• Journal of KIISE:Software and Applications
• /
• v.31 no.5
• /
• pp.617-624
• /
• 2004

This paper describes a new facial feature localization method that uses Adjacent Depth Differences(ADD) in 3D facial surface. In general, human recognize the extent of deepness or shallowness of region relatively, in depth, by comparing the neighboring depth information among regions of an object. The larger the depth difference between regions shows, the easier one can recognize each region. Using this principal, facial feature extraction will be easier, more reliable and speedy. 3D range images are used as input images. And ADD are obtained by differencing two range values, which are separated at a distance coordinate, both in horizontal and vertical directions. ADD and input image are analyzed to extract facial features, then localized a nose region, which is the most prominent feature in 3D facial surface, effectively and accurately.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.125-125
• /
• 2011

Silicon-oxide-silicon nitride-oxide silicon (SONOS) 구조를 가진 플래쉬 메모리 소자는 기존의 floating gate (FG)를 이용한 플래쉬 메모리 소자에 비해 구동 전압이 낮고, 공정 과정이 간단할 뿐만 아니라 비례 축소가 용이하다는 장점 때문에 차세대 플래쉬 메모리 소자로 많은 연구가 진행되고 있다. SONOS 구조를 가진 플래쉬 메모리에서 소자의 셀 사이즈가 감소함에 따라 발생하는 인접한 셀 간의 간섭 현상에 대한 연구가 소자의 성능 향상에 필요하다. 본 연구에서는 SONOS 구조를 가진 플래쉬 메모리에서 소자의 셀 사이즈가 작아짐에 따라 발생하는 인접한 셀 간의 간섭 현상에 대해 recess field 의 깊이에 따른 변화를 조사하였다. 게이트의 길이가 30nm 이하인 SONOS 구조를 가진 플래쉬 메모리 소자의 구조에서 recess field의 깊이의 변화에 따른 소자의 전기적 특성을 삼차원 시뮬레이션 툴인 sentaurus를 사용하여 계산하였다. 커플링 효과를 확인하기 위해 선택한 셀의 문턱전압이 주변 셀들의 프로그램 상태에 미치는 영향을 관찰하였다. 본 연구에서는 SONOS 구조를 가진 플래쉬 메모리에서 셀 사이에 recess field 를 삽입함으로 인접 셀 간 발생하는 간섭현상의 크기를 줄일 수 있음을 시뮬레이션 결과를 통하여 확인하였다. 시뮬레이션 결과는 recess field 깊이가 증가함에 따라 인접 셀 간 발생하는 간섭현상의 크기가 감소한 반면에 subthreshold leakage current가 같이 증가함을 보여주었다. SONOS 구조를 가진 플래쉬 메모리 소자의 성능향상을 위하여 recess field의 깊이를 최적화 할 필요가 있다.

• Smart Media Journal
• /
• v.2 no.2
• /
• pp.28-32
• /
• 2013

In this paper, we present a method to reduce complexity of depth modeling modes (DMM) that are used in the current 3D-HEVC standardization. DMM adds four modes to the existing HEVC intra prediction modes for accurate object edge representation in the depth map. Especially, Mode 3 requires distortion calculation of numerous pre-defined wedgelets, inducing high complexity. The proposed method employs absolute differences of neighboring pixels in the sides of the reference block to find high intensity changing positions. Based on such positions, the number of wedgelet candidates is reduced to six and distortion calculation is skipped for irrelevant wedgelets. Experimental results show complexity reduction by 3.1% on average, while maintaining similar coding performance.

• Proceedings of the Korea Multimedia Society Conference
• /
• 2002.05c
• /
• pp.371-376
• /
• 2002

본 논문은 영역 분할에 기반한 스테레오 정합에 있어서, 분할영역 내부에 존재하는 단계적인 변위의 변화를 추정할 수 있는 스테레오 정합 알고리즘에 관한 것이다. 우선, 분할영역을 효과적으로 표현할 수 있는 복수의 샘플점들을 선정한 다음에 각 샘플점 주위에 인접한 영역 내부의 미소영역을 취하여 스테레오 정함을 수행한다. 이후, 획득된 각 샘플점들의 변위를 이용하여 평면의 방정식을 통해 내부 변위를 보간함으로써 연산 시간을 감축함과 동시에 영역 내부의 단계적인 변위의 변화를 추정할 순 있다. 제안된 방법에 따르면, 분할된 영역을 사용함으로써 분할영역 자체가 구속 조건이 되어 특징 기반 기법들의 단점인 변위 보간의 문제점을 해결할 수 있다. 특히, 복수의 샘플점들 간의 변위차를 이용함으로써 영상 평면에 대해 깊이 방향으로 기울어진 영역 평면에 대한 변위의 기울기를 보간할 수 있음에 기인하여 조밀한 변위 맵을 얻을 수 있었다.

• Journal of Broadcast Engineering
• /
• v.19 no.1
• /
• pp.83-95
• /
• 2014

Hand posture recognition is an important technique to enable a natural and familiar interface in HCI(human computer interaction) field. In this paper, we introduce a hand posture recognition method by using a depth camera. Moreover, the hand posture recognition method is incorporated with MPEG-U based advanced user interaction (AUI) interface system, which can provide a natural interface with a variety of devices. The proposed method initially detects positions and lengths of all fingers opened and then it recognizes hand posture from pose of one or two hands and the number of fingers folded when user takes a gesture representing a pattern of AUI data format specified in the MPEG-U part 2. The AUI interface system represents user's hand posture as compliant MPEG-U schema structure. Experimental results show performance of the hand posture recognition and it is verified that the AUI interface system is compatible with the MPEG-U standard.

• The Journal of Korean Academy of Prosthodontics
• /
• v.49 no.1
• /
• pp.38-48
• /
• 2011

Purpose: Dentists suffer back, neck and shoulder pain during their careers due to bad operating posture. If dentists have a good operating posture ergonomically, there would be less pain and discomfort in the shoulder and back. Therefore, dentists should learn the Home position which enables dentists to approach a stable posture ergonomically. This study was to compare tooth preparation in the Home position and the Random position, and evaluate the clinical efficacy of the Home position. Materials and methods: Tooth preparation for fixed partial denture was performed on the maxillary left 2nd premolar and maxillary left 2nd molar at the two different operating positions were compared. The amount of occlusal reduction, marginal width, subgingival margin depth, and convergence angle were measured. A T-test was performed separately to compare the results of the Random position and the Home position. Results: 1. The amounts of average thickness of occlusal reduction on fossa were deficient to the ordered ones in the Random position and the Home position (P > .05). 2. The average subgingival margin depth of prepared margin on maxillary left 2nd premolar, maxillary left 2nd molar were excessive in the Random position than in the Home position. On the maxillary left 2nd premolar, there was no statistical difference in the Random position and the Home position except Distal midline, DL line angle, Lingual midline, ML line angle (P< .05). On the maxillary left 2nd molar, there was no statistical difference in the Random position and the Home position (P < .05). 3. Average convergence angle in the Random position and the Home position were excessive compared to the ordered angle. There was no statistical difference in the Random position and the Home position (P > .05). 4. Analysis of pearson correlation : In the Random position, the amounts of average thickness of occlusal reduction, the average subgingival margin depth of prepared margin, convergence angle were significantly associated with each other (P < .05). But in the Home position, they were not significantly associated with each other (P < .05). 5. The time needed for preparation in the Home position was faster or equal than that of the Random position as time went on. Conclusion: In conclusion, there were no significant differences between Home position and Random position in measures of occlusal reduction, marginal width, marginal depth, convergence angle. However, preparation time and incidence of damaging adjacent teeth were less in Home position than in Random position. Therefore, if trained properly, Home position which is more ergonomically stable can be adopted for clinical use.

• Journal of the Korean Institute of Gas
• /
• v.8 no.2 s.23
• /
• pp.15-27
• /
• 2004

The purpose of this paper is to improve the performance of Polymer electrolyte fuel cell(PEMFC) by studying the channel dimension of bipolar plates using commercial CFD program 'Fluent'. Simulations are done ranging from 0.5 to 3.0mm for different size in order to find the channel size which shoves the highst hydrogen consumption. The results showed that the smaller channel width, land width, channel depth, the higher hydrogen consumption in anode. When channel width is increased, the pressure drop in channel is decreased because total channel length Is decreased, and when land width is increased, the net hydrogen consumption is decreased because hydrogen is diffused under the land width. It is also found that the influence of hydrogen consumption is larger at different channel width than it at different land width. The change of hydrogen consumption with different channel depth isn't as large as it with different channel width, but channel depth has to be small as can as it does because it has influence on the volume of bipolar plates. however the hydrogen utilization among the channel sizes more than 1.0mm which can be machined in reality is the most at channel width 1.0, land width 1.0, channel depth 0.5mm and considered as optimum channel size. The fuel cell combined with 2cm${\times}$2cm diagonal or serpentine type flow field and MEA(Membrane Electrode Assembly) is tested using 100W PEMFC test station to confirm that the channel size studied in simulation. The results showed that diagonal and serpentine flow field have similarly high OCV and current density of diagonal (low field is higher($2-40mA/m^2$) than that of serpentine flow field under 0.6 voltage, but the current density of serpentine type has higher performance($5-10mA/m^2$) than that of diagonal flow field under 0.7-0.8 voltage.

• The Journal of Engineering Geology
• /
• v.7 no.3
• /
• pp.173-189
• /
• 1997

A study on the geological structure and geothermal gradient distribution was carried out to evaluate the feasibility of developing a new geothermal field in the Yusong area. It is suggested that geothermal water in the Yusong area is closely related with faults, dykes, and their dipping characteristics with the study of geothermal gradient distribution. A fault of EW direction locates in northern boundary of the study area and another fault of N40{\citc}W$ crosses the EW fault at the western part of the study area. Locations of faults are recognized quite well by lineaments, geophysical exploration and geothermal gradient distribution characteristics. Three sets of dyke are found in the study area. According to the result of the geothermal gradient distribution study, the location of geothermal anomaly belt and dykes coincide each other, and the area has the temperature gradient of larger than 3$^{\circ}C$ between the depths of 0.5m and 1.0m below ground surface. The thermal anomaly belt those temperature gradient is larger than 2.5$^{\circ}C$ between the depths of 0.5m and 1.Om below ground surface is expected in the direction of N80{\citc}W$ in the study area. The dirping of dyke is almost vertical according to the linear distribution of dykes on surface and the results of geophysical survey. From the distribution of geothermal anomaly belt and the locations of dyke, three locations for the development of hot spring water could be recommended and the depth that ensure over 4$0^{\circ}C$ geotheraral water is estimated as 170~200m below the ground surface.

• Journal of Korean Society of Forest Science
• /
• v.85 no.3
• /
• pp.416-425
• /
• 1996

Aboveground biomass, distribution of N and P in tree components, forest floor and the top 20cm of mineral soil, and litterfall were determined in adjacent 37-year-old plantations of Pinus rigida Mill. and Larix leptolepis Gord. on a sandy clay loam soil in Yangpyeong, Kyonggi Province. Total above-ground tree biomass for P. rigida and L. leptolepis were 138.2 and 127.2 t/ha, respectively, and did not differ between the two species. Nitrogen concentrations in stembark and foliage were all greater in L. leptolepis. Understory biomass contributed less than 2.0% of the total aboveground biomass but contributed up to 12.0% of the aboveground nutrient contents. Soil below L. leptolepis had higher concentrations of N and P. Total ecosystem N content (kg/ha) was greater for L. leptolepis (5,579) than P. rigida (4,147). Litterfall dry mass (kg/ha/yr) was greater for P. rigida (6,020) than L. leptolepis (4,191) whereas N contents in leaf litterfall (kg/ha/yr) was almost twice as large in L. leptolepis (28) than P. rigida (16). This common garden experiment suggests a strong influence of tree species on nutrient distribution and cycling in a forest ecosystem.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2006.05a
• /
• pp.194-199
• /
• 2006

쌍천유역의 강수량과 지하수위의 관계를 분석한 결과 융설효과를 확인하였고 갈수기에 지하수위가 현저히 저하됨을 확인하였다. 쌍천유역의 지하수위와 GOI의 상관관계를 분석한 결과 70일 이동평균값을 이용한 GOI가 가장 높은 상관관계를 보여주었다. 융설효과를 고려하기 위해서 먼저 유역의 DEM 자료를 이용하여 100m 간격으로 고도별 면적분포를 구하고 기온이 100m당 $0.5^{\circ}C$씩 감소하는 것을 고려하여 강수사상이 발생하면 $0^{\circ}C$ 이하가 되는 고도에서는 강설사상이 발생하는 것으로 가정하였다. 이 때 고도별 면적분포에서 구해지는 면적비를 고려하여 강수사상을 강우와 강설로 나누었다. 이후에 고도를 고려한 기온이 $0^{\circ}C$ 이상인 날에 그 고도의 설적이 모두 녹는 것으로 가정하였고 강우가 발생한 것으로 처리하였다. 유역평균 일최대침투량을 알아내기 위하여 강수량자료를 일정값 이상은 고정하여 수정된 강수량자료로 70일 이동평균값을 구하고 이 값들과 지하수위와의 상관관계를 분석해 본 결과 40mm가 일최대침투량으로 가정하였을 때 가장 높은 상관관계를 보여주었다. 쌍천유역의 경우 40mm가 한계침투량이다. 이렇게 수정된 강수자료를 이용하여 이동평균을 구하여 지하수위와의 상관관계를 구해본 결과 쌍천유역의 2003년부터 2005년까지 2개년 자료에 대해서 융설을 고려했을 때 상관관계가 더 높아짐을 알 수 있고 한계침투량을 고려했을 때도 상관관계가 더 높아짐을 알 수 있으며 융설효과와 한계침투량을 동시에 고려했을 경우에 가장 높은 상관관계를 얻을 수 있었다.$2.8g/cm^3$로 가정했을 때, 경상분지의 화강암류의 압력평균값이 약 $0.73{\sim}3.16kbar$의 범위를 가졌고, 경상분지내 백악기 화강암류의 정치 깊이는 $2.6{\sim}11.4km$범위를 가졌다. 이는 경상분지 화강암류에 대해 유추된 기존의 정성적인 생각과 일치한다는 것을 알 수 있었고, 각섬석의 $Al^T$함량을 이용한 여러 경험적, 실험적인 압력계가 많은 제한점이 있지만 경상분지의 백악기 불국사화강암류에는 정성적으로 유효함을 알 수 있었다. 우리는 최종적으로 경상분지내 백악기 화강암류는 천부관입 암체이고 노출된 화강암류가 천부지각이라는 것을 알 수 있었다. 것이 아니라 낙관적 예측을 수행하는 경향이 있음을 발견할 수 있었다.원밭, 화산회밭으로 6개 유형으로 분류할 경우 각각의 분포면적은 41.9%, 23.3%, 17.5%, 13.9%, 1.1. 2.2% 이었다. 도시화 및 도로확대 등 다양한 토지이용 및 지형개변으로 과거의 토양정보가 많이 변경되었다. 그래서, 앞으로는 인공위성자료 및 항공사진을 이용하여 빠르고 쉽게 활용할 수 있는 토양조사 방법개발과 기 구축된 토양도의 수정, 보완 작업이 필요한 절실히 요구되고 있는 현실이다.브로 출시에 따른 마케팅 및 고객관리와 관련된 시사점을 논의한다.는 교합면에서 2, 3, 4군이 1군에 비해 변연적합도가 높았으며 (p < 0.05), 인접면과 치은면에서는 군간 유의차를 보이지 않았다 이번 연구를 통하여 복합레진을 간헐적 광중합시킴으로써 변연적합도가 향상될 수 있음을 알 수 있었다.시장에 비해 주가가 비교적 안정적인