• 제목/요약/키워드: 익형특성

검색결과 126건 처리시간 0.024초

복합재료회전익의 주축계 결정화에 관한 연구 (Study on Determination Principal Direction for Composite Rotor Blades)

  • 유용석;이종범;정경렬
    • 한국소음진동공학회:학술대회논문집
    • /
    • 한국소음진동공학회 1995년도 춘계학술대회논문집; 전남대학교, 19 May 1995
    • /
    • pp.354-359
    • /
    • 1995
  • 회전익의 소재로 복합재료를 선택하게 됨에 따라 헬리콥터의 유지, 보수 및 성능에서 유리하게 되었지만 허브 형태의 간소화로 인하여 해석상의 어려움은 확대 되었다고 할 수 있을 것이다. 따라서 회전익의 단면특성은 더욱 중요한 의미를 갖게 되었다. 회전익의 단면특성을 결정하기 위해서 우선적으로 각 방향운동의 연성항을 소거하는 것이 계산상 유리하고 따라서 관성주축방향을 결정하는 것이 중요하다. 그러나 회전익의 익형이 대칭형이 아니고 복합한 재료로 구성되어 있을 뿐 아니라 효율의 극대화를 위하여 축방향을 따라 비틀림을 부여하고 있기 때문에 관성주축의 방향을 결정하는데 많은 어려움이 존재한다. 따라서 본 연구에서는 실제 회전익을 그 연구 대상으로 회전익 단면의 등가강성행렬을 추출하고 외팔보의 공학이론과 회전행렬을 이용하는 방법으로 관성주축방향을 결정하는 방법을 제시하였다. 해석방법의 타당성을 확보하기 위하여 엄밀해를 알고 있는 간단해 단면을 갖는 외팔보를 이용하여 검증하였다. 이러한 방법은 관성주축방향을 결정하는 새로운 프로그램의 개발이라는 부담을 최소화 하였을 뿐 아니라, 해석방법 자체가 가지는 간편성으로 인하여 많은 시간과 노력을 줄일수 있을 것으로 기대된다.

  • PDF

전달 매트릭스를 이용한 풍력 터빈 블레이드의 회전속도에 따른 동특성 변화 해석 (Analysis of Dynamic Characteristics by Rotational Speed of Wind Turbine Blade using Transfer Matrix)

  • 이정우;신동호;오재응;이정윤
    • 한국소음진동공학회:학술대회논문집
    • /
    • 한국소음진동공학회 2012년도 춘계학술대회 논문집
    • /
    • pp.144-149
    • /
    • 2012
  • The transfer matrix method is used to determine the dynamic characteristics(natural frequencies and mode shapes) by rotational speed of wind turbine blade. The problems treated on this study is coupled flapwise bending and chordwise bending of pre-twisted nonuniform wind turbine blade. The orthogonality relations that exist between the vibrational modes is derived and the algorithm for determination of the natural vibrational characteristics is suggested.

  • PDF

전산해석을 이용한 고양력장치의 동특성 고찰 (Computational Study on Dynamic Characteristics of a Flapped Airfoil)

  • 이융교;김철완
    • 한국전산유체공학회:학술대회논문집
    • /
    • 한국전산유체공학회 2011년 춘계학술대회논문집
    • /
    • pp.206-209
    • /
    • 2011
  • During landing approach, an airplane could experience dynamic unstable motion by the combination of a gust and elevator control to cancel the disturbances. This situation is dangerous and could lead to a loss of an airplane. In this paper, numerical analysis was used to study the effect of pitch oscillating 2-D high lift devices in a landing condition. Experimental data on a pitching naca0012 airfoil was used for code validation. Dynamic characteristics of an airfoil, single slotted flap for mid-class passenger aircraft were analyzed. Unsteady Navier-Stokes analysis was performed with Spalart-Allmaras turbulence model for separation dominant low speed flow. As a result, flow hysteresis of a flapped airfoil was more complex than that of an oscillating airfoil. So, dynamic analysis of a flap in a landing condition is very important for operational safety.

  • PDF

Flatback 에어포일의 뒷전 두께에 따른 공력 특성 연구 (A Study on Aerodynamic Characteristics of Flatback Airfoils)

  • 문찬웅;최태훈
    • EDISON SW 활용 경진대회 논문집
    • /
    • 제1회(2012년)
    • /
    • pp.17-20
    • /
    • 2012
  • 본 연구는 전산유체해석 프로그램인 EDISON_CFD를 이용하여 NACA63-425 에어포일과 이 에어포일을 기반으로 만든 뒷전 두께가 2% 4%인 NACA63-425G02, NACA63-425G04에 대하여 두께 변화에 따른 공력 특성 변화를 수치해석을 수행 하였다. 난류점성내의 압축성 조건에서 받음각에 따른 양력계수, 항력계수, 양항비 등을 비교하여 Flatback 에어포일의 장단점에 대하여 결과를 분석해 보았다.

  • PDF

부즈만 형의 초음속 복엽항공기에 대한 공력 특성 연구 (A Study on Aerodynamic Characteristics of Busemann Type Supersonic Biplane)

  • 문찬웅;김훈;유기완
    • EDISON SW 활용 경진대회 논문집
    • /
    • 제2회(2013년)
    • /
    • pp.425-430
    • /
    • 2013
  • 본 연구에서 전산유체해석 프로그램인 EDISON_CFD를 이용하여 차세대 항공기 날개 형상으로 각광받고 있는 초음속 비행조건을 갖는 Busemann 형식의 복엽기 형상에 대한 공력특성을 연구하였다. 날개는 압축성 조건에서 2차원 에어포일로 간략화 하여 모델링하였으며, 마하수에 따라 발생하는 충격파와 팽창파의 상호작용을 통한 소닉붐의 감소 형태를 분석해 보고, 마하수에 따른 항력계수를 얻어내었으며, 익형과 항력계수, 소닉붐의 상관관계를 분석하여 초음속항공기에서 복엽기 형상이 가지는 장단점에 대하여 연구하였다.

  • PDF

풍력 블레이드 적용을 위한 고유익형 KA2의 공력특성 (Aerodynamic Characteristics of the Original Airfoil KA2 for the Application of Wind Turbine Blade)

  • 우영진;강덕훈;이장호
    • 풍력에너지저널
    • /
    • 제5권1호
    • /
    • pp.33-42
    • /
    • 2014
  • The new aerofoil, KA2 was designed to apply to the wind turbine blade. For the aerofoil, numerical analysis was performed to review aerodynamic characteristics like lift and drag coefficient. And they are verified with test data using the digital wind tunnel and test samples from 3D printer. The digital wind tunnel was developed to test wing in the small laboratory, and verified with test of NACA0012 airfoil. KA2 aerofoil is asymmetric, and has the thickness ratio of 14%, and 12 degree of AOA at the maximum lift coefficient of 1.3. In this paper, aerodynamic characteristics from numerical and test approaches will be proposed with AOA in detail. Therefore, this aerofoil will be used for the design of wind turbine blade.

주기적 후류 내의 익형 위 천이경계층에 관한 실험적 연구(II) -위상평균된 유동특성- (Experimental Study of Boundary Layer Transition on an Airfoil Induced by Periodically Passing Wake (II) -A Phase-Averaged Characteristic-)

  • 박태춘;전우평;강신형
    • 대한기계학회논문집B
    • /
    • 제25권6호
    • /
    • pp.786-798
    • /
    • 2001
  • This paper describes the phenomena of wake-induced transition of the boundary layers on a NACA0012 airfoil using measured phase-averaged data. Especially, the phase-averaged wall shear stresses are reasonably evaluated using the principle of Computational Preston Tube Method. Due to the passing wake, the turbulent patch is generated in the laminar boundary layer on the airfoil and the boundary layer becomes temporarily transitional. The patches propagate downstream with less speed than free-stream velocity and merge with each other at further down stream station, and the boundary layer becomes more transitional. The generation of turbulent patch at the leading edge of the airfoil mainly depends on velocity defects and turbulent intensity profiles of passing wakes. However, the growth and merging of turbulent patches depend on local streamwise pressure gradients as well as characteristics of turbulent patches. In this transition process, the present experimental data show very similar features to the previous numerical and experimental studies. It is confirmed that the two phase-averaged mean velocity dips appear in the outer region of transitional boundary layer for each passing cycle. Relatively high values of the phase-averaged turbulent fluctuations in the outer region indicate the possibility that breakdown occurs in the outer layer not near the wall.

천음속 익형 유동에 있어서 비평형 응축이 충격파 진동에 미치는 영향 (Effect of Nonequilibrium Condensation on the Oscillation of the Terminating Shock in a Transonic Airfoil Flow)

  • 김진수;이성진;;권순범
    • 대한기계학회논문집B
    • /
    • 제36권1호
    • /
    • pp.61-66
    • /
    • 2012
  • 본 연구에서는 NACA0014 천음속 익형 유동에 있어서 비평형 응축이 Terminating shock 의 진동에 미치는 영향을 TVD 수치해석을 통하여 연구하였다. 주류 마하수 0.81-0.87 에 대해 정체점 상대습도가 유동 특성에 미치는 영향이 구명되었다. 받음각 ${\alpha}=0^{\circ}$ 정체점 온도(288K) 및 주류 마하수가 동일한 경우, 정체점 상대습도의 증가는 Terminating shock 의 충격파 강도를 약화시키고 충격파의 진동수도 감소시킨다. 정체점 상대습도가 동일한 경우는 주류 마하수가 클수록 충격파의 진동수는 증가한다. 정체점 상대습도가 동일한 경우, 충격파의 이동거리는 주류 마하수가 클수록 증가하는 것으로 나타났다. 특히, 충격파가 동일한 x/c 에 위치하는 경우, Terminating shock 의 충격파 강도는 충격파가 상류로 이동할 때가 하류로 이동할 때보다 강하게 된다.

Gurney플랩과 제트 플랩을 혼용한 유동제어 기법에 관한 수치적 연구 (Numerical Study About Flow Control Using Blending Gurney Flap with Jet Flap)

  • 최성윤;권오준
    • 한국항공우주학회지
    • /
    • 제35권7호
    • /
    • pp.565-574
    • /
    • 2007
  • 본 연구에서는 NACA 0012 익형 주위의 비교적 높은 레이놀즈수 유동장에 대한 Gurney 플랩과 제트 플랩을 혼용한 유동제어 기법의 유동제어 특성에 대하여 비정렬 격자계를 사용하는 수치적 기법을 이용하여 살펴보았다. 혼합제어 기법의 유동제어 특성을 파악하기 위하여 유동제어에 따른 공력계수 및 모멘트 계수의 변화를 혼합제어 기법을 구성하는 각각의 유동제어 기법들의 결과들과 비교하여 살펴보았다. 혼합제어 기법의 경우 제트 플랩만을 고려한 경우에 비하여 상당히 낮은 무차원 세기의 제트를 이용하여도 유사한 양력 향상 특성을 획득할 수 있었으며, Gurney 플랩만을 이용한 경우에 나타나는 항력의 증가를 완화시켜 주었다.

채널 내를 비행하는 가변스팬 날개 공력특성 I (가로세로비 및 안내로 영향) (Aerodynamic Characteristics of a Variable Span Wing Flying Inside a Channel I (Effects of Wing Aspect Ratio and Guideway))

  • 한철희
    • 항공우주시스템공학회지
    • /
    • 제10권4호
    • /
    • pp.11-16
    • /
    • 2016
  • 본 논문에서 채널 안내로를 비행하는 가변스팬 날개의 공력특성에 관한 실험연구를 수행하였다. NACA 0012익형을 가진 가변스팬 날개를 제작하였으며 선형서보모터를 사용하여 작동시켰다. 날개의 가로세로비, 지면효과, 날개와 펜스사이의 거리가 날개의 공력특성에 미치는 영향을 조사하였다. 연구결과 지면 및 펜스 모두 항공기 날개의 양력을 증가시켰으며 지면효과와 달리 펜스는 날개의 항력에 큰 영향을 미치지 않았다. 가변스팬 메커니즘이 플랩사용이 제한되는 상황에서 효과적인 고양력 장치로 사용가능할 것으로 판단된다.