• Tuberculosis and Respiratory Diseases
• /
• v.46 no.4
• /
• pp.542-547
• /
• 1999

Background: Decision in mediastinal lymph node involvement of lung cancer by CT scan is very important and valuable for the treatment planning and prognosis prediction. In general, long diameter of mediastinal lymph node more than 15mm is used as criterion of lung cancer involvement. Adenocarci-noma has a tendency of early distant metastasis and micrometastasis, so adenocarcinoma may involve lymph node earlier and cannot be detected before lymph nodes are enlarged enough. The authors tried to determine the difference between two size criteria(15mm, 10mm) in adenocarcinoma for the detection of cancer involvement. Methods: Numbers of sample are 60 cases(male 46, female 14, median age: 61.5 years). According to pathology, squamous cancer 41, large cell cancer 2, adenocarcinoma 17. According to TNM stage, I 23, III 24, IIIA 13. Results : Mean long diameter of lymph node involvement is 16.0($\pm8.0$) mm in non-adenocarcinoma group, and that of adenocarcinoma group is 12.0($\pm3.2$) mm(p<0.05). If long diameter of lymph node larger than 15mm as involvement criterion is applied, sensitivity, specificity, positive predictive index, negative predictive index, accuracy of nonadenocarcinoma group are 54%, 100%, 100%, 83%, 86%, and those of adenocarcinoma group are 43%, 90%, 75%, 69%, 71%. If long diameter of lymph node larger than 10mm as involvement criterion is applied, sensitivity, specificity, positive predictive index. negative predictive index. accuracy of nonadenocarcinoma group are 65%, 77%, 61%, 92%, 79%, and those of adenocarcinoma group are 100%, 80%, 78%, 100%, 88%. Conclusion: Long diameter of lymph node larger than 10mm is more valuable criterion as lymph node involvement in adenocarcinoma of lungs.

• Tuberculosis and Respiratory Diseases
• /
• v.60 no.1
• /
• pp.72-75
• /
• 2006

Background : This report reviews our experience with persistent air leaks in the peumothorax that were not considered candidates for surgical treatment in order to evaluate the efficacy and risks of the OK-432 plus autoblood or OK-432 pleurodesis. Material & Methods : From March 2004 to July 2005, 8 consecutive patients who had an air leak in the pneumothorax over 5 days and had been treated with OK-432 plus autoblood or OK-432 pleurodesis. The patients were not considered candidates for surgical treatments because the chest CT findings revealed severe chronic lung disease with multiple bullae and/or bullous changes. A prolonged air leak with/without dead space was treated with either OK-432 plus autoblood or OK-432 pleurodesis. The efficacy and side effects of OK-432 pleurodesis were assessed by determining the duration of the air leak, the number of pleurodesis, the patients' symptoms, measurements of the white blood cell count and the c-reactive protein level. Results : All of eight patients were male and the mean age was $72.4{\pm}8.5$. The mean number of pleurodesis was $1.9{\pm}1.1$ and the mean duration of the air leak was $4.6{\pm}4.6days$ after pleurodesis. Side effects after pleurodesis were encountered in 7 patients, which included a chilling sensation in 7 cases, chest pain in 5 cases, headache in 3 cases, local heat sensation in 2 cases, and fever in 1 case. Leukocytosis was observed in 6 patients, and the mean of WBC count and CRP were $14500{\pm}2100$ and $21.9{\pm}11.4mg/dL$, respectively. Conclusion : Either OK-432 plus autoblood or OK-432 pleurodesis has acceptable side effects, and can be considered a treatment option for persistent air leaks in the pneumothorax that are not candidates for surgical treatment.

• The Journal of Korean Society for Radiation Therapy
• /
• v.16 no.1
• /
• pp.29-37
• /
• 2004

Purpose : A rectum and a bladder should be carefully considered in order to decrease side effects when HDR patient of uterine cervix cancer. Generally speaking, the value of dosimeter at a rectum and a bladder only depends on the value of a planning equipment, while some analyses of the value of dosimetry at rectum with TLD has been reported Or the contrary, it is hardly to find a report with in vivo dosimetry(diode detector). On this thesis, we would like to suggest the following. When a patient of uterine cervix cancer is in therapy, it is helpful to put a diode detector inside of a rectum in order to measure the rectal dose Based upon the result of the dosimetry, the result can be used as basic data at decreasing side effects. Materials and Methods : Six patients of uterine cervix cancer(four with tandem and ovoid, one with cylinder, and the other one with tandem and cylinder) who had been irradiated with HDR. Ir-192 totally 28 times from February 2003 to June 2003. We irradiated twice in the same distant spots with anterior film and lateral film whenever we measured with a diode detector. Then we did planning and compared each film. Results : The result of the measurement 4 patients with a diode detector is the following. The average and deviation from 3 patients with tandem and ovoid were $274.1{\pm}13.4cGy$, from 1 patient with tandem and ovoid were $126.1{\pm}7.2cGy$, from 1 patient with cylinder were $99.7{\pm}7.1cGy$, and from 1 patient with tandem and cylinder were $77.7{\pm}11.5cGy$. Conclusion : It is difficult to predict how the side effect of a rectum since the result of measurement with a diode detector depends on the state of a rectum. According to the result of the study, it is effective to use a TLD or an in vivo dosimetry and measure a rectum in order to consider the side effect. It is very necessary to decrease the amount of irradiation by controlling properly the duration of the irradiation and gauze packing, and by using shield equipments especially when side effects can be expected.

• The Journal of Korean Society for Radiation Therapy
• /
• v.21 no.1
• /
• pp.17-23
• /
• 2009

Purpose: In treating head and neck cancer, it is very important to irradiate uniform dose on the junction of the bilateral irradiation field of the upper head and neck and the anterior irradiation field of the lower neck. In order to improve dose distribution on the junction, this study attempted to correct non uniform dose resulting from under dose and over dose using the field-in-field technique in treating the anterior irradiation field of the lower neck and to apply the technique to the treatment of head and neck cancer through comparison with conventional treatment. Materials and Methods: In order to examine dose difference between the entry point and the exit point where beam diffusion happens in bilateral irradiation on the upper head and neck, we used an anthropomorphic phantom. Computer Tomography was applied to the anthropomorphic phantom, the dose of interest points was compared in radiation treatment planning, and it was corrected by calculating the dose ratio at the junction of the lower neck. Dose distribution on the junction of the irradiated field was determined by placing low-sensitivity film on the junction of the lower neck and measuring dose distribution on the conventional bilateral irradiation of the upper head and neck and on the anterior irradiation of the lower neck. In addition, using the field-in-field technique, which takes into account beam diffusion resulting from the bilateral irradiation of the upper head and neck, we measured difference in dose distribution on the junction in the anterior irradiation of the lower neck. In order to examine the dose at interest points on the junction, we compared and analyzed the change of dose at the interest points on the anthropomorphic phantom using a thermoluminescence dosimeter. Results: In case of dose sum with the bilateral irradiation of the upper head and neck when the field-in-field technique is applied to the junction of the lower neck in radiation treatment planning, The dose of under dose areas increased by 4.7~8.65%. The dose of over dose areas also decreased by 2.75~10.45%. Moreover, in the measurement using low-sensitivity film, the dose of under dose areas increased by 11.3%, and that of over dose areas decreased by 5.3%. In the measurement of interest point dose using a thermoluminescence dosimeter, the application of the field-in-field technique corrected under dose by minimum 7.5% and maximum 17.6%. Thus, with the technique, we could improve non.uniform dose distribution. Conclusion: By applying the field-in-field technique, which takes into account beam divergence in radiation treatment planning, we could reduce cold spots and hot spots through the correction of dose on the junction and, in particular, we could correct under dose at the entry point resulting from beam divergence. This study suggests that the clinical application of the field-in-field technique may reduce the risk of lymph node metastasis caused by under dose on the cervical lymph node.

• Tuberculosis and Respiratory Diseases
• /
• v.44 no.3
• /
• pp.621-628
• /
• 1997

Background : As the pleural inflammation progresses, exudative pleural fluid becomes loculated rapidly with pleural thickening. Complete drainage is important to prevent pleural fibrosis, entrapment and depression of lung function. Intrapleural urokinase instillation therapy has been advocated as a method to facilitate drainage of gelatinous pleural fluid and to allow enzymatic debriment of pleural surface. This study was designed to investigate the predictors of effectiveness of intrapleural urokinase in the treatment of loculated pleural effusion. Method : Thirty-five patients received a single radiographically guided pig-tail catheter ranging in size from 10 to 12 French. Twenty-two patients had tuberculous pleural effusions, and 13 had non-tuberculous postpneumonic empyemas. A total of 240,000 units of urokinase was dissolved in 240 ml of normal saline and the aliquots of 80mL was instilled into the pleural cavity via pig-tail catheter per every 8hr. Effectiveness of intrapleural urokinase instillation therapy was assessed by biochemical markers, ultrasonography, and technical details. A greater than 50% improvement on follow-up chest radiographs was defined as success group. Result : Twenty-seven of 35 (77.1%) patients had successful outcome to urokinase instillation therapy. Duration of symptoms before admission was shorter in success group ($11.8{\pm}6.9day$) than in failure group ($26.62{\pm}16.5day$) (P<0.05). Amount of drained fluid during urokinase therapy was larger in success group ($917.1{\pm}392.7ml$) than in failure group ($613.8{\pm}259.7ml$) (P<0.05). Pleural fluid glucose was higher in success group ($89.7{\pm}35.9mg/dl$) than in failure group ($41.2{\pm}47.1mg/dl$) (P<0.05). Pleural fluid LDH was lower in success group ($878.4{\pm}654.3IU/L$) than in failure group ($2711.1{\pm}973.1IU/L$) (P<0.05). Honeycomb septated pattern on chest ultrasonography was observed in six of eight failure group, but none of success group (P<0.05). Conclusion : Longer duration of symptoms before admission, smaller amount of drained fluid during urokinase therapy, lower glucose value, higher LDH value in pleural fluid examination, and honeycomb septation pattern on chest ultrasonograph were predictors for failure group of intrapleural urokinase instillation therapy.

• Restorative Dentistry and Endodontics
• /
• v.31 no.4
• /
• pp.300-311
• /
• 2006

The purpose of this study is to evaluate prospectively the effect of different bonding systems and retention grooves on the clinical performance of resin restorations in non-carious cervical lesions (NCCLs). Thirty-nine healthy adults who had at least 2 NCCLs in their premolar areas were included in this study. One hundred and fifty teeth were equally assigned to six groups: (A) Scotchbond Multi-Purpose (SBMP, 3M ESPE, St. Paul, MN, USA, 4th generation bonding system) without retention grooves; (B) SBMP with retention grooves; (C) BC Plus (Vericom Co., Anyang, Gyeonggido, Korea, 5th generation bonding system) without retention grooves; (D) BC Plus with retention grooves; (E) Adper Prompt (3M ESPE, Seefeld, Germany, 6th generation bonding system) without retention grooves; (F) Adper Prompt with retention grooves. All cavities were filled with a hybrid composite resin. Denfil (Vericom Co., Anyang, Gyeonggido, Korea) by one operator. Restorations were evaluated at baseline and at 6-month recall, according to the modified USPHS (United States Public Health Service) criteria. Additionally, clinical photographs were taken and epoxy resin replicas were made for SEM evaluation. At 6-month recall, there were some differences in the number of alpha ratings among the experimental groups. But, despite the differences in the number of alpha ratings, there was no significant difference among the 3 adhesive systems (p < 0.05). There was also no significant difference between the groups with or without mechanical retention (p < 0.05). Follow-ups for longer periods than 6 months are needed to verify the clinical performance of different bonding systems and retention grooves.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.31 no.4 s.54
• /
• pp.337-342
• /
• 2005

The aim of this study was to evaluate the influence of different skin care ingredient concentrations on the effect of polyols and oils on the human skin moisturization and skin surface roughness. Polyols and oils were essential ingredients to make a skin care formulation. But these were still not understood how much concentration(s) were tested on human skin in the aspect of efficacy and sensory. We studied to examine various concentrations of ingredient by cosmetic companies using noninvasive methods. Polyols were composed of glycerol and butylene glycol (BG) as 1:1 ratio, and oils were hydrogenated polydecene, cetyl ethylhexanoate and pentaerythrityl tetraethylhexanoate (PTO(R), Stearinerie Dubois Fils Co., France) as 1:1:1 ratio. All compounds were tested $0{\sim}27%dml$ Polyols and $0{\sim}35%dml$ oils in O/W emulsions. We investigated the effect of water contents and the effect of stratum corneum roughness in forearm skin after application of compounds. Water contents of the skin measured by skin capacitance and skin surface roughness measured visual scoring of skin surface biopsy through the scanning electron microscopy. Water contents of the skin were highly related to amount of polyols (to 20%) and oils (to 12%). Correlation coefficients were 0.971 and 0.985 respectively (p<0.01), 2 h after application. Skin surface roughness was positively correlated with polyol contents in concentration dependent manner, and depend on oils up to 6%. The ratio of coefficient was 2.5 to 1 (polyol to oils) by regression analysis. Further studies will be conducted with other ingredients such as surfactants, lipids and aqueous materials, and with ether methods for noninvasive measurement.

• Korean Journal of Heritage: History & Science
• /
• v.47 no.2
• /
• pp.86-113
• /
• 2014

This study has researched the characteristics and elements of Chwibyeong (翠屛), a sort of trellis in the Joseon Dynasty through the old documents, and the original form of Chwibyeong at Juhapru (宙合樓) in Changdeuk Palace. The results were as follow. First, as the result of literatures analysis for Imwon-gyeongje-ji (林園經濟志) and Jeungbo-sallim-gyeongje (增補山林經濟), the plant screen was classified as kinds of support[frame] material, plants and methods of planting. It was found that the supports of Chwibyeong were made of bamboo or the material such as the Jinjangmok (眞長木: a stick of oak) and Giryu (杞柳: Salix purpurea var. japonica). The evergreen coniferous trees including Pinus densiflora, Taxus cuspidata and Thuja orientalis were mainly used for the plant material of Chwibyeong. The general planting method of Chwibyeong was to plant on the ground, but sometimes the container planting was also found on the artificial ground. Second, the term of 'Chwibyeong' in the literatures was used in only the screen made by evergreen trees, and the superordinate category term of it was indicated by 'byeong (屛)'. Therefore Chwibyeong was a compound word formed from 'chwi (翠)' which means the characteristics of evergreen and 'byeong' as tree screen which the support was made by bamboo. And Chwibyeong had semantic context which was combined with the literary symbolization to describe a landscape of green peak and Taoist ideology be inherent from 'twelve peaks of Musan[巫山十二峰]' in Sichuan sheng (四川省). Thirdly, the photograph of Chwibyeong at Juhapru taken by the 1880s, showed that Chwibyeong was made with coniferous trees and was almost 2 meters high. The Chwibyeong at Juhapru was removed during the Japanese colonial era, but a few yew trees(Taxus cuspidata) used for Chwibyeong are still remaining. And some Juniperus chinensis which the composition time is unclear, were cultivated while hung loose its branchs at the sides of Eosumun (魚水門). This Junipers were presumed to be planted by Japanese after Japanese annexation of Korea(1910), and it was judged that both of the roofs of Eosumun's side gates might have been transformed into Japanese style at the same time. Lastly, Chwibyeong at Juhapru was restored in 2008 but it was restored in wrong way from original form without precise research. Especially Chwibyeong was restored with Sasa boreralis which is damaged by frost, so it requires exertion that should revive the originals to plant original material as much as possible. And it needs the development of fabrication technique for Chwibyeong and the application to current landscape architecture.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.23 no.3
• /
• pp.83-91
• /
• 2019

The purpose of this study is to assess a fire-damaged concrete structure using a digital camera and image processing software. To simulate it, mortar and paste samples of W/C=0.5(general strength) and 0.3(high strength) were put into an electric furnace and simulated from $100^{\circ}C$ to $1000^{\circ}C$. Here, the paste was processed into a powder to measure CIELAB chromaticity, and the samples were taken with a digital camera. The RGB chromaticity was measured by color intensity analyzer software. As a result, the residual compressive strength of W/C=0.5 and 0.3 was 87.2 % and 86.7 % at the heating temperature of $400^{\circ}C$. However there was a sudden decrease in strength at the temperature above $500^{\circ}C$, while the residual compressive strength of W/C=0.5 and 0.3 was 55.2 % and 51.9 % of residual strength. At the temperature $700^{\circ}C$ or higher, W/C=0.5 and W/C=0.3 show 26.3% and 27.8% of residual strength, so that the durability of the structure could not be secured. The results of $L^*a^*b$ color analysis show that $b^*$ increases rapidly after $700^{\circ}C$. It is analyzed that the intensity of yellow becomes strong after $700^{\circ}C$. Further, the RGB analysis found that the histogram kurtosis and frequency of Red and Green increases after $700^{\circ}C$. It is analyzed that number of Red and Green pixels are increased. Therefore, it is deemed possible to estimate the degree of damage by checking the change in yellow($b^*$ or R+G) when analyzing the chromaticity of the fire-damaged concrete structures.

• Korean Journal of Heritage: History & Science
• /
• v.49 no.2
• /
• pp.56-69
• /
• 2016

Flame resistant treatment has been applied since 1973 for fire prevention in historical wooden buildings, but several problems, such as whitening and discoloration are constantly occurring in some Dancheong, in spite of evaluation criteria. It is supposed that these phenomena are caused by the stability issue of flame retardant, Dancheong production methods, the residue of chemicals, which were applied in the past, building location environments, etc., but no evaluation and cause inspection has been performed. Therefore, this study aims to verify the effect of flame retardant on Dancheong by producing Pseudo-samples and setting spatial and temporal environment conditions. Pseudo-samples of Dancheong were produced using three methods; the method specified in the Standard Specification of Properties; the method, which is generally used in the site and the traditional method. For different environment conditions of pseudo-samples, the areas were classified into a coastal area and an inland area and the places were classified into a sunny place and a wetland. After applying a flame retardant, annual variations were inspected for 12 months and change aspects were observed through scan and regular observation. In annual variation inspection, various variations like whitening, decolorization, dissolution and exfoliation were found and especially, whitening was most dominant. When the effect of flame retardant depending on the production methods was analyzed, whitening occurred in all the three production methods. It is supposed that this is because calcium(Ca) was contained in the coloring material of each production method and it reacted with phosphorous(P) of flame retardant. When the effect of flame retardant depending on the environment conditions was analyzed, whitening occurred more in the coastal area than in the inland area and it reduced in the building in a sunny place, which was constructed using the traditional method. It is supposed that this results from the humidity change and the difference of glue used in each production method. In conclusion, for using a flame retardant containing phosphorous(P), there is a need to check if calcium components including Oyster Shell White were used in Dancheong in advance and to conduct various preliminary studies on place conditions and Dancheong construction conditions.