• The Transactions of the Korean Institute of Power Electronics
• /
• v.9 no.3
• /
• pp.294-302
• /
• 2004

In this study, we developed the inverter system to control Induction motor for the vertically circulation parking facility. In the case of calling a pallet, a car parking space, we basically stoned conventional system's problems, pallet is uncontrollable to the fixed position and braking system was worn by forcer braking with remaining speed. Also, by appling to converter controller, added to power regenerative control function, we confirmed the reduce of power supply capacity and the energy saving effect according to increasing operation frequency. The validity of this system is verified by 55kw induction motor driving system. Via this study, the proposed system shows the efficient use of parking facility and good operation characteristics by implementing position and speed control effectively on condition of load and shows energy saying effect by power factor control for the vertically circulation parking facility operation.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.9 no.5
• /
• pp.491-497
• /
• 2004

This paper presents a new rotor position estimation method for brushless DC motors. It is clear that the estimation error of the rotor position provokes the phase shift angle misaligned between the phase current and the back-EMF waveforms, which causes torque ripple in brushless DC motor drives. Such an estimation error can be reduced with the help of the proposed neutral voltage-based estimation method that is structured in the form of a closed loop observer. A neutral voltage appearing during the normal mode of the inverter operation is found to be an observable and controllable measure, which can be dealt with for estimating an exact rotor position. This neutral voltage is obtained from the DC-link current, the switching logic, and the motor speed values. The proposed algorithm, which can be implemented easily by using a single DC-link current and the motor terminal voltage sensors, is verified by simulation and experiment results.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.191-191
• /
• 2016

대기압 저온 Ar 플라즈마 제트에서 발생되는 플라즈마에 대해 연구하였다. 플라즈마 제트의 본체는 주사기 바늘, 유리관 그리고 테프론 튜브로 구성되어 있다. 바늘의 앞부분은 유리관에 삽입되어 있으며 바늘의 뒷부분은 테프론 튜브와 연결되어 있다. 주사기 바늘에는 수십 kHz의 사인파를 발생시키는 DC-AC 인버터로 수 kV의 고전압을 인가해준다. 기체는 테프론 튜브를 통해 바늘의 안쪽으로 흐른다. 사용 기체는 Ar이며 유량은 3 lpm이다. 주사기 바늘형 전극의 내경은 1.3 mm, 외경은 1.8 mm, 총 길이는 39.0 mm이며 재질은 스테인레스강이다. 유리관의 내경은 2.0 mm, 외경은 2.4 mm, 총 길이는 80.0 mm이다. 자외선-근적외선 분광계를 이용하여 대기압 저온 Ar 플라즈마 제트에서 발생된 플라즈마의 분광 분석을 하였다. 플라즈마 제트에서 발생되는 플라즈마의 휘도는 대략 $10{\sim}30cd/m^2$이다. 플라즈마의 측정 위치, 플라즈마 제트의 입력 전압과 입력 전류, 기체 종류 등의 변수에 따른 분광 실험을 하였으며 이를 통해 얻은 분광 데이터를 일반적인 볼츠만 기울기법에 대입하여 플라즈마의 들뜸 온도를 측정하였다. 또한 Ar 플라즈마 제트의 분광 데이터를 수정된 볼츠만 기울기법에 대입하여 플라즈마의 전자 온도를 측정하였다. 이는 바이오-의료용 플라즈마 및 플라즈마 공정 등의 다양한 응용 분야에서 유용하게 활용할 수 있을 것이다.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.23 no.9
• /
• pp.124-129
• /
• 2009

Recently, PWM inverter is widely utilized for many industrial applications such as high performance drive and space vector pulse width modulation(SVPWM) inverter which has high voltage ratio and low harmonics compared to conventional PWM inverter. This paper presents the implementation on a field programmable gate array(FPGA) of a SVPWM module for a voltage source inverter. The SVPWM module consists of PWM generator, current and position sensor interface and dead time compensator. The implemented SVPWM module can be integrated with a digital signal processor(DSP) to provide a flexible and effective solution for high performance voltage source inverter and for the use of multi-motor control. The performance of SVPWM module is verified by simulation and several experimental results.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.5 no.4
• /
• pp.403-408
• /
• 2000

In this paper, voltage control APF(Active Power Filter) is introduced to improve power factor and reduce harmonics generated from nonlinear load. The voltage controlled APF which is consisted of inverter and passive filter operates with nonlinear load simultaneously. Real power supplies from main power to load and reactive power provides from APF to load. According to the results o experiment and simulation, it is proved that the proposed system has the performance of improving power factor and reducing harmonics.

• Proceedings of the KIPE Conference
• /
• 2014.07a
• /
• pp.512-513
• /
• 2014

본 논문은 3상 인버터에서 직류단 션트 저항을 이용하여 전류를 복원하는 새로운 기법에 대하여 제안한다. 직류단 션트 저항을 이용하여 전류를 측정할 경우, 전동기의 구동에 따른 지령 전압 벡터의 변화에 따라 SVPWM 헥사곤 내부에는 전류의 측정이 불가능한 영역이 존재한다. 기존의 방법들은 지령 벡터가 전류 측정이 불가능한 영역에 위치할 때, 스위칭 패턴에 변화를 주는 방법들을 이용하였다. 그러나, 이 기법들은 스위칭 패턴을 바꾸기 때문에 소음 및 전류 왜곡의 원인이 된다. 본 논문에서는 스위칭 패턴의 변화 없이 전류를 추정할 수 있는 새로운 기법을 소개한다. 제안된 알고리즘의 효율성은 실험적 결과를 통해 증명한다.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.4 no.5
• /
• pp.462-473
• /
• 1999

This paper addresses the current measurement issue of all digital field oriented control of ac motors. The p paper focuses on the effect of low-pass filter and also on the sampling of the fundamental component of the m motor current. The low-pass filter, which suppresses the switching noise of the motor current, introduces v variable phase delay according to the current ripple frequency. It is shown that the current sampling error c consists of the fundamental component and high frL'quency ripple components. In this paper, the dependency of t this current sampling e$\pi$or on the reference voltage vector is investigated analytically and a sampling technique i is proposed to minimize the error. The work is based on the three phase symmetry pulse width modulation l inverter driving an induction machine. With this technique, the bandwidth of current regulator can be extended t to the limit given by the switching frequency of the inverter and more precise torque regulation is possible.

• New & Renewable Energy
• /
• v.16 no.1
• /
• pp.47-57
• /
• 2020

In Floating PV (Photovoltaic) systems, PV modules are installed on water by utilizing the surface of idle water such as a reservoir and multipurpose dam. A floating PV system, therefore, has the advantage of efficiency in national land use and improved energy yield owing to cooling effect compared to on-land PV systems. Owing to the limitation of installation environment for a floating PV system, the system, however, has the disadvantage of an increase in transmission distance of DC (Direct current) cables. A longer transmission distance of a DC cable results in greater power loss due to a voltage drop. This leads to a decline in economic feasibility for the floating PV system. In this paper, the economic analysis for 10 floating PV systems installed in a reservoir has been conducted in terms of a change in annual power sales according to the variation of transmission losses depending on the factors affecting the voltage drop, such as transmission distance, cross-section area of underwater cable, the presence of joint box, and PV capacity.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.16 no.2 s.93
• /
• pp.154-160
• /
• 2005

Microwave Otters are essential device in modem wireless systems. A compact dimension BPF(Band-pass Filter) for IEEE 802.11a WLAN service is realized using LTCC multi-layer process. To extrude 2-stage band-pass equivalent circuit, band-pass and J-inverter transform applied to Chebyshev low-pass prototype filter. Because parallel L-C resonator is complicate and hard to control the inductor characteristics in high frequency, the shorted $\lambda/4$ stripline is selected for the resonator structure. The passive element is located in the different layers connected by conventional via structure and isolated by inner GND. The dimension of fabricated stacked band-pass filter which is composed of six layers, is $2.51\times2.27\times1.02\;mm^3$. The measured filter characteristics show the insertion loss of -2.25 dB, half-power bandwidth of 220 MHz, attenuation at 5.7 GHz of -32.25 dB and group delay of 0.9 ns at 5.25 GHz.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.17 no.12 s.115
• /
• pp.1150-1155
• /
• 2006

In this paper, the equivalent circuit of tapped-line that is applied in the band-pass filter is suggested and the value of an equivalent circuit is mathematically defined. An equivalent circuit of tapped-line is composed by open stub and transmission line that has negative electrical length, and the position of tapped-line and the value of resonator's length can be obtained by the impedance of resonator and the inverter. The new design method using equivalent circuit leads to very good agreement compared with theoretical value. The hair-pin band-pass filter using equivalent circuit of tapped-line shows the insertion loss of 1.1 dB and the return loss of 20 dB at the center frequency of 2 GHz.