• Journal of the Mineralogical Society of Korea
• /
• v.21 no.4
• /
• pp.349-354
• /
• 2008

Semiquantitative mineralogical analysis of clays in soils was performed to understand the distribution of clay minerals in relation to bedrock lithology on the northern basin of the Nakdong River. The soils developed on the granitic bedrocks have high contents of kaolinite and smectite. mite was the major clay mineral in the soils from sedimentary bedrocks, with minor kaolinite, smectite, and intergrade (interstratified chlorite-smectite or hydroxy-interlayed vermiculite) clay minerals. Illite and kaolinite contents of the soils from metamorphic and volcanic bedrocks fall between those of the soils from the granitic bedrocks and those of the soils from the sedimentary bedrocks. The clay mineralogy of the soils depends on the compositions of bedrock minerals and their susceptibility to chemical weathering. The weathering of plagioclase resulted in the high kaolinite content of the soils derived from granitic bedrocks, while the soils derived from sedimentary bedrocks are abundant in residual illite.

• Proceedings of the Mineralogical Society of Korea Conference
• /
• 2003.05a
• /
• pp.10-10
• /
• 2003

일라이트-스멕타이트 혼합층광물(I-S)은 열역학적으로 상호 대립적인 두 가지 모델로 이해되고 있다. 첫째, MacEwan 결정자 모델은 I-S를 5-20개의 스멕타이트와 일라이트 층으로 구성된 결정자로 해석한다. 이러한 모델은 분산과 재응집 과정을 기초로 하는 X-선 회절분석(XRD)에서 기인한 것으로 Reynolds의 XRD 모델과 동일하다. 둘째, 기본입자 모델은 I-S를 물리적으로 분리될 수 있는 최소 입자인 기본입자가 $c^{*-}$축 방향으로 응집된 응집체로 해석한다. 이러한 모델은 분산 과정을 기초로 하는 주사전자현미경(TEM) 관찰에서 기인한 모델이다. 강일모 등(2002)은 이 두 가지 모델을 비교함으로써 1< $N_{F}$<100/% $S_{XRD}$ ( $N_{F}$=평균 기본입자 층개수, %$S_{XRD}$=XRD 분석을 통하여 측정된 팽창성)을 도출하였다. 이 식은 기본입자모델과 Eberl & Srodon(1988)이 제시한 최대 팽창성(%$S_{MAX}$)을 동시에 해석할 수 있게 해준다. %$S_{MAX}$는 XRD 모델에서는 고려하지 않는 I-S 결정자 상$\cdot$하부에 존재하는 두 개의 0.5nm 규산염층을 하나의 스멕타이트 층으로 간주하여 얻어진 팽창성이다. Srodon et al.(1992)은 %$S_{MAX}$=100/ $N_{F}$을 제시하였으며, 강일모 등(2002)은 %$S_{MAX}$는 기하학적으로 기본입자가 무한적층을 하였을 때 관찰되는 %$S_{XRD}$와 동일함을 밝힌 바 있다. 만약, XRD 분석을 위한 시료 준비과정에서 I-S 결정자가 분산되었다가 재응집을 한다면, XRD에서 관찰되는 결과는 일차적으로 기본입자의 적층성에 영향을 받게 된다. 따라서, 기본 입자의 적층성은 XRD 분석을 이용하여 I-S 구조를 해석하는데 매우 중요한 요인이다. 본 연구는 기본입자의 적층성을 정량화하기 위해 %$S_{XRD}$=A/ $N_{F}$ (0$S_{MAX}$=100/ $N_{F}$로부터 얼마나 벗어나 있는가는 지시해 준다 금성산화산암복합체에서 산출되는 11개 I-S 시료와 14개의 Drits et al.(1998) 자료로부터 1nA=-0.14 $N_{F}$+4.7의 실험식을 도출할 수 있었으며, 기본입자의 적층성은 일차적으로 기본입자의 두께에 의해 영향을 받는 것으로 관찰되었다. Nadeau(1985)는 기본입자두께분포로부터 I-S 결정자의 팽창성을 측정하기 위하여 Ps=$\Sigma$p(N)/N을 제시하였다(Ps=스멕타이트 층 비율, N=기본 입자 층개수, p(N)=N의 확율). 그러나 위식은 실질적으로 %$S_{MAX}$를 제공해주기 때문에 %$S_{XRD}$를 유추하는데는 부적합하다. 본 연구는 이를 변형하여 Ps=$\Sigma$p(N)A(N)/N을 제시하였다(A(N)=N에 대한 A값). 위의 실험식을 사용하여 헝가리산 Zempleni 시료(15%$S_{XRD}$)의 기본입자분포로부터 %$S_{XRD}$를 계산한 결과, 16%$S_{XRD}$의 결과값을 얻을 수 있었다. 따라서, 본 연구에서 도출한 관계식들이 유효함을 확인할 수 있었다.계식들이 유효함을 확인할 수 있었다.

• Journal of the Mineralogical Society of Korea
• /
• v.15 no.2
• /
• pp.95-103
• /
• 2002

The object of this study was to interpret the ralationship between expandability (% $S_{XRD}$), MacEwan crystallite thickness ( $N_{CSD}$), and mean fundamental particle thickness ( $N_{F}$ ) in illite-semctite mixed layer (I-S), quantitatively. This interpretation was extracted from comparison of two structural models (MacEwan crystallite model and fundamental particle model) of I-S mixed layers. In I-S structure, % $S_{XRD}$, $N_{CSD}$, and $N_{F}$ are not independent parameters but are related to each others by particular geometric relations. % $S_{XRD}$ is dependent on $N_{CSD}$ by short-stack effect, whereas, % $S_{XRD}$ and $N_{F}$ have relation to smectite interlayer number (Ns)=( $N_{F-}$1)/(100%/% $S_{XRD-}$ $N_{F}$ . Therefore, % $S_{XRD}$ and $N_{F}$ should satisfy a specific physical condition, 1< $N_{F}$ <100%/% $S_{XRD}$, because $N_{s}$ is positive. Based on this condition, this study suggested % $S_{XRD}$ vs $N_{F}$ diagram which can be used to interpret % $S_{XRD}$, $N_{F}$ , $N_{S}$ , and ordering, quantitatively. The diagram was examined by XRD data for I-S samples from Ceumseongsan volcanic complex, Korea. I-S samples showed that $N_{F}$ departs from the physical upper-limit ( $N_{F}$ =100%/% $S_{XRD}$) with decrease in % $S_{XRD}$. This phenomenon may happen due to decrease of stacking-capability of fundamental particles with their thickening.g.s with their thickening.g.

• Economic and Environmental Geology
• /
• v.45 no.2
• /
• pp.71-78
• /
• 2012

Illite-smectite mixed layers (I-S) occurring authigenically in diagenetic and hydrothermal environments reacts toward more illite-rich phases as temperature and potassium ion concentration increase. For that reason, I-S is often used as geothermometry and/or geochronometry at the field of hydrocarbons or ore minerals exploration. Generally, I-S shows X-ray powder diffraction (XRD) patterns of ultra-thin lamellar structures, which consist of restricted numbers of sillicate layers (normally, 5 ~ 15 layers) stacked in parallel to a-b planes. This ultra-thinness is known to decrease I-S expandability (%S) rather than theoretically expected one (short-stacking effect). We attempt here to quantify the short stacking effect of I-S using the difference of two types of expandability: one type is a maximum expandability ($%S_{Max}$) of infinite stacks of fundamental particles (physically inseparable smallest units), and the other type is an expandability of finite particle stacks normally measured using X-ray powder diffraction (XRD) ($%S_{XRD}$). Eleven I-S samples from the Geumseongsan volcanic complex, Uiseong, Gyeongbuk, have been analyzed for measuring $%S_{XRD}$ and average coherent scattering thickness (CST) after size separation under 1 ${\mu}m$. Average fundamental particle thickness ($N_f$) and $%S_{Max}$ have been determined from $%S_{XRD}$ and CST using inter-parameter relationships of I-S layer structures. The discrepancy between $%S_{Max}$ and $%S_{XRD}$ (${\Delta}%S$) suggests that the maximum short-stacking effect happens approximately at 20 $%S_{XRD}$, of which point represents I-S layer structures consisting of ca. average 3-layered fundamental particles ($N_f{\approx}3$). As a result of inferring the $%S_{XRD}$ range of each Reichweite using the $%S_{XRD}$ vs. $N_f$ diagram of Kang et al. (2002), we can confirms that the fundamental particle thickness is a determinant factor for I-S Reichweite, and also that the short-stacking effect shifts the $%S_{XRD}$ range of each Reichweite toward smaller $%S_{XRD}$ values than those that can be theoretically prospected using junction probability.

• Korean Journal of Mineralogy and Petrology
• /
• v.35 no.4
• /
• pp.397-407
• /
• 2022

Mineralogical analysis of the bedrock of the Gobi Desert in southern Mongolia, the source of Asian dust, was conducted to trace the geological origin of the constituent minerals of Asian dust. The bedrock of the source of Asian dust consists of Paleozoic volcanics and volcaniclastic sedimentary rocks, Paleozoic granitic rocks, and Mesozoic sedimentary rocks. Paleozoic volcanics and volcaniclastic sediments lithified compactly, underwent greenschist metamorphism, and deformed to form mountain ranges. Mesozoic sedimentary rocks fill the basin between the mountain ranges of Paleozoic strata. In comparison to Paleozoic volcanic and sedimentary rocks, Mesozoic sedimentary rocks have lower contents of chlorite and plagioclase, but high contents of clay minerals including interstratified illite-smectite, smectite, and kaolinite. Paleozoic granites characteristically contain amphibole and biotite. Compared with the mineral composition of bedrock in source, Asian dust is a mixture of detrital particles originating from Paleozoic and Mesozoic bedrocks. However, the mineral composition of Mesozoic sedimentary rocks is closer to that of Asian dust. Less lithified Mesozoic sedimentary rocks easily disintegrated to form silty soils which are deflated to form Asian dust.

• Economic and Environmental Geology
• /
• v.36 no.1
• /
• pp.1-8
• /
• 2003

This study was performed to measure expandabilities and coherent scattering domain sizes (CSDs) of bentonite samples from Campo and Yonil area, Korea, using X-ray powder diffraction (XRD), and to compare their experimental data with those of international standard bentonite samples (SAz-1, STx-1, and SWy-2). Most of Gampo and Yonil bentonite samples comprised randomly interstratified illite-smectite (R0 I-S), and their expandabilities ranged over 77-100%S$_{XRD}$ from the saddle/001 method. The interstratification deformed 001 peaks of EG-solvated samples (Mering's first principle), which prohibited us from adopting these peaks to measure CSDs using BWA (Bertaut-Warren-Averbach) method. CSDs of the bentonite samples with R0 I-S could be measured through dehydration at 30$0^{\circ}C$ after K-saturation, where the deformation originated from the interstratification could be removed effectively. Campo and Yonil bentonite samples showed that their mean CSDs ranged over 3.8-5.4 interlayers, and that their CSDs distributions were similar to those of Gonzales (STx-1) and Wyoming (SWy-2) bentonite samples.

• Korean Journal of Mineralogy and Petrology
• /
• v.33 no.3
• /
• pp.153-163
• /
• 2020

Mineral and geochemical analysis were conducted on two sections (~3.5 m) of red-brown claysilt sediments covering the gneiss and granite weathering zones in Suwon-si for establishing Quaternary paleoenvironmental changes in Korea. The sections were divided into four sedimentary layers (Unit 1-4) by vertical changes in mineral composition and chemical composition. The lowermost unit 1 was a sandy sediment with a high K-feldspar content with a significant contribution of weathered bedrock. Unit 2 was a transition layer showing intermediate characteristics. Unit 3 was a reddish brown clay-silt sediment, with a total clay content of 58% on average, and the main clay minerals were illite-smectite mixed layer minerals and hydroxy-interlayered vermiculite/smectite. Unit 3 contained almost no plagioclase, while the content of kaolin minerals derived by the plagioclase weathering was higher than in the other layers. Unit 4 had similar mineral composition and chemical properties to Unit 3, but had a higher content of plagioclase and chlorite and lower content of kaolin minerals. The chemical compositions of the sections were compared with those in other regions of Korea, suggesting the eolian origin of Units 3 and 4. The paleoenvironmental change in the sedimentary section of this region was interpreted as follows. Weathered products of gneiss and granite, which are bedrocks of this region, were eroded and deposited as sandy sediments in the periphery to form the lower layers (Unit 1, 2), followed by the deposition of the claysilty rich eolian sediments (Unit 3) during the glacial. Unit 3 was chemically weathered during the warm humid climate during the last interglacial, developing a reddish brown color. After that, a eolian sediment layer (Unit 4) was deposited during the last glacial.

• Journal of the Mineralogical Society of Korea
• /
• v.4 no.1
• /
• pp.1-10
• /
• 1991

Tosudite from the Sungsan mine, Korea is an alteration product of rhyolitic tuff in the cretaceous Hwangsan Formation. It is associated with illite, dickite, nacrite or quartz and also found in the cavities of black claystone. X-ray diffraction and chemical analyses show that the Sungsan tosudite is a lithium-bearing aluminous 1:1 regularly interstratified mineral of di, dioctahedral chlorite and smectite. Its structural formula is $(K_{0.73}Na_{0.02}Ca_{0.07})(Si1_{13.23}Al_{2.77})(Li_{0.52}Mg_{0.08}Mn_{0.01)Fe^{3+}_{0.07}Al_{12.33})O_{40}(OH)_{20}$ and it suggests that Sungsan tosudite consists of regularly interstratified Li-donbassite and beidellite. DTA and TG curves as well as IR absorption data also support such a result. Temperature of formation of tosudite is inferred to be between $110{\circ}$ and $270{\circ}C$.

• Journal of the Mineralogical Society of Korea
• /
• v.29 no.2
• /
• pp.79-87
• /
• 2016

Asian dust (Hwangsa) interacts with light, atmospheric gas, aerosol, and marine ecosystem, affecting Earth climate. Mineralogical properties are essential to understand the interaction between the dust and environments. In this study, we examined the mineralogical properties of Asian dust collected at Deokjeok Island, Incheon, Korea in February 22, 2015. X-ray diffraction (XRD) analyses showed that phyllosilicate minerals (62 wt%) dominate the Asian dust. Illite-smectite series clay minerals (55%) were common with minor chlorite (5%) and kaolinite (2%). Non-phyllosilicate minerals were quartz (18%), plagioclase (10%), K-feldspar (4%), calcite (4%), and gypsum (1%). Similar results were obtained by mineral quantification using scanning electron microscopy (SEM) and energy dispersive X-ray spectrometry (EDS). Transmission electron microscopy combined with EDS confirmed illite-smectite series clay minerals as the dominant phyllosilicate type. Morphological analyses using SEM showed clay agglomerates, clay-coated quartz, feldspars, and micas. Gypsum grains were common on the particle surface, while calcite nanofibers, previously reported as common on the surface, were rare, indicating the reaction of calcite and acidic atmospheric pollutants to form gypsum. The analytical result of 2015 Asian dust would contribute to the establishment of mineralogical base for the modeling of the interaction between Asian dust and environments.

• Journal of the Mineralogical Society of Korea
• /
• v.30 no.1
• /
• pp.11-19
• /
• 2017

Reddish brown clay-silt sediments covered granitoid weathering crust in the Jangdongri area, Naju, Korea. Mineralogical and geochemical properties of the ~2 m sediment section were investigated. The sediments were composed mainly of quartz (50%) and clay minerals (45%) with minor contents of K-feldspar, goethite, hematite, and gibbsite. The clay minerals were illite, illite-smectite mixed-layers, vermiculite, hydroxy-Al vermiculite, kaolinite, and halloysite. Mineral composition varied little through the section with the minor upward enrichment of plagioclase and chlorite. Abundant illitic clay minerals indicated the remote source of the sediments because clays derived by granite weathering in Korea were dominated by kaolin minerals. A comparison with the mineral composition of Asian dust (Hwangsa) suggested that plagioclase and K-feldspar disappeared by chemical weathering after deposition, resulting in the quartz and clay-rich sediments. Plagioclase and chlorite altered to kaolin and vermiculite, respectively. Goethite and hematite derived by the weathering of iron-bearing minerals stained the sediment to reddish brown color. The mineralogical and geochemical properties of the reddish brown clay-silt sediments were consistent with those of eolian deposits identified in Korea, supporting eolian origin of the Jangdongri sediments, requiring future confirmation including age dating and isotopic analysis.