• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2001.04a
• /
• pp.59-62
• /
• 2001

An axial-type turbine design technology is developed. In order to design one-stage turbine, preliminary design method is applied, and then design parameters are chosen after analyzing the gas properties within the turbine passage using the streamline curvature method. Stator blade is designed using C4 Profile, and rotor blade is designed using shape parameters. The output power is measured with various RPM and input power. The experimental result shows that the output power is proportionally decreased with the negative incidence angle.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.38 no.10
• /
• pp.955-965
• /
• 2010

The MH-75 propeller for the MAV propulsion is designed using a free vortex design method which considers design parameters such as the hub-tip ratio, the twist angle distribution, the maximum camber location and the chord length of the propeller blade. Aerodynamic characteristics of the MH-75 propeller are predicted by changing the flight speed using the frequency domain panel method. And, the thrust characteristics of the MH-75 propeller are measured using the balance system of the subsonic wind tunnel for the validation of numerical results. The performance characteristics of the MH-75 propeller satisfied with design requirements. Numerical results of the MH-75, which are predicted by the frequency domain panel method, are more agree with experimental results compare with XFOIL.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.36 no.4
• /
• pp.337-345
• /
• 2008

this study, three dimensional surface pressure distributions of SWIM whose main wing has NACA4412 airfoil with NACA0012 flaps were experimentally measured by pressure sensitive paint. Surface pressures on suction and pressure sides of the wing were measured by changing an angle of attack at a Reynolds number of 3.1x105 in KARI 1m subsonic wind tunnel. The experimental results showed that as an angle of attack increases minimum pressure region on a suction side moved from the wing root to the tip and low pressure region around trailing edge of the wing tip which causes wing tip vortex was observed. Although low pressure region at the tip still observed at an angle of attack 15 deg., other area on a suction side showed flat pressure distribution in a span-wise direction. It was also observed that the mean value of pressure coefficients was about 0.077 through a comparison between PSP and pressure taps at the same test conditions.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.45 no.3
• /
• pp.233-240
• /
• 2017

The flowfield around transonic wing-body configuration was simulated using in-house CFD code and compared with the experimental data to understand the influence of several features of CFD(Computational Fluid Dynamics) ; grid dependency, turbulence models, spatial discretization, and viscosity. The wing-body configuration consists of a simple planform RAE Wing 'A' with an RAE 101 airfoil section and an axisymmetric body. The in-house CFD code is a compressible Euler/Navier-Stokes solver based on unstructured grid. For the turbulence model, the $k-{\omega}$ model, the Spalart-Allmaras model, and the $k-{\omega}$ SST model were applied. For the spatial discretization method, the central differencing scheme with Jameson's artificial viscosity and Roe's upwind differencing scheme were applied. The results calculated were generally in good agreement with experimental data. However, it was shown that the pressure distribution and shock-wave position were slightly affected by the turbulence models and the spatial discretization methods. It was known that the turbulent viscous effect should be considered in order to predict the accurate shock wave position.

• Aerospace Engineering and Technology
• /
• v.9 no.1
• /
• pp.78-83
• /
• 2010

In the present paper, a flap was optimized to maximize the lift. A 2-element fowler flap system was utilized for optimization with an initial shape of general aviation airfoil and a flap shape designed by Wentz. Response surface method and Hicks-Henne shape function were implemented for optimization. 2-D Navier-Stokes method was used to solve flow field around aGA(W)-1 airfoil with a fowler flap. Commercial programs including Visual-Doc, Gambit/Tgridand Fluent were used. Upper surface shape and the flap gap were optimized and lift for landing condition was improved considerably. The original and optimized flaps were tested in the KARI's 1-m low speed wind tunnel to examine changes in aerodynamic characteristics. For optimized flap tests, the similar trend to prediction could be seen but stall angle of attack was lower than what was expected. Also, less gap than optimized design delayed stall and produced better lift characteristics. This is believed to be the effect of turbulence model.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.5 no.2
• /
• pp.24-31
• /
• 2001

An axial-type turbine design technology is developed. In order to design one-stage turbine, the preliminary design method is applied, and then design parameters are chosen after analyzing gas properties within the turbine passage using the streamline curvature method. Stator blade is designed using C4 profile, and rotor blade is designed using shape parameters. Stator is manufactured as an integral type and rotor is manufactured to be disassembled from the disc for changing blade incidence angle. The output power from the rotor is measured with various RPM and input power. Experimental results show that the maximum efficiency of turbine rotor is obtained on the design point, and the output power is proportionally decreased with the negative incidence angle even the test turbine is a reaction turbine. The efficiency of turbine rotor is decreased to 5% by $7.5^{\cire}$ negative incidence angle from the designed value.

• Journal of Aerospace System Engineering
• /
• v.10 no.4
• /
• pp.11-16
• /
• 2016

In this paper, an experimental study on the aerodynamic characteristics of a variable span wing flying inside a channel guideway is accomplished using wind tunnel testing. A variable span wing with a NACA 0012 airfoil section was fabricated and actuated using a linear servo motor. The aerodynamic effects of 1) wing aspect ratio, 2) ground effect, and 3) the gap between the wingtip and the wing fence were investigated. It was found that both ground effect and wing fence gap increased lift. Also, the wing fence gap does not significantly affect drag. Therefore, it was found that a variable span mechanism can be used as an effective high lift device when flap use is limited.

• 한국신재생에너지학회:학술대회논문집
• /
• 2011.11a
• /
• pp.34.1-34.1
• /
• 2011

풍력발전기 블레이드 설계에 적용하기 위한 에어포일의 선택 혹은 설계에 있어서 가장 중요한 요소 가운데 하나는 표면 거칠기 변화에 따른 에어포일 성능의 민감도이다. 블레이드 표면은 대기 중의 먼지, 곤충 시체 등에 따라 계속적으로 오염되며 이는 에어포일의 설계 당시의 성능을 계속적으로 저감시킨다. 이러한 표면 거칠기의 증가는 에어포일의 종류에 따라 성능을 50% 이상 저감시키며 이는 블레이드의 설계 성능을 저감시키므로 블레이드 설계를 위한 에어포일 선정 단계에서 표면거칠기 민감도가 가능한 낮은 에어포일을 선정하여 블레이드의 공력 설계를 수행하게 된다. 본 연구에서는 표면 거칠기 변화로 인한 에어포일의 성능 저감이 실제 블레이드의 성능에 어떠한 영향을 주는지를 살펴 보았다. 에어포일은 표면이 깨끗한 상태와 ZZ 테입을 부착하여 표면이 심각하게 오염된 상황을 모사하여 두 경우 모두를 풍동 시험한 DU 에어포일 시리즈를 선정하였다. 3MW 급의 블레이드에 대하여 두께비 40%~18%의 에어포일을 적용하여 설계를 수행하였으며 두께비 30%~18%에어포일에 대하여 표면이 깨끗한 경우와 오염된 경우의 데이터를 적용하여 블레이드 성능 변화 및 다른 성능 변수들의 변화를 살펴보았다. 블레이드 성능에 대하여는 BEMT를 적용하여 설계 및 시뮬레이션을 수행하였다. 연구 결과 에어포일의 성능 저하는 블레이드 공력 효율에 있어서 8%의 저감을 나타내며 7%의 극한하중 저감을 보이는 것으로 나타났다.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2005.05a
• /
• pp.692-697
• /
• 2005

A canard type aircraft, which has good wing stall and stall/spin proof characteristics, is being developed. The previous first and second prototypes, having full depth core sandwich type wing and fixed landing gear, was built for test flights. Newly developing Firefly will be equipped with retractable landing gear and conventional foam core sandwich laminate for wing and fuselage. For manufacturing, composite material process has been studied including coupon tests. Wet lay-up onto foam core with glass fabric using lay-up mold has been chosen, and composite material parts are cured under room temperature and atmospheric pressure condition. In general, molded parts show so good surface smoothness and standardized quality that are best in mass production. In this study, we present the mold technology and development status for small aircraft firefly.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.34 no.5
• /
• pp.12-18
• /
• 2006

A new steady approach has been developed to predict the transonic buffet onset of a high speed aircraft. In this paper, the flow is assumed to be steady for the buffet onset. The present study involves the analysis of a distinct change in the variation of various static aerodynamic parameters. These distinct changes indicates the onset of transonic buffet. Among the various aerodynamic parameters considered in this study, the variation in the center of pressure has shown to provide a clearest indicator of transonic buffet onset. This new steady approach can be applied to predict the transonic buffet onset for airfoils with shock induced separation bubble and for large swept wings with small aspect ratios. Good agreements have been obtained compared with unsteady wind tunnel buffet test data. Based on the results obtained the new steady approach, it can be newly suggested that the distinct slope changes of the center of pressure curve can be used as an indicator of buffet onset for the steady experimental method on a full aircraft configuration.