• Convergence Security Journal
• /
• v.10 no.3
• /
• pp.51-60
• /
• 2010

The expansion of internet technology has made convenience. On the one hand various malicious code is produced. The number of malicious codes occurrence has dramadically increasing, and new or variant malicious code circulation very serious, So it is time to require analysis about malicious code. About malicious code require set criteria for judgment, malicious code taxonomy using Algorithm of weakness difficult to new or variant malicious code taxonomy but already discovered malicious code taxonomy is effective. Therefore this paper of object is various malicious code analysis besides new or variant malicious code type or form deduction using visualization of strong. Thus this paper proposes a malicious code analysis and grouping method using visualization.

• Solar Energy
• /
• v.18 no.2
• /
• pp.69-89
• /
• 1998

The measured solar radiation incident on tilted surfaces by all directions has been widely used as important solar radiation data in installing solar collectors, hot water systems, and photovoltaic modules, and in designing solar buildings and houses. To maximize the incident beam radiation, the slope, which is the angle between the plane of the surface in question and the horizontal, and the solar azimuth angles are needed for these solar applied systems. To respond to above needs, a theoretical study with actual measurements on moving route of the sun is carried out. This study focuses on the development of an solar expert system and on the selection of slopes for solar absorber plates in Korea.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.26 no.3
• /
• pp.323-337
• /
• 2010

The objective of this study was to examine the availability of the new impression coping by comparing with conventional coping in implant pick-up impression technique. Five implant fixtures were installed on #14, 21, 23, 25, 27 in acrylic resin model. That model with 5 fixtures was standard model, which was divided 3 groups; using new flag type impression coping, conventional impression coping splinted with self-curing resin, conventional impression coping without splinting. We made metal circular cones for calculation 3-dimensional coordinates by attaching to implant fixtures or analogs. Three-dimensional relationships of each model were calculated. Data was analyzed by multiple ANOVA and Bonferroni. The accuracy of impression between using new flag type impression coping and conventional impression coping did not show differences in 3 - dimensional analysis.Within limitations of this study, the new flag type impression coping is available in implant pick-up impression technique.

• Journal of Korean Ophthalmic Optics Society
• /
• v.13 no.4
• /
• pp.37-42
• /
• 2008

Purpose: The objective of the study: At present, the spectacles, with its use as a medical aids or a fashion trimming, are recognized as one of the living necessities which can't be separated from human body. One of the features of spectacles is that it must be worn on any part of human body. Such a feature has to be satisfied under the condition an user keeps feeling comfortable with the rim of spectacles worn. In order to ensure meeting this condition, a criterion has to be arranged for the design of the rim of spectacles. In order to manufacture a rim of spectacles which allows an user to secure a comfortable range of vision as well as enhancing the feeling when to be worn, a manufacturing standard has to be established based on optical science. No precise rim of spectacles could be made from the manufacturing method depending on the manufacturer's sensibility. When the rim of spectacles was manufactured according to the incorrect standards, it may cause an user such a fatal result as myopia, hyperopia or astigmatism. Methods: This study focuses on providing a detailed explanation about the design of rim, which is the most important element during designing a rim of spectacles, making use of the optical elements of spectacles, and helping the manufacturers and the people who work in the spectacles-related business understand and recognize what is correct and exact and then leading them to establish a standard in respect to the manufacture and selection of spectacles. Results, Conclusions: Considering the fact there happen many errors in relation with the names of rim stipulated in the provisions of International Standards Organization (ISO), due to wrong interpretation by some of the rim manufacturers, the right interpretation should be given about the bridge which is directly connected to rim, so that the rims of spectacles manufactured in Korea could keep a favorable position in competing with the foreign products of same kinds.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.5D
• /
• pp.709-716
• /
• 2006

The rapid changes of family structure such as singles, working couples and so on have effects on a travel behaviour. One of the characteristics from this is the increasing portion of trip-chain, in which plural activities were conducted in a "single outgoing" travel. Therefore travel must be considered as location change to conduct various activities instead of pursuing single travel purpose. This paper specifies a behavioral homogeneous person group by a job, a possession of cars. Based on this classification of person groups and their activity diary, the sequence, time and travel mode of activities in a day can be verified. As a case study household survey was conducted in city Kongju. The survey result shows that the classification of behavioral homogeneous person group based on criteria like employment status and car ownership bring a good result to forecast trip generation in traffic zone.

• Progress in Medical Physics
• /
• v.16 no.3
• /
• pp.116-124
• /
• 2005

Absorbed dose dosimetry protocols of high energy photon and electron beams, which are widely used and based on an air kerma calibration factors, have somewhat complex formalism and limitations for improving dosimetric accuracy due to uncertainty of the physical parameters used. Recently the IAEA and the AAPM published the absorbed dose to water-based dosimetry protocol. In this work web-based dose calibration program for IAEA TRS-398 and AAPM TG-51 protocols were developed. This program developed using the Visual C$\#$ language can be used in the internet. User selectable dosimetry protocol on the web allows the absorbed dose to water data of the two protocols at a reference point to be easily compared, and enables to conveniently manage and understand the current status of the dosimetry calibration performed at participating institutions in korea. This program and the resultant database from the web-based calibration can be useful in developing new dosimetry protocols in Korea.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.1
• /
• pp.85-93
• /
• 2013

While relatively many researches have been performed on the legal issues of leverage buyout(LBO) in the Korean capital market, the on-going 'interdisciplinary studies' between the legal and the financial aspects of LBO financing structure seems to be relatively few so far. In this particular study, the concept and major financing structures on LBO have been discussed, by which domestic investors including institutional investors, may acquire in-depth knowledge on the issue given the dynamically changing circumstances surrounding the Korean domestic capital market. Moreover, legal analyses related to the conventional case studies on two types of LBO structures such as 'asset-backed LBO' and 'merger-related LBO', have been illustrated, coupled with the review of the previous literature on mergers & acquisitions(M&A) related to the financial aspects of LBO financing structure. From the director's perspective, who is employed by an acquired firm, legal issues in terms of 'fiduciary duty' and 'duty of loyalty' have been discussed, along with the logical scope of 'business judgement principle' in terms of modern finance theory.

• Journal of the Korean Society of Systems Engineering
• /
• v.17 no.1
• /
• pp.65-75
• /
• 2021

When the decommissioning of South Korea nuclear power plants is promoted in earnest with the permanent shutdown of Kori Unit 1 in 2017, a large amount of various types of radioactive waste will be generated. For minimal generation and safe management of decommissioning waste, the waste should be made by appropriate classification of the dismantling waste characteristics in accordance with physical, chemical and radiological characteristics to meet the acceptance criteria of disposal facilities. Replacing the preliminary inspection at the site for the compliance of the waste acceptance criteria (WAC) of medium and low-level radioactive waste with the generator's own radioactive waste certification program (WCP), from the perspective of disposal, the optimization of waste management at the national level contributes to the efficient availability of disposal, such as the processing of non-conforming radioactive wastes at the site. To this end, it is important to evaluate radioactivity in each system and area such as nuclear reactors before decommissioning is carried out in earnest, and the prior removal of harmful wastes is important. From waste collection to waste disposal, decommissioning waste should be managed at each stage in consideration of the acceptance criteria of disposal facilities to minimize the generation of non-conforming waste.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2010.10a
• /
• pp.36-37
• /
• 2010

Lab scale experiment was carried out to study applicability of BM (Beneficial Microorganisms) to the conventional SBR system for the shipboard sewage treatment. BM has been successfully applied to the wastewater treatment by the SBR process and hence this system maintained a stable effluent quality together with an increased treatment efficiency, meeting the requirements of IMO regulations. The SBR system facilitated by BM would be a suitable process for cruise ships in terms of the malodor control, treatment efficiency and operation conveniences.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.6 no.4
• /
• pp.82-88
• /
• 2012

The usage of recycling agent is the most effective way of enhancing the performance of recycled asphalt pavement. Generally, many countries accepted these recycling agents retarding the various types of cracks resulted in binder aging. Contrary to such general tendency, recycling agents are used as very small amount in domestic recycling plant. The main reason of this is relatively high price of recycling agent. Even though agent price is high, agent can be a effective and economical way of alternative in asphalt recycling. In this study, penetration and softning point test performed by using RTFO(Rolling Thin Film Oven) aged binder. And, PG(Performance Grade) at high temperature, fatigue and MSCR(Multi Stress Creep and Recovery) tests exercised. The oil type agent is worked well to retrieving target penetration number. In PG test, $G^*/sin{\delta}$ of agents identically showed high value and polymer type agent is good at recovery value.