• Resources Recycling
• /
• v.19 no.2
• /
• pp.10-18
• /
• 2010

This research investigates the feasibility of ceramic specimens made from Primary clay and Red Hwangto with MSWI fly ash. Specimens preduced by mix-design maximum 20 wt% MSWI fly ash were analysed by SEM, UTM, ICP, etc. As a result of measurement,$P_{10}$ specimen was improved on bending strength and $R_5$ specimen was improved on compressive and bending strength. Also amount of extracted heavy metal was suitable for regulatory limits. This indicates that MSWI fly ash is indeed suitable for the partial replacement of ceramic materials in bricks.

• Geotechnical Engineering
• /
• v.11 no.3
• /
• pp.69-80
• /
• 1995

A numerical study was performed consolidation of soft clay with high vc difference method, based on the prover was used to estimate consolidation set Results of centrifuge model tests a using the finite strain consolidation an Analyzed results between two theories Infinitesimal theory showed more delta the finite strain consolidation theory caused by that the finite strain condo during consolidation as well as non relations.

• Journal of the Korean Geotechnical Society
• /
• v.17 no.4
• /
• pp.153-160
• /
• 2001

딜라토메터를 이용한 현장 수평압밀계수 추정법의 국내 점토지반 및 실트질 지반에의 적용성을 평가하기 위해 국내 점토지반과 실트지반에 대하여 각각 딜라토메터 관입시험 및 소산시험을 수행하였다. 소산시험 결과로부터 DMT-C법 [p$_2$-log t법과 C-√t법]과 DMT-A법을 이용하여 수평압밀계수를 추정하여 상호 비교하였으며 다른 실험방법에서 얻어진 결과들과도 함께 비교하고 평가하였다. 비교대상으로는 동일지반의 현장 피에조콘 소산시험으로 얻어진 수평압밀계수 및 불교란시료에 대하여 수행된 로셀압밀실험 및 일차원 실내압밀실험 결과가 함께 이용되었다. 연구결과 C-√t법을 제외한 p$_2$-log t법과 DMT-A법은 국내 점토지반에 대하여 상호일치하는 결과를 줄 뿐 아니라 피에조콘 결과와도 비교적 잘 일치하는 수평 압밀계수를 측정하였으며 다른 결과와 비교할 때 신뢰성 있는 결과를 주었다. 그러나 실트질 지반에 대하여는 p$_2$-log t법만이 적용 가능할 것으로 판단된다.

• Journal of the Korean Geosynthetics Society
• /
• v.4 no.4
• /
• pp.39-46
• /
• 2005

A series of numerical analyses on soft clay ground improved by plastic board drain(PBD) were carried out, in order to investigate the consolidation behavior considering viscosity of the improved ground. The applicability of numerical analyses, in which an elasto-viscoplastic three-dimensional consolidation finite element method is applied in this study, was confirmed through comparison between experimental and analytical results. As the analytical results, consolidation behavior of both settlement and excess pore pressure and effective stress in clay were elucidated. Then secondary consolidation characteristics of improved ground were estimated through compare with results of typical one-dimensional consolidation analysis.

• Journal of the Korean Geosynthetics Society
• /
• v.15 no.4
• /
• pp.97-104
• /
• 2016

This paper performed consolidation tests on soft ground with and without artesian pressure conditions to find out characteristics of leaching effects using two types of one-dimensional column equipment(height : 1,100mm, outer diameter : 250mm). Artesian pressure of 5.5kPa was applied to the bottom of soft ground inside column equipment. Distribution of salinity and shear strength with soil depth were measured after the consolidation test. From the results, it was found that distribution of undrained shear strength and salt concentrations were similar at the top of clay ground irrespective of artesian pressure condition. However, at the bottom of clay ground, the values of undrained shear strength and salt concentration under artesian pressure were lower than those without artesian pressure. This result indicates that structure of soft soil with artesian pressure was weakened by salt leaching. Electronic resistance results showed that void ratio under artesian pressure condition was more reduced than that without artesian pressure condition.

• Journal of the Mineralogical Society of Korea
• /
• v.15 no.4
• /
• pp.305-314
• /
• 2002

The dehydration of hexadecyltrimethylammonium (HDTMA)-exchanged montmorillonite has been studied using X-ray diffractometry (XRD) and differential scanning calorimetry (DSC). The dehydration in HDTMA-montmorillonite seems to influence the swelling behavior of the organo-clay during heating. The basal d(001) spacing vs temperature curve of the HDTMA-montmorillonite has one broad swelling edge with a shoulder on the low-temperature side. We believe that the shoulder at $100^{\circ}C$ for the HDTMA-montmorillonite is due to interlayer swelling induced by the initial rearrangement of surfactants, and the second edge at $200^{\circ}C$ is caused by interlayer swelling resulting from the secondary vertical reorientation of alkyl chains. It seems that the dehydration of organo-clay induces a reorientation of the alkyl chains by transition to more vertical position relative to the silicate sheets, allowing instantly greater d-spacing.

• Journal of the Korean Geotechnical Society
• /
• v.20 no.6
• /
• pp.5-10
• /
• 2004

The earth pressure coefficient at rest for clayey soils in the one-dimensional state, $K_0$ obtained from the triaxial test is not correct in principle because the seepage flow is radial and the displacement of soil elements is three-dimensional. Measurements of the earth pressure and the pore water pressure during one-dimension consolidation in the consolidometer ring are presented. The earth pressure and pore water pressure are measured directly by a circular part of the consolidometer ring of a floating type at its mid height. A plastic clay showed $K_0$=0.5 irrespective of pressure in the consolidometer ring.

• Journal of the Korean Geosynthetics Society
• /
• v.15 no.1
• /
• pp.47-57
• /
• 2016

Many researchers reported that artesian pressure exists in thick soft ground of Busan Nakdong river estuary. Artesian pressure in soft ground could affect rate of consolidation, settlement and drainage capasity of prefabricated vertical drain(PVD). This paper investigated consolidation behaviors of soft ground with partially penetrated PVD subjected to artesian pressure. Laboratory tests with 1-dimensional large column equipment and their numerical analyses were carried out. Test results showed that the consolidation settlement of clay ground with artesian pressure was higher than that without artesian pressure. Due to artesian pressure, the dissipation rate of excess pore water pressure was reduced in soft ground with artesian pressure, especially at bottom part of clay ground. Numerical results were in good agreement with experimental test results.

• Journal of the Korean Ceramic Society
• /
• v.39 no.8
• /
• pp.728-734
• /
• 2002

Stabilization behavior of Cr, Cd, Cu, Pb, Fe and Zn heavy metals in the EAF dust was investigated by adding EAF dust to clay or white clay, respectively, up to 50 wt% with 10 wt% intervals and sintering at temperatures between 200 and $1200^{\circ}C$ with $200^{\circ}C$ intervals with an aid of ICP-AES followed by TCLP test to evaluate heavy metal cation exchange capacity of the clay or the white clay. The clay or the white clay had a better Cr ion exchange capacity than that of zeolite. The TCLP leaching test for the sintered specimens showed that Cr and Fe were rarely detected for all the specimens and the concentration of Cd and Zn decreased with increasing sintering temperature and decreasing EAF dust contents respectively. When the clay or the white clay were mixed with EAF dust, cation exchange may occur between the clay and the EAF dust so that the first stabilization of the mixtures containing semistabilized heavy metals may happen. Stabilization of heavy metals in the ceramic bodies was further completed probably due to the eutectic reaction caused by the sintering of semi-stabilized mixtures. It was conceivable that the white clay rather than the clay may be a better stabilizer for the EAF dust containing heavy metals.

• The Journal of Engineering Geology
• /
• v.16 no.4 s.50
• /
• pp.403-409
• /
• 2006

This study was performed to assess the clay impact on alga growth which was a primary producer, in view of food chain in ecosystem. As clay minerals caused turbidity, a low sedimentation, high adsorption capacity with organic matter, adsorption - desorption effect with ionic chemicals, clay minerals were supposed to have a significant effect on the aquatic system. In study we tried to turn out NOAEL (No-observed-adverse-effect-level) of clay materials on the algae growth inhibition using such as kaolinite, sericite and montmorillonite. This study was indicated. (1) In both of kaolinite and sericite, the $72hr-EC_{50}$ of them shows 2,752 mg/L and 2,775 mg/L, respectively. (2) On the other hand, in the case of montmorillonite, the $72hr-EC_{50}$ is not shown a significant difference to that of control samples. (3) It can be explained that is also a very important parameter in an alga growth. Because an alga growth was increased when the permeability of W visible radiation was increased in all clay cases. (4) It is demonstrated alga growth was affected by the characteristics of clay materials. Hence we can assess the $\ulcorner$water environmental risk assessment caused clay materials$\lrcorner$ using the alga growth inhibition level indirectly.