• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.8 no.2
• /
• pp.90-100
• /
• 1975

The estimation of the pre-processing condition of oyster is of great importance for distributors and processors. This study was attempted to establish the basic data for evaluating the processing suitability of oyster, which is the most important shellfish for domestic use and export. The data were analysed by measuring the condition index, chemical composition and heavy metal content of oysters. In order to eliminate the manual work that has to be done on a tightly closed oyster shell and avoid shrinkage in the oyster meat which is attendant on the steaming process, chemical means to open oyster were examined. finding the method of pretreatment of polyphosphate for frozen oysters were attempted to improve the product quality. The prevention of undesirable color change of the canned oyster meat is another problem to solve. The important results are as follows : 1. The ratio of meat volume and meat weight to the holding capacity by shells may be useful as an index to measure the condition index of oysters. 2. As a whole, monthly changes of moisture and fat content in oysters were reversely correlated. Protein content slightly decreased from April and rapidly decreased in July, and again rapidly increased in August but from September to November decreased slightly. In April, the content of glycogen was 4 percent. From this period to September, glycogen was rapidly decreased. From July to September, it was only 0. 7 to 1 percent but increased from October. There were little seasonal changes in pH value. The pH value of oyster meat was 6.0 to 6.2. The crude ash content was slightly decreased from June to August. 3. The range of monthly change of heavy metal content are as follows: Total mercury was 0 to 0.019 ppm, cadmium was 0.026 to 0.053 ppm, copper was 0.111 to 0.594 ppm, and lead_was 0.061 to 0.581 ppm. 4. By the results of condition index, chemical composition and heavy metal content of oysters, the suitable harvest season as raw materials for processing was the end of December to the end of May of next year. 5. The pretreatment of 10 percent polyphosphate in 5 percent salt solution of oyster meat appeared effective to reduce thawing drip during cold storage. 6. The pretreatment of $Na_2EDTA$ and BHA did not show the color prevention effect to the canned oyster meat during storage. 7. Magnesium chloride affected to open the valves of oysters.

• Korean Journal of Materials Research
• /
• v.10 no.1
• /
• pp.97-106
• /
• 2000

In these respects the purpose of this research is manufacturing Co-W-P alloy thin film on the corning glass 2948 by electroless plating method using $NaH_2PO_2H_2O$ (sodium hypophosphite) as a reductant, and analyzing deposition rate, alloy composition, microstructure, and magnetic characteristics at various pH's and temperatures. For Co-P alloy thin film, the reductive deposition reaction occurred only in basic condition, not in acidic condition. The deposition rate increased as the pH and temperature increased, and the optimum condition was found at the pH of 10 and the temperature of 8$0^{\circ}C$. Also magnetic characteristics was found to be most excellent at the pH of 9 and the temperature of 7$0^{\circ}C$, resulting in the coercive force of 870Oe and the squareness of 0.78. At this condition, the contents of P was 2.54% and the thickness of the film was 0.216$\mu\textrm{m}$. For crystal orientation, we could not observe fcc for $\beta$-Co. On the other hand, (1010), (0002), (1011) orientation of hcp for $\alpha$-Co was observed. We could confirm the formation of longitudinal magnetization from dominant (1010) and (1011) orientation of Co-P alloy. For Co-W-P alloy thin film, coercive force was 500Oe and squareness was 0.6. For crystal orientation, (0002) orientation of $\alpha$-Co was dominatly found. Then we could confirm the formation of perpendicular magnetization. The content of P was constant at 0.8$\pm$0.2% and the content of W increased as the concentration of Na$_2$WO$_4$increased. When the concentration of Na$_2$WO$_4$was 0.1mol/L, the composition of W was 20%. We observed the changes of magnetic characteristics and microstructure of thin film depositions of Co-W-P by the heat treatment. For heat treatment, the temperature was increased step by step to 10$0^{\circ}C$, 20$0^{\circ}C$, 30$0^{\circ}C$, and 40$0^{\circ}C$ and it took 1 hour at each step in the reductive condition of hydrogen gas. By the heat treatment, flatness of surface was improved, but there were no changes on the magnetic characteristics and the microstructures.

• Journal of Korean Society of Forest Science
• /
• v.95 no.3
• /
• pp.334-341
• /
• 2006

This study was to investigate the growth of planted red pine (Pinus densiflora S. et. Z.) seedling, soil properties and understory vegetation structure after fertilizer treatments [unfertilized plot (control), CF plot (Combination Fertilizer), UF plot (Urea Formaldehyde Fertilizer)] in a Pinus densiflora stand planted after the forest fires in Gosung, Gangwon province. The height growth rates of seedlings in four years were 264% in unfertilized, 404% in CF, and 388% in UF plots, respectively. The root collar diameters were increased 340% in unfertilized, 454% in CF, and 427% in UF plots, respectively. No significant changes occurred in soil total nitrogen and potassium ion ($K^+$) with the fertilization. However, available $P_2O_5$, content in the soil surface (0-15 cm) increased with the fertilizer application. Soil organic matter increased significantly with fertilizer treatments, while gradual decrease occurred in unfertilized plots. Sodium ion ($Na^-$) decreased in all sites. Soil pH, CEC, calcium ion ($Ca^{2+}$) and magnesium ion ($Mg^{2+}$) contents were not significantly different among treatments. Although Shannon's species diversity index and species richness in understory vegetation did not change with fertilizer treatments, vegetation cover rates in forest floor increased significantly with the fertilization. These results suggest that the increase of pine seedling growth and vegetation cover rates with fertilization could enhance soil stabilization in forest tire areas.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.41 no.4
• /
• pp.519-525
• /
• 2012

Effects of cultivated conditions on antioxidant compounds and antioxidant activities of sweet potatoes (Ipomoea batatas (L.) Lam) were determined. The cultivated variety was Shinyulmi, and they were cultivated in a conventional culture, successful cropped hairy vetch culture, successful cropped barley cultivation, successful cropped rye cultivation, successful cropped mix-seeding of hairy vetch and barley, successful cropped mix-seeding of hairy vetch and rye, and not fertilizer. The brix degree, moisture, protein, and ash content of the sweet potatoes did not significantly change with the cultivated conditions. However amylose, total dietary fiber, and mineral content had significant changes. The total polyphenol, flavonoid, and tannin content of the methanolic extracts of the sweet potato's pericarp showed significant differences from cultivated conditions, however, the sweet potato's sarcocarp did not significantly change. The highest DPPH and ABTS radical scavenging activities of the methanolic extracts of the sweet potatoes were 958.81 and 663.53 mg TE/100 g in the sweet potato's pericarp on the successful cropped hairy vetch culture. Generally, there was a difference in antioxidant compound content and radical scavenging activity on the methanolic extract of sweet potato with cultivated conditions.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.38 no.2
• /
• pp.95-107
• /
• 2020

The purpose of this study is to provide the basic data by analyzing and analysing the Growth Conditions of old Trees in Yangdong village. This study investigated about the conducted on tree information, soil information, and tree health. The result are as follows. The trees information in Yangdong Village consists of Juniperus chinensis, Salix chaenomeloides, Salix pseudolasiogyne, Celtis sinensis, Zelkova serrata, Gleditsia japonica, and Gleditsia sinensis trees, The range of height was 4.0~17.0m, and the diameter was 0.51~1.34m, Juniperus chinensis trees of No.17 was most large. In the results of soil analysis, there showed that acidity was pH4.1~6.3, hardness of 5~48mm, organic matter content of 21.2~29.1g/kg, electrical conductivity(EC) of 0.34~1.76dS/m, available P₂O₅ of 79.8~451.6mg/kg, exchangeable K of 0.22~1.71cmol+/kg, exchangeable Ca of 4.98~7.44cmol+/kg, exchangeable Mg of 0.67~2.19cmol+/kg, exchangeable Na of 0.19~1.04cmol+/kg and cation exchange capacity(C.E.C) of 7.23~13.02cmol+/kg. As a result, the highest number of tree health levels is 8 of 11trees of Celtis sinensis, 2 of 7trees of Zelkova serrata, and 3 of Gleditsia sinensis, and 13 of 30 trees of health levels, The Older trees with high infection, spoil and hollowed part were the remaining trees except for the healthy part. Relatively, more than half of the number of targets is infected, decay, and the hollowed site, and it is necessary to perform surgery on the damaged area. In addition, preservation and protection measures should be implemented by supplying root nutrients for trees, controlling nutrients in the body to prevent secondary and tertiary damages that cause the infection site to metastasize to the health site, In order to continually monitor the trees, measures to improve the location environment and management of the trees should be sought.

• Korean Journal of Materials Research
• /
• v.9 no.3
• /
• pp.274-281
• /
• 1999

Usually sputtering and electroless plating methods were used for manufacturing metal-alloy thin film magnetic memory devices. Since electroless plating method has many merits in mass production and product variety com­pared to sputtering method, many researches about electroless plating have been performed in the United State of America and Japan. However, electroless plating method has not been studied frequently in Korea. In these respects the purpose of this research is manufacturing Co-Mn-P alloy thin film on the corning glass 2948 by electroless plating method using sodium hypophosphite as a reductant, and analyzing deposition rate, alloy composition, microstructure, and magnetic characteristics at various pH's and temperatures. For Co-P alloy thin film, the reductive deposition reaction 0$\alpha$urred only in basic condition, not in acidic condition. The deposition rate increased as the pH and temperature increased, and the optimum condition was found at the pH of 10 and the temperature of $80^{\circ}C$. Also magnetic charac­teristics was found to be most excellent at the pH of 9 and the temperature of $70^{\circ}C$, resulting in the coercive force of 8700e and the squareness of 0.78. At this condition, the contents of P was 2.54% and the thickness of the film was $0.216\mu\textrm{m}$. For crystal orientation, we could not observe fcc for $\beta$-Co. On the other hand,(1010), (0002), (1011) orientation of hcp for a-Co was observed. We could confirm the formation of longitudinal magnetization from dominant (1010) and (1011) orientation of Co-P alloy. For Co-Mn-P alloy deposition, coercive force was about 1000e more than that of Co P alloy, but squareness had no difference. For crystal orientation, (l01O) and (lOll) orientation of $\alpha$-Co was dominant as same as that of Co- P alloy. Likewise we could confirm the formation of longitudinal magnetization.

• Journal of Life Science
• /
• v.12 no.1
• /
• pp.16-25
• /
• 2002

To summarize our interpretation of the results, we can explain shown below. Optimum con dictions in order to soften of sea tangle leafs were treated in the solutions of 0.05% $CH_3$COOH at 9$0^{\circ}C$ for 0.5 hour, 0.2% $K_2$HPO$_4$at 10$0^{\circ}C$ for 0.5 hour and 0.3% NaHCO$_3$at 10$0^{\circ}C$ for 0.5 hour. After sea tangle leafs were treated in the solutions of 0.05% $CH_3$COOH at 9$0^{\circ}C$ for 0.5 hour and added 10% seasoning agent of 0.5% glutamic acid, 3% glycine, 5% sorbitol and 1.5% soy sauce. Contents of free amino acid in the leaflike tea were a large amount as alanine of 707.2 $\mu$mo1/100$m\ell$ and glutamic acid of 343.6 $\mu$mo1/100 $m\ell$. And contents of mineral were order Na of 49.38 ppm, Mg of 10.72 ppm, K of 10.56 ppm and Ca of 6.55 ppm. Powder tea was added 0.05% glutamic acid, 5% glycine, 5% glucose and 4% sodium chloride in sea tangle powder, and then pressure treatment at 11$0^{\circ}C$ for 1.5 hours. Contents of free amino acid in the powder tea were a large amount as glycine of 222.04 $\mu$mo1/100$m\ell$ and glutamic arid of 208.58 $\mu$mol/100$m\ell$. And contents of mineral were order Na of 104.24 ppm, Mg of 14.31 ppm, K of 9.68 ppm, Fe of 2.36 ppm, Ca of 2.00 ppm, Zn of 0.13 ppm, Cu of 0.10 ppm and Mn of 0.01 ppm.

• Korean Journal of Soil Science and Fertilizer
• /
• v.44 no.3
• /
• pp.353-360
• /
• 2011

In order to develop the application method of pig compost (PC) and liquid manure (LM) for whole crop barley cultivation, experiments were conducted at Munpo series (coarse loamy, mixed, nonacid, mesic family of Typic Fluvaquents) soil in Gyehwa-reclaimed land, six plots, a LM applied rate as N% ; non-application, chemical fertilizer (CF)100, 100, 50+50, 50+CF50 and (PC30+LM40)+LM50 as basal and additional fertilizer. $NO_3^-$-N content in soil was decreased as along with the growth of plant, highest in LM100% as basal fertilization at early growth stage and highest in (PC30%+LM40%)+LM40% and CF100% at last growth stage. Amount of $NO_3^-$-N and $NH_4^+$-N in soil was high in (PC30%+LM40%)+LM40% and CF100% of top soil but in subsoil significant difference was little in all treatment. Amount of OM, $A_V.P_2O_5$, T-N, exchangeable Ca and Na in soil was higher (PC30%+LM40%)+LM40% than non-application after harvest. Amount of nutrient uptake in plant was higher in CF100% and split application of LM than LM 100% application. Nitrogen utilization rate was in the order of CF100% >LM50%+LM50%=LM50%+CF50%>(PC30%+LM40%)+LM40% >LM100%. The yield of whole crop barley in (PC30%+LM40%)+LM40% and CF100% was 3.2 times more than in non-application ($309kg\;10a^{-1}$). Feed values such as crude protein and TDN was increased 1.0% ~ 1.4% in LM as split application than basal 100% treatment. Accordingly, in order to increase yield of a whole crop barley with application PC+LM in reclaimed land treat split application rather than to treat LM 100% into the land.

• Korean Journal of Organic Agriculture
• /
• v.27 no.1
• /
• pp.87-100
• /
• 2019

The study was initiated to compare crop productivity as affected by a long-term application with homemade liquid fertilizers in leading organic cucumber (Cucumis sativus L.) farms in Suncheon and Kimcheon provinces. A Suncheon farm have applied an EM (effective organism) liquid fertilizer for one year and fifteen years, designating as EM 1-year and EM 15-year plots, respectively, with 4-year and 5-year application of native microbes-liquid fertilizer in Kimcheon farm, designating as Micro 4-year and Micro 5-year plots, respectively. pH in the EM-liquid fertilizer was high to approximately 7.7, and EC in the Micro-liquid fertilizer was 0.1 dS/m higher than those of EM-liquid fertilizer, with similar macro-nutrient concentrations observed in the both liquid fertilizers. Soil EC was the highest to the 10.0 dS/m for the liquid fertilizer with EM 1-year and showed less than 1.5 dS/m for other liquid fertilizer plots. Micro-liquid fertilizer plots had soil OM contents less than 20 g/kg, which was approximately two times less than those of EM plots. Soil microbial properties were not significantly different among the liquid fertilizer plots. SPAD and PS II values were significantly increased by EM 15-year plots with high levels of soil OM and EC. Liquid fertilizer plot with EM 1-year had high concentrations of T-N, Ca, and Na in the cucumber crops but low concentrations of P and Mg, in particular for low K of 1.2% which was two times less than those of desired level for an optimum cucumber growth. The lowest fruit yield was observed for the liquid fertilizer plot with EM 1-year with the highest soil EC accumulated. Liquid fertilizer plot with EM 15-year produced the expanded volume of crop canopy and increased fruit yield. Therefore, long-term of continuous application with an organic liquid fertilizer would have sustainably improved soil stability and the crop productivity.

• Korean Journal of Plant Resources
• /
• v.34 no.4
• /
• pp.287-296
• /
• 2021

Recently, the pace of global climate change has tremendously increased, causing extreme damage to crop production. Here, we aimed to examine the growth characteristics and useful components of Angelica gigas under extreme heat stress, providing fundamental data for its efficient cultivation. Plants were exposed to various experimental temperatures (28℃, 34℃, and 40℃), and their growth characteristics and content of useful components were analyzed. At the experimental site, the ambient and soil temperature were 19.38℃ and 21.34℃, ambient and soil humidity were 81.3 % and 0.18 m³/m³, solar radiation was 162.05 W/m². Moreover, the soil was sandy-clay-loam (pH 6.65), with 2.66% organic matter, 868.52 mg/kg soil available phosphate, and 0.14% nitrogen. Values of most growth characteristics, including the survival rate (85%), plant height (38.66cm), and fresh and dry weight (41.3 g and 14.24 g), were the highest at 28℃. Although the highest content of useful components was observed at 34℃ (3.24%), there were no significant differences across temperatures. Growth characteristics varied across temperatures due to detrimental effects of heat stress, such as accelerated tissue aging, reduced photosynthesis, and delay of growth. Similar content of useful components across temperatures may be due to poor accumulation of anabolic products caused by impaired growth at extremely high temperatures.