• Proceedings of the Korea Water Resources Association Conference
• /
• 2010.05a
• /
• pp.1044-1048
• /
• 2010

해수를 이용한 세계최초의 해수수로인 송도 신도시 중앙공원 해수수로는 서해안에서 집수된 해수를 $5{\mu}m$의 공극 크기를 가지는 해수처리시설 (STF, seawater treatment facility)에 의해 여과된 뒤 2곳의 해수공급 지점에서 해수수로로 공급된다. 여과된 해수는 수로로 155L/sec의 유량으로 1.8km를 흐른 뒤 서해로 방류된다. 이러한 인공 해수수로에서는 흐름정체에 따른 수질 문제와 영양염에 의한 적조를 유발하는 조류 성장이 문제가 된다. 따라서 본 연구에서는 3차원 수치모형을 이용한 인공 해수수로내의 흐름특성 모의와 수질 모니터링의 통한 조류 생성 특성 및 장소를 비교하여 그 상관성을 분석하고자 한다. 수치모의 실험은 3차원 수치모형인 FLOW-3D를 이용하였으며, 격자망 형태는 직사각형 직각 격자가 사용되었다. 현장 모니터링을 통하여 획득한 수질 데이터와 비교 분석을 통하여 해수수로 내 해수 흐름 특성변화(유속, 와도 등)와 조류생성에 미치는 영향을 비교 분석하였다. 해수 수로내의 평균 유속은 0.01m/s 이었으며, 수로의 형상에 따라서 정체수역이 발생하였다. 이러한 정체수역은 현장 모니터링을 통하여 예측된 조류 발생 지역과 일치하였다. 이러한 흐름 특성과 조류생성과의 상관성 규명을 통하여 인공수로의 물순환 시스템 설계시 조류 생성을 억제할 수 있는 최적 관리를 위한 설계의 기초 자료를 제공할 수 있을 것으로 판단된다.

• Proceedings of KOSOMES biannual meeting
• /
• 2007.05a
• /
• pp.35-41
• /
• 2007

인공위성영상을 이용한 해양정보 추출을 위하여 SAR 위성영상을 이용한 해수유통 정보 추출을 연구하였다. SAR(Synthetic Aperture Radar) 위성영상의 도플러 쉬프트 정보를 이용한 해수유동 정보 추출은 적용기술의 근본적 한계로 인하여 실제 유속이 아니라 위성궤도의 법선방향에 대한 유속강도만을 제시하는 문제가 있다. 이러한 한계 및 문제점을 극복하기 위하여 본 연구에서는 위성영상 촬영과 통일한 시간에 동일한 해역에서 해수유통을 관측하고, 관측된 해수유통 정보를 이용하여 위성영상에서 추출된 해수유동 정보를 보완 검증 하였다. 위성영상 추출 해수유통정보의 위성궤도 법선방향 유속강도는 관측된 해수유통 유향분포도에 근거하여 실제 해수유동 유향에 맞게 보정될 수 있었으며, 보정된 해수유통 정보는 실제 해수유동 분포를 잘 반영할 수 있었다.

• Journal of the Korean Chemical Society
• /
• v.51 no.4
• /
• pp.305-311
• /
• 2007

Based on the cyclic voltammograms, potentiodynamic polarizations, transient and steady state Tafel plots and electrochemical impedence spectroscopy, we proposed the copper redox mechanism of the corrosion and passivation in artificial sea water. The copper redox mechanism showed the dependence of the concentration of oxygen in artificial sea water and electrode potentials.

• 대한방사선방어학회:학술대회논문집
• /
• 2009.04a
• /
• pp.110-111
• /
• 2009

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.18 no.1
• /
• pp.93-100
• /
• 2014

Steel reinforcement buried in concrete structure in submerged zone does not easily become corroded due to lack of dissolved oxygen. For that reason, accelerated corrosion test in submerged state is performed with an electrochemical method, which is not suitable for actual corrosion mechanism and makes it difficult to find relevance with long-term behavior. In this study, accelerated corrosion test was performed with the temperature and chloride concentration as main variables in order to establish a method for accelerated corrosion test in submerged zone. Corrosion was determined by the result of reinforcement corrosion monitoring based on galvanic potential measurement and half-cell potential method. The accelerated corrosion test result showed that temperature had the most dominant influence. To determine the chloride content, chloride concentration by depth in the test sample was measured. With the same conditions, chloride penetration interpretation was performed by DuCOM, a FEM durability interpretation program. Also, a test was performed to measure dissolved oxygen according to soaking conditions of artificial seawater, which was used for verifying the validity of the accelerated corrosion test result.

• Journal of the Korean GEO-environmental Society
• /
• v.14 no.8
• /
• pp.23-27
• /
• 2013

In this study, efficiency of pre-treatment of turbid seawater was measured where micro-air bubbles were used to remove particles in seawater after input of natural coagulant PGA. Artificial seawater was prepared having the intended trubidity using marine sediments and microalgae. 73.7% of turbidity removal was achieved when 0.5g/L of $AlCl_3{\cdot}6H_2O$ was added in the artificial seawater, but 92.4% of turbidity removal was observed when 0.05g/L of PGA was added in the artificial seawater containing microalgae. In addition, much greater turbidity removal was achieved for microalage than sediments. For both cases, input of 0.1g/L PGA and following additional input of micro-air bubbles for 5 seconds resulted in the maximum removal efficiency where reaction time of coagulation was 1 min and flotation by micro-air bubbles was 10 min. From this study, we concluded that micro-air floation after coagulation could be a possible economical pre-treatment method for highly turbid seawater.

• Korean Journal of Materials Research
• /
• v.2 no.2
• /
• pp.133-142
• /
• 1992

The slow strain-rate test($1{\times}10^{-4}~1{\times}10^{-7}sec^{-1}$) was performed to understand the tensile properties of chopped strand glass mat/polyester composite in air and synthetic sea water. (pH 6.0, 8.2, 10.0) For the tested composite subjected to tensile loading in air and synthetic sea water (ph 6.0, 8.2, 10.0), the tensile properties are a little decreased as strain rate decrease and a little decrease in stiffness is observed in $1{\times}10^{-7}sec^{-1}$. The tensile properties were some changed in case the pH value in synthetic sea water is varied.

• The Journal of Engineering Geology
• /
• v.34 no.1
• /
• pp.25-38
• /
• 2024

Laboratory tests of accelerated artificial weathering compared the effects of seawater and acidified distilled water on rock weathering. The experiments simulated chemical and physical weathering of five different types of volcanic rock by applying 45 freeze-thaw cycles using seawater and acidified distilled water (pH 3), both at 70℃. The physical properties and uniaxial compressive strength (UCS) of the rocks were measured after 15 and 45 cycles of artificial weathering. Most of degradation of physical properties appeared within the first 15 cycles, and acidified distilled water had a greater effect than seawater. Analysis of variance (ANOVA) statistically evaluated the differences in UCS of the different rock types during the tests. The rate of UCS reduction after 45 cycles was similar across the samples, being independent of the rock type and the trend of changes in physical properties. In contrast to the changes in the physical properties, the UCS was more affected by seawater than by acidified distilled water.

• Journal of Korean Society of Environmental Engineers
• /
• v.27 no.9
• /
• pp.995-1005
• /
• 2005

The study with laboratory sandbox model has been carried out to address potential use of reclaimed water, as a countermeasure artificially recharging the coastal aquifer, to effectively prevent from seawater intrusion due to overexploitation. It also investigated plausibility for either preserving or recovering the freshwater interface facing with seawater intrusion. To do this, we assessed hydraulic properties in artificial aquifer seawater/freshwater interface) depending upon the variation of extraction, storage and injection of reclaimed water. The variation of interface between freshwater and seawater were visualized by Surfer 8(Golden Software, USA) according to given experimental conditions. The interface between seawater and freshwater has been sensitively influenced by the change of extraction rate, where seawater zone migrated much faster into freshwater zone even though extraction rate became decreased. However, decreasing recharge rate could slow down moving of saline water zone toward freshwater zone. When the recharge was solely introduced into the sand box model, saline water intrusion was retarded than those of recharge and extraction working together. And also, the level of salinity of saline water was diluted by artificial recharge. It finally revealed that the artificial recharge would hydraulically avoid seawater intrusion while the freshwater sources could be conservatively utilized.

• Proceedings of the KSRS Conference
• /
• 2009.03a
• /
• pp.360-366
• /
• 2009

AQUA/AMSR-E 인공위성 자료를 활용하여 3차원 최적내삽 해수면온도 합성장을 생산하였고 시간평균장과 비교하여 문제점과 한계점을 기술하였다. 3-D SST 합성장은 북태평양 중앙부에서 전체적으로 $0.05^{\circ}C$ 이하의 작은 오차를 보였으나, 위성 결측이 있는 연안에서는 $0.4^{\circ}C$ 이상의 비교적 큰 오차를 유발하였다. 강한 강수나 구름으로 인한 결측이 있는 부분에서는 $0.1\sim0.15^{\circ}C$에 달하는 오차를 보였다. 시간평균장과 비교한 결과, 구름 부근의 화소에서는 해수면온도를 낮게 계산하는 경향이 있었으며, 해수면온도의 공간적 구배를 감소시키는 평활화가 전체적으로 나타났다. 저위도에서 OI SST는 실제 해수면온도에는 없는 불연속성을 만드는 경향이 있었고, 이는 OI 과정에서 사용한 윈도우의 크기와 해양 현상의 수평 규모가 위도에 따라 변화하는데서 기인하였다. 현상의 공간 규모의 척도인 로스비 내부 변형 반경은 북태평양에서 O(1) 정도로 위도에 따른 공간적 변화가 큰 것으로 나타났다. 본 연구는 SST 합성장 생산 과정에 위도와 해수의 수직적 밀도 구조와 밀접한 관련이 있는 해양 현상의 수평적 규모의 시공간적 변동 특성을 고려해야 함을 제시한다.