• Journal of the Korean Chemical Society
• /
• v.40 no.3
• /
• pp.173-179
• /
• 1996

Transmission Electron Microscopy (TEM) was used to monitor the response of vesicle size and the intervesicle agglomeration with a variety of experimental parameters. Considered parameters are: (a) reaction temperture, (b) concentration of phosphatidylcholine, (c) concentration of aluminum ion with fixed concentration of phosphatidylcholine at 0.39 mM, and (d) mixed concentration of aluminum and phosphatidylcholine when fixing the weight ratio of phosphatidylcholine to aluminum at 0.01. Controlling these parameters, vesicle size changed and intervesicle agglomeration observed. As reaction temperature and the concentration of phosphatidylcholine increase, vesicle size decreases. With 0.2 M of aluminum ion, abnormal vesicle growth led by intervesicle agglomeration and coalescence was observed. When weight ratio of phosphatidylcholine to aluminum is 0.01, optimal vesicle size and size distribution can be obtained.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.04a
• /
• pp.985-988
• /
• 2008

Maglev is a system that a train runs levitated above a rail. Therefore it is very important to maintain a constant levitation gap for achieving serviceability and ride comfort. This study is a cooperation research subject of the 3-1 subject, performance improvement of maglev track structures, of the Center for Urban Maglev Program in Korea, started in 2006. The aim of this study is development of rapid constructions of bridge superstructure for maglev. At present, precast deck is widely used because of its superiority to cast-in-place concrete on quality and the term of works. The research group suggested basic systems of maglev guideway with PSC-U type and trapezoidal open steel box type girder, and precast deck, cooperating with Korea Railroad Research Institute, the managing institute of the 3-1 subject. In this study, full-scale structure was fabricated for structural safety evaluation of precast decks and rail, and a static performance test of those structures was performed.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.04a
• /
• pp.57-60
• /
• 2008

Maglev is a system that a train runs levitated above a rail. Therefore it is very important to maintain a constant levitation gap for achieving serviceability and ride comfort. This study is a cooperation research subject of the 3-1 subject, performance improvement of maglev track structures, of the Center for Urban Maglev Program in Korea, started in 2006. The aim of this study is development of rapid constructions of bridge superstructure for maglev. At present, precast deck is widely used because of its superiority to cast-in-place concrete on quality and the term of works. The research group suggested basic systems of maglev guideway with PSC-U type and trapezoidal open steel box type girder, and precast deck, cooperating with Korea Railroad Research Institute, the managing institute of the 3-1 subject. In this study, a mock-up consisted of girders, decks and rail was fabricated and test was performed for constructability, serviceability and maintenance evaluation of PSC U-type girder, precast deck, and new guide rail system.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.16 no.4
• /
• pp.387-402
• /
• 2014

In congested urban areas, constructions of tunnel structures have became necessary due to a lack of surface space. The excavation of any tunnel generated the ground disturbances of surrounding ground and displacements is major concern. Therefore, a study of tunnel stability is necessary. In this study, the authors have investigated the stability and failure pattern of tunnel through the model tunnel test. In this study, the close range photogrammetry was used to measure the ground deformation. The measured data was converted to displacement vectors and contours. And then it compared to FE analysis and empirical formula. In addition, this study presented the comparison between steel pipe reinforced model tunnel and unreinforced model tunnel. The ground deformation for both the steel pipe reinforced model tunnel and the unreinforced model tunnel was analysed.

• Journal of the Society of Naval Architects of Korea
• /
• v.29 no.3
• /
• pp.21-32
• /
• 1992

Numerical solutions are presented for solving the free surface flow created by a three-dimensional body moving beneath the free surface with constant velocity at an angle of attack. The solution is obtained using a panel method based on the perturbation potential, which employs Havelock sources and normal dipoles distributed on the body surface and Havelock normal dipoles in the wake downstream of the trailing edge. A pressure Kutta condition with an iterative solution procedure is implemented to satisfy equal pressure condition on the upper and lower surfaces at the trailing edge. Numerical calculation examples in the present paper include an ellipsoid at zero angle of attack, a rectangular planform wing at a small angle of attack in the limit of zero Froude number and then free surface flows and hydrodynamic forces acting on the submerged spheroid and parabolic strut are calculated. Discussions are made about the validity of the present method.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 1998.04a
• /
• pp.17-17
• /
• 1998

연소반응을 가지는 후류(wake)는 가스터빈 연소실의 flame holder 등에서 발생한다. 후류유동의 안정성 혹은 불안정성은 이러한 유동에 있어서 많은 영향을 끼치므로 상당히 중요하다. 본 연구는 위와 같이 연소 반응에 의한 밀도구배를 가지는 후류유동에 대하여 불안정성 해석을 수행하였다. 교란에 대한 지배방정식은 Navier-Stokes 방정식에서 점성항을 제외한 Euler 방정식을 고려하였다. 충류유동의 압력은 일정하다고 가정하였다. 교란 방정식을 유도하기 위하여 충류 유동이 평행하여 유동 방향에 수직한 방향의 구배만이 존재한다고 가정하였다. 모든 변수들은 충류 유동의 값과 움직이는 파장의 형태를 가지는 작은 교란의 합으로 생각하여 압력에 대한 교란방정식을 구하며, shooting법과 Newton-Raphson법에 근거를 두는 반복법을 사용하여 풀었다. 불안정성 해석을 수행하는 기본 유동의 속도장 및 온도장은 불안정성 해석을 수행하는 기본 유동의 속도장 및 온도장은 비압축성의 경우 우선 Gaussian Profile 가정함과 동시에 연소반응을 포함하는 유동장을 보다 정확히 구하기 위하여 Navier-Stokes 방정식으로부터 구한 결과를 사용하였다. 연소반응을 포함하는 유동장을 구할 때에는 해석상 편의를 위해 예혼합물질은 이상기체로, 화학반응은 1단계의 비가역반응으로 가정하였으며, 반응열로 인한 부력의 효과는 무시하였다. 위와 같은 유동장을 가지고 불안정성 해석을 수행한 결과 후류유동은 두 개의 변곡점을 가지며 sinuous 모드와 varicose모드의 두 개의 불안정성 모드가 있음을 보였다. 밀도 변화가 있는 경우나 밀도 변화가 없는 경우 모두 sinuous 모드의 가장 불안정한 모드가 varicose 모드의 가장 불안정한 모드보다 더 불안정함을 보여주어 후류 유동은 자유 유동에 가까운 위상 속도를 가지는 sinuous 모드에 의해 지배될 것임을 예측할 수 있다. 연소반응이 완전연소에 가까울수록 그리고 압축성 효과가 클수록 유동내부의 온도가 증가하고 점성 또한 증가하여 후류유동은 안정됨을 알 수 있었다 유동변수들의 contour로부터 유동의 특성을 예측한 결과 baroclinic 항이 dilatational 항보다 상대적으로 크며, 중심선 상하에 생기는 vortex를 더욱 성장시킬 것으로 생각된다.

• Korean Chemical Engineering Research
• /
• v.48 no.2
• /
• pp.178-184
• /
• 2010

The aim of this work is the fabrication of polyelectrolyte microcapsules composed of biocompatible polymers such as chitosan, heparin and alginate, to encapsulate the fluorescein isothiocyanate(FITC)-albumin, and to investigate the protein release behavior therefrom. Polyelectrolyte capsules with 4-layer structures could be prepared with biocompatible materials by oppositely charged adsorption using melamin-foramide as a template. Transmission electron microscope(TEM), scanning electron microscope(SEM) and optical microscope confirmed hollow capsule structures. Protein release before and after encapsulation was monitored with a UV-Vis spectrometer. Microcapsules have different behaviors depending on the kind of polyelectrolyte polymers, chitosan-heparin capsules or chitosan-alginate capsules. In conclusion, the polyelectrolyte multilayer shells can be switched between an open and closed state by means of tuning the pH value.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.28 no.11
• /
• pp.924-927
• /
• 2017

This paper presents a 6~18 GHz 8-bit true time delay (TTD) circuit. The unit delay circuit is based on m-derived filter with relatively constant group delay. The designed 8-bit TTD is implemented with two single-pole double-throw (SPDT) switches and seven double- pole double-throw (DPDT) switches. The reflection characteristics are improved by using inductors. The designed 8-bit TTD was fabricated using $0.18{\mu}m$ CMOS. The measured delay control range was 250 ps with 1 ps of delay resolution. The measured RMS group delay error was less than 11 ps at 6~18 GHz. The measured input/output return losses are better than 10 dB. The chip consumes zero power at 1.8 V supply. The chip size is $2.36{\times}1.04mm^2$.

• Journal of Life Science
• /
• v.16 no.1
• /
• pp.6-11
• /
• 2006

The waste water from a milk factory was investigated for possibility of use to the production of citric acid by cells of Aspegillus niger ATCC 9142. The addition of $Mn^{2+},\;Fe^{2+}\;and\;Cu^{2+}$ ions to waste increased citric acid production steadily, but addition of metal ion $Mg^{2+}$ decreased the citric acid production. The amount of produced citric acid by Aspegillus niger ATCC 9142 with addition 50 g/1 and 100 g/1 of reducing sugar in milk factory waste water were 7.2 g/1 and 16.5 g/1 respectively. Mathematical model was simulated for their predictability of cell growth, citric acid production and substrate consumption rate and coincided with experimental data.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.11B
• /
• pp.709-717
• /
• 2007

Pricing a network service aims for congestion control of the network as well as economic efficiency. A monopolistic supplier providing users with a network service on a shared link needs a pricing schedule that maximizes revenue under the link's bandwidth constraint and guarantees the bandwidth purchased by the users. In that case, nonlinear pricing is an efficient scheme which meets both requirements. This study reviews how nonlinear pricing can be applied to the network service under the constraint and shows that the nonlinear pricing may result in a fixed unit price of bandwidth as linear pricing when demand characteristics of the users follow a power law. Also, the way how the provider with incomplete information on the demand distribution seeks for the optimal pricing from the degree of the network congestion is introduced and the relationship between the development direction of the Internet and internet pricing is considered based on the results of the study.