• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.6
• /
• pp.3389-3395
• /
• 2014

Conventional methods, such as the clock time control method and temperature difference control method, for defrost control often encounter mal-defrost and a waste of energy. Therefore, a more efficient method is needed to control defrosting precisely. A photoelectric sensor unit consisting of an emitter and a collector was installed in the front of outdoor heat exchanger. Accurate defrost control was performed by monitoring and using the change in output voltage according to the presence of frost. In this study, experiments were performed to determine if the performance and characteristic curves obtained using the clock time control method can be reproduced using a photoelectric sensor under the heating and defrosting capacity test condition described at KS C 9306. The output voltage of the phototransistor (receiver) and heating capacity, power consumption, and surface temperature of the outdoor heat exchanger, were compared. The results showed that photoelectric sensors can be used as a defrost control method. On-off control timing of the clock time defrosting method was in good agreement with those predicted by the output voltage of the photoelectric sensor.

• Nuclear Engineering and Technology
• /
• v.26 no.1
• /
• pp.32-40
• /
• 1994

A digital control system for the steam generator oater level control is developed using the optimal control technique. To describe the more realistic situation, a feedwater valve actuator of the first order lag is included in the overall control system. The optimal gains are obtained by the LQ method which imposes the constraints on the feedwater valve motion as well as on the deviation between the input demand signal and the output feedwater. Developed also is a Kalman observer on account of the flow measurement uncertainty at low power. And a digital controller on the feedback loop is designed which makes the system maintain the same stability margins for all power ranges. The simulation results show that the optimal digital system has good control characteristics despite the adverse dynamics of the steam generator at low power.

• Journal of IKEEE
• /
• v.22 no.2
• /
• pp.384-392
• /
• 2018

A multiple-output LDO regulator is a good choice in terms of the efficiency in embedded systems requiring various supply voltages. A small feedback factor in LDO incurs the long settling time, resulting in large ripples in the time-multiplexing strategy. A new proposed topology enhances the settling time, and hence the ripples by incorporating the constant feedback factor with different reference voltages. The simulation results of a prototype design in a standard $0.35{\mu}m$ CMOS process verify that the proposed strategy enhances the settling time and ripple characteristic by more than doubled than a conventional circuit using the feedback factor of less than 0.4.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.17 no.2
• /
• pp.58-65
• /
• 2003

The conventional single phase PFC converter can control DC voltage to steady standard value but control system is system is complex and expensive and has rapidity problems because of controlled by detecting DC voltage, AC voltage and current. In order to solve those problems, this paper proposes senseless PFC converter circuit. The proposed circuit can control the whole system by detecting AC voltage waveform And it directly controlled DC output voltage by the controlled voltage value Kd(Ed/Ea). The fluctuation ratio of DC output voltage is changed by the circuit characteristics These characteristics are confirmed by some experimental results.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.13 no.6
• /
• pp.461-468
• /
• 2008

This paper presents a novel series connected DC/DC converter and a proper variable phase shift switching method in order to obtain high voltage ratio for fuel cell system. The proposed series connected DC/DC converter has same rectifier and LC filter for DC output voltage, so it can reduce the number of passive devices regardless of the converter number. In the conventional constant phase shift switching method, the proposed series connected DC converters have inverse bias output voltage. In order to overcome this problem, a simple but proper variable phase shift switching method is proposed in the a novel series connected DC/DC converter. In order to verify the proposed system, simulation and experiments are implemented.

• Proceedings of the KIEE Conference
• /
• 2002.04a
• /
• pp.204-206
• /
• 2002

계통연계 풍력발전시스템의 특성을 고찰하기 위해서는 블레이드, wind turbine, 정류기, 인버터 등의 풍력발전시스템의 각 구성요소의 모델링과 적절한 제어 알고리즘에 대한 모의가 요구된다. 본 연구에서는 동기발전기를 풍력발전기로 사용하고 있는 계통연계형 풍력발전시스템의 출력 및 동특성을 모의하기 위한 전류제어형 전압원인버터의 PSCAD/EMTDC 모듈을 제시한다. 풍속의 가변특성에 의해 동기발전기에 들어오는 입력은 변하게 되고, 동기발전기가 동기주파수를 유지할 수 있도록 인버터에서는 이러한 입력과 동일한 출력을 낼 수 있어야 하며, 동시에 계통에서 허용하는 일정 전압과 계통주파수와 동일한 주파수를 갖는 출력을 공급해야 한다. 본 논문에서는 이를 위해 동기발전기의 주파수를 제어하는 전류제어형 전압원인버터 모듈을 소개한다. 모의를 통해 결과를 검증한다.

• Proceedings of the KIEE Conference
• /
• 2000.07d
• /
• pp.2675-2677
• /
• 2000

본 논문에서는 광대역 입력전압에 대응 할 수 있는 직류 변환 장치(DC-DC Converter)의 제어기의 모델링 및 제어 방법에 대해서 제안한다. 일반적으로 직류 변환 장치의 주된 목적은 입력되는 직류 전압에 대해서 출력전압을 지속적이고 안정적으로 유지해 주는 것이다. 따라서, 안정적인 출력 전압을 얻는 방법으로서 제어되지 않은 직류 변환 장치에 입력전압을 안정적으로 공급해주는 방법도 고려해 볼 수 있으나, 이릴 경우 입력전류의 변화나 입력 전압이 지속적으로 변하는 경우에 대처 하기 어렵다. 따라서, 이러한 문제점들을 해결하기 위해서 출력전압을 궤환 시키고 이 신호에 의해 직류 변환 장치를 제어하는 방법을 고려한다. 또한, 단순한 제어기를 사용할 경우 그 입력전압의 범위가 소자의 한계와 안정성으로 인하여 국한적으로 한정되므로, 이러한 문제를 해결하기 위해 다수의 컨버터를 연결하고 이것을 프로세서를 사용하여 제어하는 방법을 설계한다. 모델링된 직류 변환 장치는 불연속선형 시스템(Piecewise Linear System)으로 해석되어 질 수 있으며, 아울러 각기 다른 입력 범위에서 동작하는 컨버터들에 대해서도 모델링되어야 한다. 또한 일정 간격의 입력 범위내에서 서로 다른 컨버터들을 동작시켜 줄 수 있는 방법도 고려한다. MATLab을 이용하여 파워 컨버터의 성능을 입증하고, 아울러 실제 회로의 실험을 통하여 결과를 검증한다.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.17 no.5
• /
• pp.48-55
• /
• 1980

For the purpose of composing an anti-ghost antenna system, 2 antennas, which have the identical radiation pattern, are fixed parallel to each other with a constant separation. In view of the fact that the phase differnce between the added power and the subtracted power of the two undesired signal which is recieved from all direction except from the real front one becomes radian, now It is Possible to make the amplitude of each Power become equal and the phase of the subtracted power become out of phase with that of the added power, by adjusting the amplitude of the subtracted power and shifting its phase by + or radian. Therefore the sum of the added power and the above modified subtracted power will be able to become zero. According to the above study, a hybrid circuit is designed and through operation of this circuit , the undesired wave can be seen to be reduced by 20 dB.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.22 no.6
• /
• pp.1-6
• /
• 2008

In this paper describes the process of designing a protection circuit against an open or short electronic ballast. An open electronic ballast creates high voltages in a regular period, which a lies voltage stress on switching devices. On the other hand, a shorted output generates excessive current, causing problems such as heat generation in the ballast and reduced lifespan of semiconductor devices. This study proposes a protection circuit consisting of TTL and passive devices to resolve the problems. The proposed protection circuit offers the benefits of low cost and high reliability. The proposed circuit was connected to an actual ballast to demonstrate its applicability.

• Annual Conference of KIPS
• /
• 2018.10a
• /
• pp.501-503
• /
• 2018

본 논문은 개인에 맞는 외출 시 필요한 정보를 문에 출력하여 외출 준비를 도와주는 스마트 도어 아이디오를 제안한다. 스마트 도어를 활성화 시켜 내장된 웹 카메라로 촬영된 사진을 이용하여 얼굴인식을 수행하고 수행한 결과로 개안 아이디를 통해 데이터베이스를 조작한다. 데이터베이스에 개인 준비물 데이터는 모바일 앱에서는 도어락을 제어하는 추가적인 기능도 수행한다. 개인 중비물외에도 개인 일정, 당일 날씨 및 교통 정보를 스마트 도어 LCD에 출력과 동시에 음성으로 알려준다. 본 논문에서 제시하는 스마트 도어는 LCD에 정보 출력뿐만 아니라 half-mirror와 함께 설계되어 전신 거울 기능도 포함된다. 스마트 도어는 어디에서 사용되는 문에 유용한 기능을 추가하여 공간 활용에 용이하고 필요한 소지품을 잊지 않고 챙길 수 있다.