• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2013.10a
• /
• pp.174-175
• /
• 2013

• Journal of the Korean Society of Industry Convergence
• /
• v.6 no.3
• /
• pp.261-266
• /
• 2003

이 논문에서는 반능동 진동 흡수기를 통합 시트/섀시 현가 장치에 확대, 적용하여 그 성능을 조사하였다. 통함 현가시스템의 성능분석을 위해 집중 인체질량과 함께 실험적으로 입증된 한 비선형 시트 쿠션 모델을 도입하였다. 또한 3 자유도 시트/섀시 현가시스템의 효과적인 진동제어를 위해 리아푸노브 바이스테이트 제어법칙을 사용하였다. 시뮬레이션결과 반능동 통합 현가장치는 시트 쿠션 모델과 관계없이 운전자의 승차감과 관련 있는 시트의 절대가속도 크기와 시트쿠션의 시트 트랙에 대한 상대변위를 상당히 감소시킬 수 있음을 알 수 있었다. 그러나, 주로 사용되어온 선형 쿠션 모델을 사용한 경우보다 비선형쿠션 모델을 사용한 경우의 제진성능이 약간 저조함을 알 수 있었다. 따라서, 자동차 시트 설계시 성능분석을 위해서는 실제의(비선형의) 시트 쿠션 특성을 적용해야 함을 알 수 있다.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.10 no.2
• /
• pp.193-200
• /
• 2002

Simple spring-damper-mass models have been widely used to investigate whole-body vortical biodynamic response characteristics of the seated vehicle driver. Most previous models have not considered the effect of wobbling masses; i.e. heart, lungs, liver, intestine, etc. In this study, 4 -DOF seated driver model including one non-rigid mass representing wobbling visceral mass, 5-DOF model including intestine, and 10-DOF model including five lumbar vertebral masses were proposed. The model parameters were identified by a combinatorial optimization technique. simulated annealing method. The objective function was chosen as the sum of error between model response of seat-to-head transmissibility and driving point mechanical impedance and those of experimental data for subjects seated erect without backrest support. The model response showed a good agreement with the experimental response characteristics. Using a 10-DOF model, calculated resonance frequency of lumbar spine at 4Hz was matched well with experimental results of Panjabi et al.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2004.11a
• /
• pp.369-374
• /
• 2004

This study aims to measure an apparent mass of a seated human body at the sitting posture in a passenger car in the frequency range from 1 to 20 Hz and to investigate the dynamic characteristics. Thirty subjects joined the test where eight levels of acceleration from $0.1m/s^2\;to\;2.0m/s^2$ were used to excite seated human body. Most of apparent mass curves showed two peaks in the frequency range of $4\sim9Hz$, first peak was clearer at the contact point of the seat and the hip, and the second one at the contact point of the backrest and the back. Both peak frequencies were found to move down to lower frequencies with increase of acceleration magnitude. Shapes of apparent mass curves were clearly different from those at erect posture especially in the frequency range around and above the second peak.

• Journal of Biosystems Engineering
• /
• v.9 no.1
• /
• pp.1-4
• /
• 1984

노외차량(路外車輛)의 승차(乘車) 시뮬레이션을 위한 착석(着席) 상태(狀態)의 운전자(運轉者) 모델을 개발(開發)하였다. 운전자(運轉者) 모델은 머리, 몸체, 신부(腎部)로 크게 나누어 자유도(自由度) 3의 진동체로 가정(假定)하고 머리와 몸체, 몸체와 신부(腎部)는 각각 목과 장기(臟器)를 나타내는 탄성체로서 연결하였다. 또한 인체의 해부학적(解部學的) 구조(構造)와 일치(一致)하도록 머리와 신부(腎部)사이에는 척추(脊椎) 부분(部分)을 포함시켰다. 모델의 각 변수(變數)들은 기존(旣存)의 실험(實驗) 결과(結果)를 이용(利用)하여 머리부의 진동(振動)이 실험(實驗) 결과(結果)와 일치(一致)하도록 시뮬레이션 방법(方法)으로 결정(決定)하였다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.6
• /
• pp.3435-3441
• /
• 2014

A dynamic modeling and prediction of polyurethane foam material, which is used as the seat in vehicles is very important for improving the ride quality of vehicle occupants. In this study, parameters to define the nonlinear stiffness and time-variant characteristics of the viscoelasticity of polyurethane foam were obtained using a static compression test. Polynomial functions and convolution integral were used to model the nonlinear and viscoelastic characteristics of polyurethane foam mathematically. The dynamic behaviors excited by the seat floor displacement were analyzed using a numerical integration method for the nonlinear vibration model. As a result, the viscoelastic characteristics of polyurethane foam was found to be an important parameter for improving the ride quality.

• Explosives and Blasting
• /
• v.30 no.2
• /
• pp.86-97
• /
• 2012

Ground vibration induced by a bench blasting in the construction site should cause the damage to the structure and indirect damage to a human body, and the vibration level is most practical descriptor for regulating the damage to human body and peak particle velocity is the descriptor for direct damage assesment of the structure. Meantime, the vibration level has not been considered for the blasting design but this study is the case that apply not only peak particle velocity but also vibration level on the blasting design. Also, we strongly believe that this study will be helpful for the management in the blasting site which some civil appeal is concerned. Total 232 measurements of both ppv and vibration level was used to estimate the scale distance. When the regulating threshold was ppv 0.3 cm/s and vibration level 75 decibel, the charge per delay to be estimated with vibration level could be recommended by 1.2~1.4 times than it of ppv. So, it is proven that considering vibration level on the blasting design is reasonable for not only prevention of the civil appeals but also effective blasting. Again, the blasting design which follows the law, "Noise and Vibration Control Act" can actually serve good condition to carry much more economical and effective blasting. The instruments used for this study are the SV-1 model, as first instrument in korea which can measure vibration velocity and vibration level at the same time.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2013.04a
• /
• pp.516-517
• /
• 2013

Whole body vibration is very important for operators in construction equipment (CE) industry. There is ISO 2631 regulation to protect operators of CE. Recently WBV is one of critical performance parameters of CE to give operators much better comfortable working environment. And there are many kinds of numerically simplified human body model for the motor industry. We applied one human body model in ISO 5982 for the CE development at early stage. And we've checked the validity of this model to consider WBV by the operator comfort point of view.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.34 no.7
• /
• pp.943-946
• /
• 2010

In this study, a front suspension system, which is mounted on the handle itself, was suggested because of its light weight and cost efficiency. The shock absorption was evaluated for the three types of suspension models; non-suspension, suspension on front forks (existing model), and suspension on handle (suggested model). The human body model was used for performing impact simulation for comparing the shock absorption for the suspension models. The result of the simulation shows that shock absorption for the proposed suspension model was not as good as that for the front fork suspension model. Nevertheless, the shock absorption observed for the proposed suspension model was significant when compared to the non-suspension model. Consequently, the proposed suspension model could be applied to lightweight bicycles.

• Proceedings of the KAIS Fall Conference
• /
• 2005.05a
• /
• pp.111-114
• /
• 2005

현재 휴대폰은 대중화되고 있으며, 로봇기술 또한 각광 받고 있다. 그래서 우리는 로봇기술과 휴대폰 기술을 접목한 RCP(Robotic Cellular Phone)를 구현하려 한다. RCP를 구성하기 위해서 휴대폰의 움직임을 구현, 외부환경 및 RCP 자신의 상태인식 기능 그리고 사용자의 감성을 유발할 수 있는 감성유발엔진 및 감성평가모델의 군축이 필요하다. 본 연구에서는 감성평가모델의 개발을 위하여 음악과 진동 자극을 주어 생체신호 HRV와 GSR을 측정하여 정량적인 데이터를 수집, 특정감성을 평가하였다. 감성을 평가함에 있어서 개인의 차이가 발생하기 때문에 개개인의 표준화 (Normalize)가 필요하게 되었다. 표준화를 위하여 IAPS영상을 활용한 결과 우리가 얻고자 하는 감성의 변화에 대한 판단을 할 수 있음으로 감성의 신호 모델을 유추할 수 있었다.