• Journal of the Korean Geosynthetics Society
• /
• v.16 no.2
• /
• pp.55-66
• /
• 2017

The standard piezocone penetration rate of 2 cm/s is proposed in specifications regardless of soil type. However, conditions of standard Piezo Cone Penetration (CPTU) Testings in silty soils with low plasticity vary from undrained to partially drained or fully drained penetration conditions. The partially drained shear strengths of Incheon, Hwaseong and Gunsan silty soils were estimated from the analysis results of the distributions of CPTU-based shear strengths. The CPTU-based shear strengths were compared between the undrained shear strength line and the fully drained shear strength line, which were determined from approximately ${\varphi}^{\prime}=3^{\circ}$ and ${\varphi}^{\prime}=15^{\circ}$, respectively. The internal friction angles obtained from the back analysis and UU-tests tended to increase with decreasing plasticity index, which range approximately from ${\varphi}^{\prime}=2^{\circ}$ to ${\varphi}^{\prime}=14^{\circ}$. The results matchs well with CPTU-based estimation results.

• The Journal of the Korea Contents Association
• /
• v.19 no.1
• /
• pp.37-46
• /
• 2019

The purpose of this study is to develop a flipped-learning based education model for vocational education and training. Based on previous studies, we have developed a training model that includes definitions of flipped-learning, major learning activities, and operational strategies in each occupation. In addition, delphi surveys were carried out to confirm the validity of the educational model for HRD and vocational education and training specialists. Finally, the flipped-learning model for vocational education and training consists of three stages: Pre-learning, Main-learning, and Post-learning. Pre-learning stage include Online lectures, Simple tasks, Main-learning stage include Active learning and Coaching-Debriefing lecture, Post-learning stage includes Individual reflection-Additional task performance activities. The educational model developed through this study was developed with the focus on improving the linkage and the performance of the goal of vocational education and training.

• Journal of Urban Science
• /
• v.11 no.2
• /
• pp.25-30
• /
• 2022

Resin Transfer Molding FRP (RTM FRP) is a fiber reinforced polymeric plastic which is manufactured by applying pressure to fibers, injecting resin into a mold, and then impregnating it. RTM FRP is a new construction material suitable for producing non-continuum structural elements such as sole plate because it has excellent strength and can produce many members in a short time. In this study, experiments were conducted to estimate the capacity of the bolted connection of RTM FRP. First, a tensile test was conducted to confirm the mechanical properties such as the tensile strength of the RTM FRP to be used for the bolted connection experiments. In addition, experiments were conducted on the bolted connection with the thickness of the RTM FRP and the edge distance of the bolt as variables. In the first experiment, F4.8 bolts were used, and shear failure of the bolt occurred before the RTM FRPs were failed. The F4.8 bolt is a general structural bolts used for the sole plate of a bridge bearing, and it was confirmed that the RTM FRP has a higher bold bearing strength than the shear strength of a F4.8 bolt. In the second experiment, G12.9 bolts were used, and shear failure of the bolt and bearing failure of the RTM FRP occurred simultaneously. In addition, as the thickness of the RTM FRP and the edge length of the bolt increased, the strength of the joint increased. When analogized with the bearing fracture equation of steel plate, the bolted connection of RTM FRP showed a bearing strength coefficient of 0.420 to 0.549 compared to the tensile strength, and it is considered that further research is needed.

• Journal of Fisheries and Marine Sciences Education
• /
• v.26 no.2
• /
• pp.392-400
• /
• 2014

2012년 통계청 자료에 의하면 한국에 체류하는 외국인은 약 160만명이고, 그 중 방글라데시 노동자는 약 4.7%(한국고용정보원, EPS, 2012)라고 한다. 본 논문의 연구를 위하여 김해(100명), 마산(60명), 인천(40명)에 거주하고 있는 방글라데시 이주 노동자 약 200명에 대하여 설문조사를 실시하였다. 이 연구의 목적은 그들의 직업만족도와 삶의 만족도 사이에는 어떤 관련성이 있는지, 그들의 한국에서의 삶의 만족도를 높이기 위한 방안은 무엇인지에 대하여 알아보고자 하는 것이다. 연구 결과 직업 만족도의 ${\alpha}$ 값은 0.71, 삶의 만족도에 대한 ${\alpha}$ 값은 0.72 이었다. 직업만족도에 대한 설문은 Paul E. Spector(1985)가 고안한 것을 사용하였으며, 삶의 만족도에 대한 설문은 Thomas M. Krapu외 4인이 연구한 것을 사용하였다. 연구 결과 방글라데시 이주 노동자의 직업만족도와 삶의 만족도 사이에는 강한 관련성이 있으며, 그들이 느끼는 삶의 만족도는 매우 낮았다. 이를 높이기 위해서는 정부와 시민단체들의 적극적인 지원이 필요하다고 분석되었다.

• Journal of Acupuncture Research
• /
• v.29 no.5
• /
• pp.159-166
• /
• 2012

목표 : 본 연구는 인천 지역에 사는 24~60개월 영유아를 가진 부모들의 보완대체요법에 대한 인식을 조사한 연구로, 보완대체요법 활용을 통한 한방과의 연계에 대한 가능성을 타진하기 위해 연구되었다. 방법 : 박지현(2007)이 사용한 질문지를 본 연구에 맞게 수정 보완하여 사용하였다. 수집한 자료는 SPSS 12를 사용하여 분석하였다. 결과 : 1) 영유아를 둔 한국의 모든 어머니는 자녀의 건강에 관심이 많았으며, 올바른 생활 습관을 갖게 하는 것이 가장 중요하다고 생각하였다. 2) 실제 80% 정도의 부모가 자녀에게 보완대체요법을 제공하였으며, 주로 예방차원에서 제공하기 때문에 질병이 발생하기 전에 사용을 하였다. 3) 보완대체요법은 질병이 발생했을 때 사용을 하지만, 보완대체요법의 사용은 주로 병원치료와 병행하는 경우가 많았다. 4) 직접 보완대체요법을 사용한 부모들의 80% 정도는 긍정적인 반응을 보였고, 이들 중 81% 정도는 다시 사용을 하겠다는 반응을 보였다. 결론 : 영유아 부모들은 건강 증진을 위한 보완대체의학에 대해 긍정적으로 인식하고 있었다. 이러한 결과는 한의학 영역에서 영유아 부모들에게 자녀의 건강을 효과적으로 증진시킬 수 있는 전문적인 의료지식뿐만 아니라 이들이 한의학에 접근할 수 있는 다양한 방법을 고안할 필요성을 제시하고 있다.

• Journal of the Korean Home Economics Association
• /
• v.35 no.2
• /
• pp.217-234
• /
• 1997

This study attempts to analyze some determinants of consumers' medical service quality and their complaining behavior. The results can be summerized as follows: 1. The determinants of consumers' perceived medical service quality could be categorized as five factors; i.e. nursery, hospital environment, medical doctors, other staffs service fee. Among them nursery sector consists of 32% variance. 2. According to the discriminant analysis, those determinants are of great value to distinguish between satisfied/unsatisfied group. The hit ratio was 85.4% which is relatively high score. 3. The type of complaining behavior could be grouped into no action, private and public complaining behavior. Most of respondents belonged to no action group and a few showed private complaining behavior. Any respondents who were willing to show public complaining behavior could not be found out. 4. These variables which influence complaining behavior were preconception toward hospital, barrier to complaining process and expected complaining behavior. Among them the first one was most influential variable. 5. In order to distinguish between complaining/non complaining behavior group, discriminant analysis was done. The result showed the above three variables had a significantly discriminatory power, the hit ratio reaching above 70%. In summary, we can see that consumers' evaluation on the whole medical service depends on the external factor such as staffs' attitude or hospital facilities due to the lack of their ability to evaluate highly specialized service like doctor's treatment.

• Explosives and Blasting
• /
• v.22 no.2
• /
• pp.21-32
• /
• 2004

산업용 화약은 19세기 중엽부터 외국인에 의해서 수입된 화약류를 채광목적에 이용하기 시작한 것으로 전해 오고 있으나, 본격적으로 현대화약이 사용된 시기는 1930년대부터 국내 지하자원을 개발하면서라 할 수 있다. 1935년에는 홍남에 대규모 화학단지를 조성하였고 1940년에는 인천에 독립적인 화약공장이 세워져 국내 화약류가 본격적으로 생산되게 되었다. 그러나 1940년부터 보관된 자료는 없고 일부 존재하기는 한데 대부분 신빙성이 없는 자료들뿐이다. 화약류는 세계적으로 대부분 광업분야에 주로 이용되었다. 하지만 국내건설산업이 크게 발달하면서부터 광업분야보다 건설분야에 많이 이용되어지고 있다. 건설분야 중에서도 특히 건축, 토목, 시멘트, 골재생산에 폭약사용이 증가되어 왔다고 생각되어지나 화약류 생산에 대한 1990년 이전 자료들이 거의 없거나 불명확한 자료들이었다. 본 연구에서는 폭약에 따라 차이가 발생하는 폭열을 기준으로 비교될 건설기성액에 대하여 폭약총생산량의 폭약을 폭약등가톤수(Tons of explosives equivalent; TOEE)로 적용하여 1990년부터 최근 11년 간 화약생산량을 근거하여 2000년까지 건설경기동향과 폭약생산량의 상관관계 추이를 밝혀 국내 건설산업과 폭약생산량 증감의 경향을 연구하고자 하는데 그 목적이 있다.

• Journal of the Korean GEO-environmental Society
• /
• v.6 no.3
• /
• pp.5-15
• /
• 2005

A large diameter sampler that can take undisturbed samples from soft ground was developed by KICT. In order to compare the quality of samples taken by the sampler with those of the traditional piston sampler, a series of laboratory tests were performed. Samples were taken at different sites such as Incheon, Gimhae, Yangsan and Busan. The results showed that the values of unconfined compression strength, secant modulus, pre-consolidation pressure, undrained shear strength, and shear modulus exhibited higher in samples taken by the large scale sampler. Strains at shear failure and volumetric strains were low for the new sampler. It was proved from the comparison that better quality samples could be obtained by the KICT sampler.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.12 no.10
• /
• pp.1883-1889
• /
• 2008

In order to realize future ubiquitous, it needs to establish an environment witch service is provided to an user without user's awareness. This study suggests the mobile context awareness algorithm for that. With DB collected using LBS technology, it aims to recognize service status of a terminal and to maximize user's convenience by offering service through continuous inter-operability for various demand and environment of users against the status of a terminal. To realize the algorithm, it adds a terminal status deduction process to MSC. And then, it suggests the algorithm witch determines terminal status depending on status parameter defined by analyzing LBS-based short information by MSC. It realize C code.

• Journal of Korean Association for Spatial Structures
• /
• v.18 no.4
• /
• pp.61-68
• /
• 2018

Tensile load tests were conducted on High-Shear Ring Anchors (HRAs) after shear load had been applied to the HRAs, which had been developed to reduce the number of the anchors. Test variables include the embedment length of the rod and the width of the specimens and a total of 12 specimens were tested. Test results show that the HRAs pulled out due to bond failure or steel failure occurred in case that the HRAs were installed to the members with 300mm or greater width and the embedment length of 160mm (the actual embedment of rod is 140mm) or deeper. Except 4 HRAs showing steel failure of rod, the minimum and average of test-to-prediction by ACI 318-14 ratios are 1.18 and 1.79, respectively. The tensile strength of HRAs, after shear load was applied to the HRAs, can be safely evaluated by the minimum among the concrete breakout strength and bond strength with the actual embedment length of the rod.