OAC systems have been calculated and analyzed by means of the equations derived from the nonideal mixed micellar model. The results show that there are great deviations from the ideal behavior for the mixed micellization of these systems. And other thermodynamic parameters(${\Delta}$$G^0_m$, ${\Delta}$$H^0_m$, and ${\Delta}$$S^0_m$) associated with the micellization of SOC,OAC, and their $mixture({\alpha}_1=0.5)$ have been also estimated from the temperature dependence of CMC and B values, and the significance of these parameters and their relation to the theory of the micelle formation have been considered and analyzed by comparing each other.

• Journal of the Korean Chemical Society
• /
• v.42 no.5
• /
• pp.519-525
• /
• 1998

The critical micelle concentration $(CMC^{\ast})$ and the counterion binding constant (B) in a micellar state of the mixed surfactant systems of dodecylpyridinium chloride (DPC) with dodecyltrimethylammonium bromide (DTAB), tetradecyltrimethylammonium bromide (TTAB), and cetyldimethylethylammonium bromide (CDEAB) were determined at $25^{\circ}C$ as a function of ${\alpha}_1$ (the overall molc fraction of DPC) by the use of electric conductivity method. Various thermodynamic parameters $(X_{i},\;{\gamma}_{I},\;C_{i},\;a^{M}_{i}, \beta,\;{\Delta}H_{mix}, \;and\; {\Delta}G^{o}_{m})$ for the micellization of DPC/DTAB, DPC/TTAB, and DPC/CDEAB mixtures were calculated and analyzed for each system by means of the equations derived from the pseudophase separation model. The results show that the DPC/DTAB mixed system has the greatest deviation and the DPC/CDEAB mixed system has the smallest deviation from the ideal mixed micellar model.

• Journal of the Korean Chemical Society
• /
• v.43 no.6
• /
• pp.614-620
• /
• 1999

The critical micelle concentration (CMC) and the counterion binding constant (${\beta}$) at the CMC of the mixtures of Dodecylpyridinium chloride (DPC) and Tetradecyltrimethylammonium bromide (TTAB) have been determined from the concentration dependence of electrical conductance at various temperatures from $4^{\circ}C$ to $36^{\circ}C$. Thermodynamic parameters (${\Delta}C_p$, ${\Delta}G^o_m$, ${\Delta}H^o_m$ and ${\Delta}S^o_m$), associated with the micelle formation of DPC/TTAB mixtures, have been estimated from the temperature dependence of CMC and ${\beta}$values. The measured values of ${\Delta}C_p$ and ${\Delta}G^o_m$ are negative but the values of ${\Delta}S^o_m$ are positive in the whole measured temperature region. The values of ${\Delta}H^o_m$ are positive at low temperature region and negative at high temperature region. The results show that all of the thermodynamic parameters are dependent on temperature and mole fraction of DPC(${\alpha}_DPC$).

• Journal of the Korean Chemical Society
• /
• v.33 no.5
• /
• pp.459-467
• /
• 1989

When the sufactants are dissolved in water, they associate to form micelles and solubilize oil inside the micelle to form swollen micelles. Although spherical aggregates like micelles and swollen micelles occupy the same regions in the phase diagram of water-oil-surfactant systems, they are treated in different viewpoint for the formation of such aggregates. Hence a unified thermodynamic formalism for the formation of such structure is presented in this study. In all cases, the to ideal solution theory is applied for dilute system and the energy of formation is expressed as the sum of hydrophobic interaction energy and surface energy due to surfactant film. From the model, critical micelle concentration (CMC), average aggregation number, and solubilization ratio are predicted and compared with the known experimental observation.

• Proceedings of the SAREK Conference
• /
• 2008.11a
• /
• pp.275-280
• /
• 2008

The effects of the surfactant type, i.e., CTAB(cationic), SDS(anionic), and GA(polymeric), on the stability of 0.1 vol.% $Al_2O_3$ nanofluids were investigated. The changes in size and zeta potential of nanoparticles in nanofluids with pH, surfactant concentration, and time were experimentally observed. The nanofluids adding CTAB, which ionizes of the same charge with the bare particle surface, was found to have the best stability regardless of the surfactant concentration, whereas those with SDS became unstable under low surfactant concentration conditions, i.e. lower than the critical micellel concentration(CMC), before the charge reversal occurred. With higher SDS concentration over CMC, they became stable. Gum Arabic, which had been used often to stabilize the nanofluids, was also tested. In result, it was found that the type and concentration of surfactants to add should be selected considering pH and the sign of the bare particle surface charge.

• Journal of the Korean Chemical Society
• /
• v.42 no.4
• /
• pp.383-390
• /
• 1998

The interaction of phenoxide anion with several cationic surfactant micelles (DTAB, TTAB, CTAB, CDEAB, and CTAC) was studied by UV/Vis spectrophotometric method. The solubilization constants of phenoxide anion into the cationic micellar phase and the critical micelle concentration of these surfactants in the presence of the phenoxide anion could be determined from the absorbance changes. The measured solubilization constants were changed according to the following order: $K_s(CTAC)>K_s(CDEAB)>K_s(CTAB)>K_s(TTAB)>K_s(DTAB).$ Effects of salts(NaCl and NaBr) and n-alcohols(butanol, pentanol, and hexanol) on the solubilization of phenoxide anion by the TTAB system have been also measured and analyzed. There was a great decrease of solubilization constant and CMC with these additives. The standard Gibbs free energy, enthalpy, and entropy changes for the solubilization of phenoxide anion by the TTAB system were calculated from the temperature dependence of $K_s$ values.

• Journal of the Korean Chemical Society
• /
• v.44 no.3
• /
• pp.177-183
• /
• 2000

The interaction of phenoxide anion with .the mixed micelles of CTAB(Cetyl-trimethylammonium bromide) and TTAB(Tetradecyltrimethylammonium bromide) was studied by UV/Vis spectrophotometric method. The solubilization constants($K_s$) of phenoxide anion into the mixed micellar phase and the critical micellar concentrations(CMC) of those mixed surfactant systems have been measured and analyzed with the change of overall mole fraction of CTAB($\alpha_{CTAB}$) The effects of additives(n-pentanol and NaBr) on the solubilization of phenoxide anion by those mixed surfactant systems have been also measured. There was a great decrease on the values of solubilization constant and CMC with these additives. For the thermodynamic study, the dependence of $K_s$ values on temperature has been measured and various thermodynamic parameters(${\Delta}G^0_s$, ${\Delta}H^0_s$ and ${\Delta}S^0_s$) have been also calculated. The results show that all the values of ${\Delta}G^0_s$ and ${\Delta}H^0_s$ are negative within the measured temperature region but the values of ${\Delta}S^0_s$ are positive.

• Applied Chemistry for Engineering
• /
• v.10 no.4
• /
• pp.537-542
• /
• 1999

Removal of sulfur compounds in the petroleum products is essential for the prevention of sulfur oxides. However, conventional methods involving catalytic reactions are found to have some limitations in complete removal of harmful sulfur compounds and to require relatively high cost. Recently, desulfurization process using microorganisms is known to be promising in terms of excellent sulfur removal efficiency and reasonably low treatment cost. For the biodesulfurization process to be effective, the solubilization of sulfur compounds into aqueous solution is a prerequisite. In this study, polyoxyethylene nonionic surfactants were used in order to enhance the solubilization of sulfur spectrophotometer. The solubilization of sulfur compounds was found to increase with temperature and to bo abruptly increased at above 1 wt % surfactant solutions. It was also observed that the longer the hydrophobic chain of the surfactant molecule, the higher solubilizing power of a nonionic surfactant. It was found that the Tergitol series surfactants showed higher solubilizing capacity than Neodol series presumably due to the disruption of the regular packing in the hydrocarbon region of the surfactant aggregates.