• Journal of the Microelectronics and Packaging Society
• /
• v.23 no.2
• /
• pp.91-96
• /
• 2016

In this study, effects of demolding temperature (DT) on the formability and optical properties were evaluated in order to optimize thermal nanoimprint lithography for anti-reflective film. Characterization on optical property showed that optical performance was gradually enhanced as the DT increased up to $70^{\circ}C$ while the transmittance and the reflectance was degraded as the DT increased further to $100^{\circ}C$. In addition, similar behavior was observed from formability analysis. It was contributed to the formation of free volume and viscose flow. Therefore, it was concluded that the formability and optical property are highly influenced by the formation of free volume and viscous flow of polymer depending on the DT.

• 한국전자현미경학회:학술대회논문집
• /
• 2001.11a
• /
• pp.37-38
• /
• 2001

• Proceedings of the Korea Concrete Institute Conference
• /
• 2010.05a
• /
• pp.277-278
• /
• 2010

This study aims for development of an addition-typed releasing agent, which has improved basic properties leading to reducing defects that commonly occur in releasing agents, such as surface damage, and capable of shortening finish processing.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.06a
• /
• pp.219-219
• /
• 2007

Ni stamper위에 100nm의 Si 코팅후 자기조립 단문자막(SAM)을 액상 코팅방식으로 형성 하였고, 내구성 및 열적 안정성을 검증하기 위해 반복적인 이형 및 압력인가test가 실시하였다. 20 회 이상의 이형실험을 통해 열적, 기계적 안정성을 확인하고, 접촉각 측정을 통해 이형특성의 안정성도 고찰하였다. 이를 Imprint공법을 적용 fine pattern의 구조물을 얻을수 있었다. SAM코팅은 TRICHLOROSILANE을 사용하였으며 Hexane과 1000:1의 비율로 섞어서 stirrer에서 mixing하는 방식을 사용했으며, UV-ozone처리를 통한 이형성 제거 효과도 관찰하였다.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.11a
• /
• pp.209-209
• /
• 2007

Ni stamper위에 100nm의 Si 코팅후 자기조립 단분자막(SAM)을 액상 코팅방식으로 형성 하였고, 내구성 및 열적 안정성을 검증하기 위해 반복적인 이형 및 압력인가 test가 실시하였다. 20회 이상의 이형실험을 통해 열적, 기계적 안정성을 확인하고, 접촉각 측정을 통해 이형특성의 안정성도 고찰하였다. 이를 Imprint공법을 적용 fine pattern의 구조물을 얻을 수 있었다. SAM코팅은 TRICHLOROSILANE을 사용하였으며 Hexane과 1000:1의 비율로 섞어서 stirrer에서 mixing하는 방식을 사용했으며, UV-ozone처리를 통한 이형성 제거 효과도 관찰하였다.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.46 no.6
• /
• pp.429-433
• /
• 2001

This study was carried out to investigate the occurrence and characteristics of off-type rice plant according to agronomic conditions. The occurrence density of the off-type rice plant in farmer's paddy field was greater as the years of self-produced seed use increased, and in the direct sowing paddy field it was twice as much as in the transplanting paddy field. When the long-grain red rice and the short-grain red rice in the cultivated field of cultivar were artificially sown, in the direct sowing on a flooded paddy surface culture rather than in the machine transplanting culture the off-type rice plant occurred much more, the culm length was longer, and the number of productive culm per plant increased. These characteristics were more conspicuous in the long-grain red rice than in the short-grain red rice. In the transplanting farmer's paddy fields, the off-type rice plant that occurred outside of the hills of the cultivar rice ranged 0 to 6%. Whereas in was 70.6 to 91.9% when the long-grain red rice and short-grain red rice were artificially sown. Therefore, it was assumed that most of the off-type rice plants occurred in the farmer's paddy fields was caused by seed contamination.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2011.05a
• /
• pp.319-324
• /
• 2011

최근 자연환경보전이라는 새로운 패러다임의 대두로 하천의 생태기능 향상을 위한 호안조성공법 중 하나인 식생매트호안 공법의 적용이 증가하고 있다. 국내 하천의 경우 비교적 큰 하상계수와 소류력의 증가로 식생매트 고정용 앵커핀의 기능 저하에 따른 호안의 피해가 발생하고 있다. 그러나 앵커핀의 외력저항성 연구 및 설치를 위한 기준이 마련되어 있지 않는 실정이다. 본 연구에서는 앵커핀의 인발특성을 연구함으로서 외력저항 특성을 파악하고자 하였다. 연구방법으로는 앵커핀을 관입시킨 토사에 인발장치를 연결하여 최대인발력과 인발력의 변화추이를 관찰하였다. 실험에 사용된 토사는 물다짐으로 다졌으며, 앵커핀은 식생매트 고정용으로 적용이 많은 이형철근형 앵커핀을 사용하였다. 대조군으로 형태가 동일한 원형철근을 이용하여 앵커핀을 제작 실험에 사용하였다. 실험조건은 앵커핀의 직경(10mm, 16mm)에 따른 주면과 침수토사의 배수시간 (48hr, 96hr, 144hr) 조절을 통한 함수율의 변화에 따른 인발특성을 관측하였다. 실험결과 평균 최대인발력의 변화는 48시간 배수시 직경변화에 따라 이형철근은 12.8N, 28N, 원형철근은 10.6N, 21N으로 나타났으며, 96시간 배수시 이형철근은 18.8N, 33N, 원형철근은 12.2N, 21.6N으로 나타났고, 144시간 배수시 이형철근은 21.4N, 36.4N, 원형철근은 20.4N, 33.2N으로 나타났다. 앵커핀의 인발력은 주면의 크기에 비례하며, 표면의 형태와 함수량에 따라 영향을 받는 것으로 나타났다. 따라서 이러한 앵커핀의 인발 특성을 파악하고, 식생호안에 적용한다면 피해를 최소화 할 수 있을 것으로 사료된다.

• Proceedings of the Korean Ceranic Society Conference
• /
• 2003.04a
• /
• pp.160.1-160
• /
• 2003

• Proceedings of the Korean Ceranic Society Conference
• /
• 2003.04a
• /
• pp.188.2-188
• /
• 2003

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.46 no.3
• /
• pp.170-175
• /
• 2001

This study was carried out to investigate the distribution and characteristics of off-type rice plant in farmer's paddy field. The ratio of the field contaminated by off-type rice was highest in the southwestern area, followed by the southeastern area, the central area in Korea. The occurrence density of off-type rice was higher in the southern area than the central area. The short-grain red rice was the most dominant off-type rice group, followed by extremely late and sterile rice group and long-grain red rice group in Korea. The long-grain red rice group was dominant in Jeonnam and Kyongnam, and the extremely late and sterile rice group was dominant in Jeonbuk, and the short-grain red rice group in the other provinces. The culm length of most off-type rice groups growing in the farmer's paddy fields was longer than the farmer's cultivars, and the long-grain red rice group and the short-grain red rice group were especially longer. The number of spikelets per panicle of the off-type rice groups were generally greater than the farmer's cultlvars, and in particular, the extremely late and sterile rice group and the long-grain normal rice group had more spikelet per panicle. Most of the off-type rice groups were extremely sterile.