• Proceedings of the Korea Information Processing Society Conference
• /
• 2015.04a
• /
• pp.424-427
• /
• 2015

근래 들어 모바일 기기의 시스템을 장악하여 사용자의 기밀 정보를 빼내는 악성 행위의 한 방법으로 Code Reuse Attack (CRA)이 널리 사용되고 있다. 이와 같은 CRA를 막기 위하여 call-return이 일어날 때마다 이들 address를 비교해 보는 shadow stack과 branch에 대한 몇 가지 규칙을 두어 CRA 를 탐지하는 branch regulation과 같은 방식이 연구되었다. 우리는 shadow stack과 branch regulation을 종합하여 여러 종류의 CRA를 적은 성능 오버헤드로 탐지할 수 있는 CRA Detection System을 만들고자 한다. 이를 위하여 반드시 선행 되어야 할 연구인 바이너리 파일 분석과 meta-data 생성 및 압축 기술을 제안한다. 실험 결과 생성된 meta-data는 압축 기술을 적용하기 전보다 1/2에서 1/3 가량으로 그 크기가 줄어들었으며 CRA Detection System의 탐지가 정상적으로 동작하는 것 또한 확인할 수 있었다.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.22 no.1
• /
• pp.45-52
• /
• 2009

In this paper, a guideline for designing breakwater in wave loads and in seismic loads is proposed. A simple model structure in breaking wave zone is examined using Morison equation in consideration with the effect of an impact load, for evaluation of the wave loads. As the impact load effect is not significant, pressure distributions according to Goda are applied for evaluation of wave loads on breakwater. Structural behavior of breakwater in wave loads can be obtained using the Goda method, as well. For seismic analysis, Ofunato and Hachinohe models, as well as an artificial seismic acceleration loads model, are adopted. Soil-structure interaction analysis is carried out to find the seismic load effect. It is found that, in certain cases, structural deformation in wave loads is in the same level as deformation that in seismic loads. Thus, it is our recommendation that these two loads are considered at the same level in breakwater design.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2012.05a
• /
• pp.472-476
• /
• 2012

부정류 해석프로그램을 이용하여 각 절점에서 갑작스런 유량의 변화가 일어났다고 가정하여 부정류 해석을 수행하였다. 각 절점에서 소요유량(demand)이 추가로 발생할 경우에 대해서 부정류 해석을 수행하였다. 추가 소요유량이 발생하였다는 것은 그 절점에서의 누수량으로 간주할 수 있으므로 실제 일어날 수 있는 누수에 대한 민감도 분석을 하여 센서의 설치지점을 선정한다면 보다 더 정확한 모니터링 지점선정이 될 것으로 판단된다. 다음과 같은 두 가지 방법을 통하여 모니터링 최적지점 선정방법을 비교하였다. 첫 번째는 한 절점에서 갑작스런 소요유량의 변화가 발생하면 그로인해 부정류가 발생한다. 이때 각 절점에서의 압력변위와 유량변화가 발생한 절점의 압력비를 합하고 절점의 수로 평균하여 민감도 분석을 수행한다. 특정 절점에서 유량변화로 발생한 압력의 변화가 다른 절점에 얼마나 영향을 미치는지에 대한 기여도를 부정류 해석결과를 이용하여 정량적으로 산정하는 방법이다. 특정 절점에서 유량의 변화가 생겼으므로 부정류해석 결과는 누수가 없을 때 최초 계산하였던 각 절점에서의 압력이 크게 유동하게 된다. 이때의 최고치와 최저치의 차는 압력변위이고 최초압력과의 비를 합산하고 절점의 수로 평균한 값을 비교하였다. 이렇게 계산된 값이 가장 큰 절점이 모니터링 지점으로 우선 선정된다. 두 번째 방법은 유량변화로 발생한 절점의 압력변위와 그 절점의 최초압력의 비를 산정하는 방법이며 부정류해석결과를 이용하였다. 한 절점에서 유량을 변화시키고 부정류로 인해 발생하는 압력변위와 최초압력의 비를 합산하고 절점수로 평균하여 민감도 분석을 수행한 것이다. 어느 절점의 압력변위와 최초압력의 비를 정량적으로 산정하여 민감도를 분석하고 비교하였다.

• Composites Research
• /
• v.20 no.1
• /
• pp.15-22
• /
• 2007

As a fundamental approach to studying elastic wave behaviors in fiber-reinforced composites, this paper introduces the analytical method to predict the modes, directions, and amplitudes of all reflected waves that are generated by free-surface reflection in fiber-reinforced composites. The paper also explores a new phenomenon where a reflected wave that is predicted to exist in accordance with the slowness surface may disappear. This may occur when the angle of incidence of a quasi-shear wave exceeds a newly defined critical angle, named the third critical angle. It is hoped that the analytical approach introduced in this paper will provide an easy-to-follow guideline for researchers in the relevant area such as ultrasonic nondestructive testing.

• Journal of environmental and Sanitary engineering
• /
• v.5 no.1
• /
• pp.14-27
• /
• 1990

The vegetation of Pyeongil island was ecologically investigated four times from July, 1979 to May, 1981. The vegetation of this island consisted of 80 families, 172 genera, 173 species, 21 varieties and 4 forma. Evergreen, broad-leaved trees comprised a total of 11 species including Eurya japonica Thunb. and Trachelostermum asiaticum var. intermedium Nakai. The distribution of evergreen, broad-leaved trees was very spares in this island as a whole. It may also be considered that evergreen, broad-leaved trees, such as Camellia japonica Linne (30cm-35cm in diameter at breast height), Pittosporum fobira Aiton, Eurya japonica Thunb. and Trachelostermum asiaticum var. intermedium Nakai which might have been dominant species on this island, have undergone artificial succession caused by the planting of Pinus thunbergii Parl. dominant species of today. This was due to human interferences for fuel, building, grazing and farmland use. Especially, the vegetation of this island seems to have been severely destroyed by high population density, farming rate and by rapid increase in the area of cultivated land. However, the forest of Pinus thunbergii Parlatore at Wolsong-ri is worthy of conservation. The five species of seaside plants (Ixeris dentata (Thunb.) Nakai, Rosa rugosa Thunb., Carex laticeps Clarke, Calystergia soldanella Reom. et Schult. and Phelloterus littoradis) were distributed in the vicinity of sand beaches leading to Wolsong-ri, Dongbaeg-ri and Sadong-ri.

• School Mathematics
• /
• v.15 no.2
• /
• pp.315-335
• /
• 2013

Probability has distinctive characteristics which are different from other areas of school mathematics. The critical change can be noticed in the domain, 'probability and statistics' of 2009 revised national curriculum for elementary school mathematics. This indicates that the concept of chance is supposed to be taught in the 5~6 grade band instead of the definition of probability which is moved to the middle school level. The purpose of this study is to seek desirable methods for teaching the concept of chance which reflect the achievement criteria and the attention point for teaching and learning of the curriculum at the point of time when textbooks haven't yet been developed. To do this, based on theoretical considerations and comparative analysis of the curricula in the longitudinal - latitudinal dimensions respectively, the validity of the latest curriculum change was confirmed and several learning activities were devised. And then two lessons were planned for applying these activities to eight fifth graders and were implemented along the plan. As a result, the relevance of the learning activities was examined and students' difficulties in learning the concept of chance with educational implications were discussed.

• Journal of the Korean Geographical Society
• /
• v.39 no.5 s.104
• /
• pp.804-818
• /
• 2004

As spatial data resources become more abundant, the potential for conflict among them increases. Those conflicts can exist between two or many spatial datasets covering the same area and categories. Therefore, it becomes increasingly important to be able to effectively relate these spatial data sources with others then create new spatial datasets with matching geometry and topology. One extensive spatial dataset is US Census Bureau's TIGER file, which includes census tracts, block groups, and blocks. At present, however, census maps often carry information that conflicts with municipally-maintained detailed spatial information. Therefore, in order to fully utilize census maps and their valuable demographic and economic information, the locational information of the census maps must be reconciled with the more accurate municipally-maintained reference maps and imagery. This paper formulates a conceptual framework and two map models of map conflation to make geometrically and topologically consistent source maps according to the reference maps. The first model is based on the cell model of map in which a map is a cell complex consisting of 0-cells, 1-cells, and 2-cells. The second map model is based on a different set of primitive objects that remain homeomorphic even after map generalization. A new hierarchical based map conflation is also presented to be incorporated with physical, logical, and mathematical boundary and to reduce the complexity and computational load. Map conflation principles with iteration are formulated and census maps are used as a conflation example. They consist of attribute embedding, find meaning node, cartographic 0-cell match, cartographic 1-cell match, and map transformation.

• Proceedings of the Korean Information Science Society Conference
• /
• 2006.10d
• /
• pp.786-790
• /
• 2006

현재 많은 사람들의 관심을 받고 있는 유비쿼터스 시스템(Ubiquitous System)이 주는 가장 큰 이점은 언제 어디서나 원하는 서비스를 사용할 수 있는 것이다. 따라서 이를 사용가능하게 하기 위해서는 유비쿼터스 시스템이 무선네트워크를 지원하여야 하며 또한 소형의 장치로 사용자가 간편하게 사용할 수 있어야 한다. 그러나 이러한 특성들로 인하여 유비쿼터스 시스템은 네트워크 불량, 자원 부족 등과 같은 문제점을 가지고 있으며 이것은 사용자 서비스의 질과 직접적으로 연결된다. 더욱이 이것으로 인하여 사용자가 서비스 사용에 불편을 겪는다면 유비쿼터스 시스템 사용에 대한 신뢰도는 떨어질 것이다. 이런 문제를 해결하기 위해서는 유비쿼터스 시스템에서 일어날 수 있는 결함을 분석하고 이에 대한 적절한 조치를 취하여 사용자가 서비스를 사용하는데 있어서 불편을 초래하지 않아야 한다. 따라서 본 논문에서는 유비쿼터스 시스템에서 사용될 수 있는 결함 분석기를 개발하였으며 또한 실제로 유비쿼터스 시스템 관리 유틸리티에 적용하였다. 본 결함 분석기에서는 메모리 결함, 배터리 결함, 네트워크 결함, 및 heartbit 결함에 대하여 정의하고 결함을 감지할 수 있도록 하였으며 또한 Java Exception 메시지를 이용하여 조기에 결함을 분석할 수 있도록 개발하였다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.4
• /
• pp.521-526
• /
• 2017

In the GTA welding process of Al 7075 alloy using different types of filler metals, the tensile test and micro-hardness test were conducted to evaluate the mechanical characteristics. Also, the radiographic test result showed that the weld met the criterion of level 1 in accordance with KS D 0242 for verifying the welding integrity and there were no welding defects. The tensile test result obtained using Al 7075 as a filler metal showed that the material was fractured in the weld zone. The tensile strengths of the materials using Al 7075 and ER 4043 as the filler metal were about 240MPa and 253MPa, their yield strengths were about 132MPa and 120MPa and their elongation percentages were 6.6% and 13%, respectively. The micro-hardness value of the deposited metal zone when using Al 7075 as the filler metal was Hv 132. However, the micro-hardness of the material using ER4043 as the filler metal was about 24% lower than that using Al 7075. When the chemical composition of the filler metal is the same as that of the material itself, fracture can occur in the deposited metal zone. Therefore, it is not desirable to use the same material as the filler metal for the welding of Al 7075 alloy. Moreover, the use of Al-Si based ER 4043 as a filler metal is more desirable than using the same material as a filler metal for welding Al 7075.

• Korean Security Journal
• /
• no.10
• /
• pp.243-272
• /
• 2005

All measures related to the safety of the casino facilities guarantee safety of facilities that are targets of security guards, protect lives and properties, minimize risks of artificial and natural disaster and crimes. In summary, plan for responding to safety and accidents should be developed not only for the casino facilities but also for the facilities of annexed buildings, and lives and properties of customers and employees. Determine areas in the casino facilities that are prone to accidents and set around-the-clock guard in the areas or maintain surveillance with CCTV and prevent accidents through continuous patrol. These are the most basic and the most important requirements in safety. In addition, casinos which prompt gambling are causing economic and psychological treats to families. To resolve these social issues, casinos have adopted limited entrance system. To support this system, new forms of machine security systems such as video automatic recognition system of fingerprint pattern recognition system should be adopted too. In addition, security guards in casino facilities need to instill themselves with a sense of ownership as well as a strong sense of mission to do the best for customer security and to protect the company assets and employees and manage accidents that could occur without notice. Security guards should do their best to enable manage accidents that could occur without notice. Security guards should do their best to enable tourists who are on the rise due to increase in advanced country-style tourism and leisurely activities to get the utmost satisfaction from the casinos, and as a leader of private security company, establish the foundation for security based on the characteristics of security in Korea.