• Geophysics and Geophysical Exploration
• /
• v.14 no.4
• /
• pp.274-281
• /
• 2011

We analysed ground motions form Mw 4.3 earthquake around Backryoung Island for the seismic source focal mechanism and horizontal response spectrum. Focal mechanism of the Backryoung Islands area was compared to existing principal stress orientation of the Korean Peninsula and horizontal response spectrum was also compared to those of the US NRC Regulatory Guide (1.60) and the Korean National Building Code. The ground motions of 3 stations, including vertical, radial, and tangential components for each station, were used for grid search method of moment tensor seismic source. The principal stress orientation from this study, ENE-WSW, is consistent fairly well with that of the Korean Peninsula. The horizontal response spectrum using 30 observed ground motions analysed and then were compared to both the seismic design response spectra (Reg Guide 1.60), applied to the domestic nuclear power plants, and the Korean Standard Design Response Spectrum for general structures and buildings (1997). Response spectrum of 30 horizontal ground motions were used for normalization with respect to the peak acceleration value of each ground motion. The results showed that the horizontal response spectrum revealed higher values for frequency bands above 3 Hz than Reg. Guide (1.60). The results were also compared to the Korean Standard Response Spectrum for the 3 different soil types and showed that the vertical response spectra revealed higher values for the frequency bands below 0.8 second than the Korean Standard Response Spectrum (SD soil condition). However, through the qualitative improvements and quantitative enhancement of the observed ground motions, the conservation of horizontal seismic design response spectrum should be considered more significantly for the higher frequency bands.

• Journal of the Korea Institute of Building Construction
• /
• v.13 no.5
• /
• pp.434-440
• /
• 2013

Generally, the envelope of a freeform building is composed of a structure made with rectangular or C-shaped steel pipe, and steel or aluminum panel finishes on the structure. However, these construction methods increase material loss and cost and time. There are also numerous cases of misunderstanding of design and difficulties in construction, which frequently cause construction errors. Such construction errors decrease construction productivity, resulting in poor construction quality and the need for rework, as well as cost and time overruns. To solve the problem, this study proposes a 3D coordinate control technology for freeform structure implemented through a CNC(Computerized Numerical Control) Twisted tube method, and by extension, develops a BIM-based envelope construction method for freeform building.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.26 no.1
• /
• pp.39-45
• /
• 2018

Research on FA(Fly ash) is actively carried out, while the research on BA(Bottom ash) is not so, and research on BA recycling field is urgently required. Therefore, in this study, we investigated the lightweight and thermal insulation characteristics of BA mortar by comparing BA mortar made with porous dry BA(air-cooled) and general mortar. To investigate the lightweight of BA, density test, unit volume mass test and SEM(Scanning Electron Microscope) test were performed. BA mortar and general mortar molds were prepared for the thermal insulation test at room temperature and humidity environment determined by KS A 0006 and they were dried at the temperature of $105{\pm}2^{\circ}C$ until the weight became constant. As a result of the lightweight test, the lightweight of BA mortar is about 30% lighter than the general mortar. Therefore, BA is expected to contribute to reduce the building load when used as building material. As a result of thermal insulation test, the thermal conductivity of BA mortar is about 30% better than that of general mortar.

• Water for future
• /
• v.55 no.10
• /
• pp.72-79
• /
• 2022

• Water for future
• /
• v.56 no.2
• /
• pp.62-68
• /
• 2023

• Water for future
• /
• v.57 no.1
• /
• pp.6-15
• /
• 2024

• Journal of Korean Association for Spatial Structures
• /
• v.11 no.4
• /
• pp.71-78
• /
• 2011

Interactive media are applied to inner and outer space of small public space to enhance for the interaction between the spectator and works, also widely used in the exterior wall by LED and projector for advertisement. In the other hand, case studies of interactive media for large space have not less accomplished than those of buildings and public spaces. Thus, these studies analyzed 11 large structure examples by display, content, interface, and technology device by comparison of those cases of ordinary building public space. First interactive media for large space are found to be contents(39%), and next one is play(27%), advertisement(17%) and message(17%).

• The Korean Journal of Archival Studies
• /
• no.49
• /
• pp.77-119
• /
• 2016

A modern architectural building is a cultural heritage, which is also part of our history until the present. Documentation is thus considered an irreplaceable method to preserve our cultural heritage as it may be the last resort of preservation. The study analyzed the Historic American Buildings Survey (HABS) on the Heritage Documentation Programs of the National Park Service. Based on the analysis of the comparison and documentation of the modern architectural building implemented by the Cultural Heritage Administration, the study suggested improvement plans from three different perspectives. First, specifically detailed regulations of the legal system are supposed to be used for the implementation of the documentation of modern architectural buildings. Second, it is suggested that a general plan for continuous documentation be made. Last, by setting up a collection method, an information service needs to be provided for the public.

• 건축구조
• /
• v.17 no.1
• /
• pp.78-83
• /
• 2010

포스트텐션(Post-Tension, PT) 공법은 일반적으로 텐던(tendon)으로 알려진 고강도 강선 또는 봉을 이용하여 콘크리트 또는 다른 재료를 보강하는 방법으로 많은 경우 건설현장의 제약과 건축적인 요구에 의해 다른 공법으로 해결이 불가능한 경우에 대해 대안으로 사용되어 온 공법이다. 또한 포스트텐션 시스템은 조립과 설치에 특수한 지식과 경험이 필요하였다. 그러나 최근 건설시장은 신소재와 신공법의 발달과 함께 친환경 및 경제성에 대한 요구가 증가함에 따라 장스팬 및 층고절감이 가능한 포스트텐션 공법을 일반 건축물에 적용하는 사례가 점차 늘어나는 추세에 있다. 따라서 본 지에서는 3회에 걸쳐 포스트텐션 공법과 설계 및 시공사례 등을 소개하고자 한다. 1. 포스트텐션 공법 소개 2. 포스트텐션 공법의 경제성 비교 3. 포스트텐션공법의 설계사례와 설계시 고려사항

• Journal of Cadastre & Land InformatiX
• /
• v.53 no.1
• /
• pp.83-105
• /
• 2023

A robot-friendly building certification system was established in 2022 to accommodate the growing number of service robots introduced into buildings. However, this system primarily targeted office buildings, with limitations in applying other functional architectures. To address this problem, we developed a certification model of a robot-friendly environment to extend the existing system to apartment complexes. Using focus group interviews and the analytic hierarchy process, we established 28 evaluating items categorized as (a) architecture and facility design, (b) networks and systems, (c) building operations management, and (d) support for robot activity and other services. These indicators were weighted based on their relative importance within and between categories, resulting in scores ranging from 1 to 18 points and a total of 176 points. According to evaluations with the 28 items, each apartment complex could be graded as "best," "excellent," or "general" based on its total achieved scores. This study is significant, as we present the world's first certification model of a robot-friendly environment for apartment complexes that considers human-robot interactions